Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
9 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 6A New Electro-Biomembrane Integrated Renewable-Based System To Produce Power, Fresh Water and Hydrogen for Sustainable Communities(Elsevier, 2025) Goren, A. Yagmur; Dincer, Ibrahim; Khalvati, AliAs the consequences of global warming become more severe, it is more crucial than ever to capitalize on all locally accessible potential renewable energy sources and produce sufficient useable energy outputs to meet community demands while causing the least damage to the ecosystem. Therefore, this paper focuses on a unique parabolic trough collector solar system-powered electro-biomembrane unit that combines a heat and power system with fresh water, electricity and hydrogen production. The proposed integrated system contains the following subsystems: a combining parabolic trough collector solar system, an organic Rankine cycle, a steam Rankine cycle, a multi-stage flash desalination system, and an electro-biomembrane H2 and freshwater production system. A thorough analysis and parametric research are performed on the multigeneration system to determine how important characteristics affect system performance and evaluate the energy and exergy efficiencies, and exergy destruction levels for particular system elements. The study results show that solar irradiation is the most critical parameter for improving system performance. The highest freshwater production of 1,303,333.3 L/day is observed at the solar irradiation of 935,768 kWh/day. Furthermore, the combined output of three electricity production technologies exceeds 2,000,000 kWh/day, highlighting the ability of the system to harness solar thermal energy effectively. The study findings indicate that using solar power and biomass as renewable energy sources, the proposed integrated system provided 328.56 kg of biohydrogen per day. Overall, the energy and exergy efficiencies of the integrated system are obtained as 34.3 and 29.5 %, respectively.Article Citation - WoS: 5Citation - Scopus: 6Development of a Unique Integrated Bioreactor for Simultaneous Desalination and Bioenergy and Biohydrogen Production(Elsevier B.V., 2024) Yagmur Goren,A.; Dincer,I.; Khalvati,A.In the wastewater treatment challenge, it is really essential to develop integrated systems in reducing greenhouse gases, producing green energy and achieving sustainable development. In this regard, an integrated electro-biomembrane reactor was developed and performed in this study for simultaneous biohydrogen (bioH2) production from energetic poplar leaves using dark fermentation (DF) process, conventional H2 production, bioenergy production in the DF process, and saline water desalination in a single system. The results of this study showed that pH was the main controlling parameter in bioH2 production, and the superior production of 40.2 mL/g-biomass was obtained at a pH of 5.5. The maximum current and power density values were 2861.7 mW/m2 and 2819.4 mA/m2 at pH 5.5 under improved conditions. Furthermore, the maximum conventional H2 production was found to be 1341.6 mL using 2 M of KOH solution. Overall, the results further proved that the proposed integrated system can be a sustainable and promising process for industrial applications, considering its high desalination, energy production, and conventional and biological H2 production efficiencies. © 2024 The AuthorsArticle Citation - WoS: 4Citation - Scopus: 5Experimental Investigation of a Unique Electro-Biomembrane Based Integrated System for Wastewater Treatment and Simultaneous Clean Water, Hydrogen and Energy Production(Institution of Chemical Engineers, 2024) Goren,A.Y.; Dincer,I.; Khalvati,A.This paper concerns the design, development, and building of a unique electro-bio-membrane reactor for concurrent bioH2 production, desalination, and energy production by microorganisms in a single reactor. The effects of varying biomass amounts (5–50 g) and inoculum amounts (250–1500 mL) on the bioH2 production efficiency are also investigated. The lowest cumulative bioH2 yield of 24.2 mL/g is obtained using a biomass amount of 5 g, while it is 44.7 mL/g at a biomass amount of 50 g. The highest H2 production from water electrolysis is also found as 0.719 mL/min at improved conditions. Furthermore, the highest power and current density values are 2794.5 mW/m2 and 2786.1 mA/m2 at 1500 mL-inoculum, biomass amount of 30 g, initial pH of 5.5, and temperature of 37 °C in the dark fermentation (DF) cell. Moreover, the desalination efficiency increases from 41.6 to 65.8% with decreasing inoculum amounts from 1500 to 250 mL. © 2024 The Institution of Chemical EngineersArticle Citation - WoS: 7Citation - Scopus: 7Comprehensive Thermoeconomic Study of a New Solar Thermosyphon-Assisted Multigeneration System(Elsevier, 2023) Anamaq, Rasoul Najafi; Khani, Leyla; Mohammadpourfard, Mousa; Heris, Saeed Zeinali; Gökçen Akkurt, GüldenNowadays, due to the global energy crisis, limited reservoirs of fossil fuels, and their negative environmental effects, the use of renewable energy sources and multigeneration systems have become good alternatives for conventional thermodynamic systems. One of these resources, whose technology has developed rapidly in recent years, is the use of solar energy for the simultaneous generation of various products. Therefore, in this research, a multigeneration system with several subsystems is introduced. The proposed system includes a solar energy collector to receive thermal energy, two thermal energy storage tanks, an organic Rankine cycle, and a Kalina cycle to generate electricity, a multi-effect distillation unit to produce fresh water, an electrolyzer to produce hydrogen, as well as heat recovery for hot water and hot air generation. In this multigeneration system, the cooling unit is designed with the help of a thermosyphon. The performance of the proposed system is studied from energy, exergy, environmental, and exergoeconomic viewpoints using Aspen HYSYS and EES software. The obtained results show that due to the addition of the thermosyphon unit to the refrigeration system, the exergy efficiency increases from 55.62% to 70.26%. As a result of this combination, the performance of the whole system is improved and the amount of costs are reduced. In addition, the parabolic collector system has the highest exergy destruction ratio, 39%, among the subsystems. Furthermore, the results of the exergoeconomic analysis indicate that the PEM water heater with 33.3% and the ejector with 22.7% own the highest cost destruction rates.Article Citation - WoS: 13Citation - Scopus: 14Desalination and Detoxification of Textile Wastewater by Novel Photocatalytic Electrolysis Membrane Reactor for Ecosafe Hydroponic Farming(MDPI, 2022) Aydın, Muhammed Iberia; Özaktaç, Damla; Yüzer, Burak; Doğu, Mustafa; İnan, Hatice; Ökten, Hatice Eser; Coşkun, Serdar; Selçuk, HüseyinIn this study, a novel photoelectrocatalytic membrane (PECM) reactor was tested as an option for the desalination, disinfection, and detoxification of biologically treated textile wastewater (BTTWW), with the aim to reuse it in hydroponic farming. The anionic ion exchange (IEX) process was used before PECM treatment to remove toxic residual dyes. The toxicity evaluation for every effluent was carried out using the Vibrio fischeri, Microtox® test protocol. The disinfection effect of the PECM reactor was studied against E. coli. After PECM treatment, the 78.7% toxicity level of the BTTWW was reduced to 14.6%. However, photocatalytic desalination during treatment was found to be slow (2.5 mg L-1 min-1 at 1 V potential). The reactor demonstrated approximately 52% COD and 63% TOC removal efficiency. The effects of wastewater reuse on hydroponic production were comparatively investigated by following the growth of the lettuce plant. A detrimental effect was observed on the lettuce plant by the reuse of BTTWW, while no negative impact was reported using the PECM treated textile wastewater. In addition, all macro/micronutrient elements in the PECM treated textile wastewater were recovered by hydroponic farming, and the PECM treatment may be an eco-safe wastewater reuse method for crop irrigation.Article Citation - WoS: 5Citation - Scopus: 5Flat sheet metakaolin ceramic membrane for water desalination via direct contact membrane distillation(IWA Publishing, 2022) Zewdie, Tsegahun Mekonnen; Habtu, Nigus Gabbiye; Dutta, Abhishek; Van der Bruggen, BartHydrophobic metakaolin-based flat sheet membrane was developed via phase inversion and sintering technique and modified through 1H,1H,2H,2H-perfluorooctyltriethoxysilane grafting agents. The prepared membrane was characterized by different techniques such as XRD, FTIR, SEM, contact angle, porosity, and mechanical strength. Their results indicated that the wettability, structural, and mechanical properties of the prepared membrane confirm the suitability of the material for membrane distillation (MD) application. The prepared metakaolin-based flat sheet membrane acquired hydrophobic properties after surface modification with the water contact angle values of 113.2° to 143.3°. Afterward, the membrane performance was tested for different sodium chloride aqueous solutions (synthetic seawater) and various operating parameters (feed temperature, feed flow rate) using direct contact membrane distillation (DCMD). Based on the findings, the prepared membrane at metakaolin loading of 45 wt.% and sintered at 1,300 °C was achieved the best performance with >95% salt rejection and permeate flux of 6.58 + 0.3 L/m2 · h at feed temperature of 80 °C, feed concentration of 35 g/L, and feed flow rate of 60 L/h. It can be con-cluded that further optimization of membrane porosity, mechanical, and surface properties is required to maximize the permeate flux and salt rejection.Article Citation - WoS: 4Citation - Scopus: 12Carbon Dioxide Emissions Mitigation Strategy Through Enhanced Geothermal Systems: Western Anatolia, Turkey(Springer, 2022) Chandrasekharam, Dornadula; Baba, AlperAlthough Turkey is not the biggest GHG polluter, its emissions have increased by 110.4% since 1990. Currently, its CO2 emissions alone have crossed 400 Mt. Within the scope of 2 °C targets (2D scenario), the country can easily surpass this target test by increasing its renewable energy sources as a primary energy source mix, by developing its Enhanced Geothermal Sources (EGS) locked up in the radiogenic granites of western Anatolia. The radiogenic heat generated by these granites, spread over an area of 4221 sq. km, varies from 5.3 to 16.34 µW/m3. Based on the electricity generation capacity of granites from Soultz-sous-Forets and Cooper Basin EGS sites, the combined electricity generation capacity of Kestanbol and Kozak granite plutons is about 830 billion kWh. For the period extending from 2019 to 2023, Turkey is aiming at reducing the usage of gas for electricity generation from 29.9 to 20.7%, increasing the share of renewable energy sources from 32.5 to 38.8%, increasing the electricity production from local energy sources from 150 to 219 TWh and increasing the electricity usage per-capita from 3.7 to 4.3 MWh. These energy targets can be achieved by major contributions from hydrothermal and EGS energy sources. This review demonstrates that besides electricity and heat, EGS energy can be utilized, together with other renewable energy sources, such as hydrothermal, wind, and concentrated solar for providing fresh water through the desalination process. These energy sources would provide food, energy, and water security to the country for several decades.Article Citation - WoS: 58Citation - Scopus: 76Utilization of Renewable Energy Sources in Desalination of Geothermal Water for Agriculture(Elsevier, 2021) Tomaszewska, Barbara; Gökçen Akkurt, Gülden; Kaczmarczyk, Michal; Bujakowski, Wieslaw; Keleş, Nazlı; Jarma, Yakubu A.; Baba, Alper; Bryjak, Marek; Kabay, NalanThe agricultural sector, which is highly dependent on water, is urged to build on improved water management practices and explore available options to match supply and demand because of the water scarcity risks and a sustainable and productive agri-food chain. Geothermal water is an energy source used to generate electricity and/or heat. After harnessing its energy, the remaining water can be used as a water source for irrigation following treatment because of its high ionic content. Geothermal fields are mostly located in rural areas where agricultural activities exist. This would be a good match to decrease the transportation cost of irrigation water. The energy demand of the desalination process for agriculture is higher, requiring additional post-treatment processes. Fossil fuels to fulfill the energy requirements are becoming expensive, and greenhouse gas emissions are harmful to the environment. Thus, efforts should be directed towards integrating renewable energy resources into desalination process. This work focuses on presenting a comprehensive review of geothermal water desalination which is powered by renewable energy and provides specific cases from Turkey and Poland. Furthermore, possible new generation renewable energy systems in desalination are introduced, considering their potential application in the desalination of geothermal water for agricultural irrigation.Article Citation - WoS: 123Citation - Scopus: 131A New Methodology for Removal of Boron From Water by Coal and Fly Ash(Elsevier Ltd., 2004) Polat, Hürriyet; Vengosh, Avner; Pankratov, Irena; Polat, MehmetHigh levels of boron concentrations in water present a serious problem for domestic and agriculture utilizations. The recent EU drinking water directive defines an upper limit of 1 mgB/I. In addition, most crops are sensitive to boron levels >0.75 mg/1 in irrigation water. The boron problem is magnified by the partial (∼60%) removal of boron in reverse osmosis (RO) desalination due to the poor ionization of boric acid and the accumulation of boron in domestic sewage effluents. Moreover, high levels of boron are found in regional groundwater in some Mediterranean countries, which requires special treatment in order to meet the EU drinking water regulations. Previous attempts to remove boron employed boron-specific ion-exchange resin and several cycles of RO desalination under high pH conditions. Here, we present an alternative methodology for boron removal by using coal and fly ash as adsorbents. We conducted various column and batch experiments that explored the efficiency of boron removal from seawater and desalinated seawater using several types of coal and fly ash materials under controlled conditions (pH, liquid/solid ratio, time of reaction, pre-treatment, regeneration). We examined the effect of these factors on the boron removal capacity and the overall chemical composition of the residual seawater. The results show that the selected coal and fly ash materials are very effective in removing boron such that the rejection ratio of boron can reach 95% of the initial boron content under certain optimal conditions (e.g., pH = 9, L/S = 1/10, reaction time > 6 h). Our experiments demonstrated that use of glycerin enables regeneration of boron uptake into coal, but the boron uptake capacity of fly ash reduces after several cycles of treatment-reaction. The boron removal is associated with Mg depletion and Ca enrichment in the residual seawater and conversely with relative Mg enrichment and Ca depletion in the residual fly ash. We propose that the reaction of Ca-rich fly ash with Mg-rich seawater causes co-precipitation of magnesium hydroxide in which boron is co-precipitated. The new methodology might provide an alternative technique for boron removal in areas where coal and fly ash are abundant.