Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
12 results
Search Results
Article Citation - WoS: 187Citation - Scopus: 266Improvement of Barrier and Mechanical Properties of Whey Protein Isolate Based Food Packaging Films by Incorporation of Zein Nanoparticles as a Novel Bionanocomposite(Elsevier Ltd., 2016) Oymacı, Pelin; Alsoy Altınkaya, SacideIn this study, whey protein isolate (WPI) based bio-nanocomposite films embedded with zein nanoparticles (ZNP) were prepared by solution casting. Nanoparticles were coated with sodium caseinate to obtain a uniform distribution in the films. The mechanical, water vapor barrier, surface wetting, morphological and viscoelastic properties of the films were investigated. The addition of ZNP significantly improved the water vapor barrier and mechanical properties of the WPI without adversely affecting the elongation of the films. Dynamical mechanical analysis and contact angle measurements revealed that upon addition of the nanoparticles, the fractional free volume and hydrophilicity of the WPI films decreased. Sodium caseinate containing both hydrophilic and hydrophobic groups created an efficient interface between the hydrophobic ZNP and hydrophilic WPI matrix, allowing for a homogeneous distribution of nanoparticles even at very high loading levels as evidenced by the scanning electron microscope (SEM) and atomic force microscopy (AFM) images. The WPI/ZNP nanocomposite films can potentially become effective food packaging materials.Article Citation - WoS: 62Citation - Scopus: 75Specimen Size Effect on the Residual Properties of Engineered Cementitious Composites Subjected To High Temperatures(Elsevier Ltd., 2014) Erdem, Tahir KemalIn this study, size effect on the residual properties of Engineered Cementitious Composites (ECC) was investigated on the specimens exposed to high temperatures up to 800 C. Cylindrical specimens having different sizes were produced with a standard ECC mixture. Changes in pore structure, residual compressive strength and stress-strain curves due to high temperatures were determined after air cooling. Experimental results indicate that despite the increase of specimen size, no explosive spalling occurred in any of the specimens during the high temperature exposure. Increasing the specimen size and exposure temperature decreased the compressive strength and stiffness. Percent reduction in compressive strength and stiffness due to high temperature was similar for all specimen sizes.Article Citation - WoS: 77Citation - Scopus: 93Improving the Workability and Rheological Properties of Engineered Cementitious Composites Using Factorial Experimental Design(Elsevier Ltd., 2013) Şahmaran, Mustafa; Bilici, Zafer; Özbay, Erdoğan; Erdem, Tahir Kemal; Yücel, Hasan Erhan; Lachemi, MohamedIn the development of Engineered Cementitious Composites (ECC), micromechanics-based design theory is adopted to properly select the matrix constituents, fiber, and fiber-matrix interface properties to exhibit strain hardening and multiple cracking behaviors. Despite the micromechanics design constraints, practical applications show that the workability and rheological properties of matrix can affect the fiber dispersion uniformity, which have also direct concerns on composite mechanical properties. For this reason, in this research, parameters of micromechanics-based optimized ECC mixture design, which most possibly affecting the workability and rheological properties, are investigated. An experimental program that contains 36 different ECC mixtures was undertaken to quantitatively evaluate the combined effects of the following factors on workability and rheological properties: water-binder (w/b), sand-binder (s/b), superplasticizer-binder (SP/b) ratios and maximum aggregate size (Dmax). A mini-slump cone, a Marsh cone and a rotational viscometer were used to evaluate the workability and rheological properties of ECC mixtures. Compressive strength and four point bending tests were used for mechanical characteristics of ECC mixtures at 28 days. The effects of studied parameters (w/b, s/b, SP/b and Dmax) were characterized and analyzed using regression models, which can identify the primary factors and their interactions on the measured properties. Statistically significant regression models were developed for all tested parameters as function of w/b, s/b, SP/b and Dmax. To find out the best possible ECC mixture under the range of parameters investigated for the desired workability and mechanical characteristics, a multi-objective optimization problem was defined and solved based on the developed regression models. Test results indicate that w/b, s/b and SP/b parameters affect the rheological and workability properties. On the other hand, for the range of studied aggregate sizes, Dmax is found to be statistically insignificant on the rheological and workability properties of ECC.Article Citation - WoS: 33Citation - Scopus: 41Development of Novel Multilayer Materials for Impact Applications: a Combined Numerical and Experimental Approach(Elsevier Ltd., 2009) Taşdemirci, Alper; Hall, Ian W.A well-verified and validated numerical model was used to investigate stress wave propagation in a multilayer material subjected to impact loading. The baseline material consisted of a ceramic faceplate and composite backing plate separated by a rubber or teflon foam interlayer: several variants were investigated in which the number, type, and total thicknesses of the interlayers were altered. Comparison of the variants showed that the use of multiple teflon foam interlayers could drastically reduce the average stress in the multilayer material. Based on the numerical results, further experimental work was undertaken upon one of the variants. Very large and unexpected tensile stress oscillations were observed in the ceramic layers, leading to a refinement of the numerical model which successfully reproduced the oscillations and also demonstrated that separation of the sample layers led to trapping of the stress wave within the layers. Use of the validated numerical model allowed detailed analysis of the processes of wave transmission and demonstrates the important synergy that can exist between experimental and modeling studies. The current study provides a valuable starting point for designing future multilayer materials with specific, controlled properties.Article Citation - WoS: 78Citation - Scopus: 106Critical Aspects Related To Processing of Carbon Nanotube/Unsaturated Thermoset Polyester Nanocomposites(Elsevier Ltd., 2007) Seyhan, Abdullah Tuğrul; Gojny, Florian H.; Tanoğlu, Metin; Schulte, KarlCarbon nanotubes (CNTs) have outstanding mechanical, thermal and electrical properties. As a result, particular interest has been recently given in exploiting these properties by incorporating carbon nanotubes into some form of matrix. Although unsaturated polyesters with styrene have widespread use in the industrial applications, surprisingly there is no study in the literature about CNT/thermoset polyester nanocomposite systems. In the present paper, we underline some important issues and limitations during the processing of unsaturated polyester resins with different types of carbon nanotubes. In that manner, 3-roll mill and sonication techniques were comparatively evaluated to process nanocomposites made of CNTs with and without amine (NH2) functional groups and polyesters. It was found that styrene evaporation from the polyester resin system was a critical issue for nanocomposite processing. Rheological behaviour of the suspensions containing CNTs and tensile strengths of their resulting nanocomposites were characterized. CNT/polyester suspensions exhibited a shear thinning behaviour, while polyester resin blends act as a Newtonian fluid. It was also found that nanotubes with amine functional groups have better tensile strength, as compared to those with untreated CNTs. Transmission electron microscopy (TEM) was also employed to reveal the degree of dispersion of CNTs in the matrix.Article Citation - WoS: 71Citation - Scopus: 87Influence of Surface Modification of Fillers and Polymer on Flammability and Tensile Behaviour of Polypropylene-Composites(Elsevier Ltd., 2006) Demir, Hasan; Balköse, Devrim; Ülkü, SemraAn intumescent system consisting of ammonium polyphosphate (APP) as an acid source and blowing agent, pentaerythritol (PER) as a carbonific agent and natural zeolite (clinoptilolite, Gördes II) as a synergistic agent was used in this study to enhance flame retardancy of polypropylene (FR-PP). Zeolite was incorporated into flame retardant formulation at four different concentrations (1, 2, 5, and 10 wt%) to investigate synergism with the flame retardant materials. Filler content was fixed at 30 wt% of total amounts of flame retardant PP composites. Zeolite and APP were treated with two different coupling agents namely, 3-(trimethoxysilyl)-1-propanethiol and (3-aminopropyl)-triethoxysilane for investigation of the influence of surface treatments on mechanical properties and flame retardant performance of composites. Maleic anhydride grafted polypropylene (MAPP) was used for making polypropylene hydrophilic. Flammability of FR-PP composites was measured by the determination of limiting oxygen index (LOI). The LOI values reached to a maximum value of 41% for mercapto silane treated APP:PER (2:1) PP composite containing 5 wt% zeolite. The tensile strength of composites was increased by the addition of MAPP and elongation at break of composites was increased with silane treatments.Article Citation - WoS: 17Citation - Scopus: 20Numerical and Experimental Studies of Damage Generation in a Polymer Composite Material at High Strain Rates(Elsevier Ltd., 2006) Taşdemirci, Alper; Hall, Ian W.Samples of S2-glass/epoxy composites have been subjected to microstructural investigation after testing in compression at quasi-static and high strain rates using the split Hopkinson pressure bar. A numerical model was developed that accurately describes the high strain rate mechanical response of the samples. Moreover, in contrast with earlier phenomenological or constitutive models, the model can also predict a variety of failure modes such as delamination, matrix cracking or fiber crushing. High-speed photography was used to check the model results. Interrupted tests, followed by metallographic examination, have revealed that the sequence of damage events differs between quasi-static and high strain rate regimes. The effect of sample size on measured mechanical properties is noted and is confirmed via numerical modeling.Article Citation - WoS: 143Citation - Scopus: 164Mechanical and Thermal Behavior of Non-Crimp Glass Fiber Reinforced Layered Clay/Epoxy Nanocomposites(Elsevier Ltd., 2007) Bozkurt, Emrah; Kaya, Elçin; Tanoğlu, MetinMechanical and thermal properties of non-crimp glass fiber reinforced clay/epoxy nanocomposites were investigated. Clay/epoxy nanocomposite systems were prepared to use as the matrix material for composite laminates. X-ray diffraction results obtained from natural and modified clays indicated that intergallery spacing of the layered clay increases with surface treatment. Tensile tests indicated that clay loading has minor effect on the tensile properties. Flexural properties of laminates were improved by clay addition due to the improved interface between glass fibers and epoxy. Differential scanning calorimetry (DSC) results showed that the modified clay particles affected the glass transition temperatures (T g) of the nanocomposites. Incorporation of surface treated clay particles increased the dynamic mechanical properties of nanocomposite laminates. It was found that the flame resistance of composites was improved significantly by clay addition into the epoxy matrix.Article Citation - WoS: 183Citation - Scopus: 190The Effect of Interfacial Interactions on the Mechanical Properties of Polypropylene/Natural Zeolite Composites(Elsevier Ltd., 2004) Metin, Dildare; Tıhmınlıoğlu, Funda; Balköse, Devrim; Ülkü, SemraThe effect of interfacial interactions on the mechanical properties of polypropylene (PP)/natural zeolite composites was investigated under dry and wet conditions. Interfacial interactions were modified to improve filler compatibility and mechanical properties of the composites by surface treatment of natural zeolite with a non-ionic surface modifier; 3 wt% polyethylene glycol (PEG) and three different types of silane coupling agents; 3-aminopropyltriethoxysilane (AMPTES), methyltriethoxysilane (MTES) and 3-mercaptopropyltrimethoxysilane (MPTMS), at four different concentrations (0.5-2 wt%). PP composites containing (2-6 wt%) zeolite were prepared by an extrusion technique. The tensile properties of the composites determined as a function of the filler loading and the concentration of the coupling agents were found to vary with surface treatment of zeolite. Silane treatment indicated significant improvements in the mechanical properties of the composites. According to the dry and wet tensile test results, the maximum improvement in the mechanical properties was obtained for the PP composites containing 1 wt% AMPTES treated zeolite. The improvement in the interfacial interaction was confirmed using a semi-empirical equation developed by Pukanszky. Good agreement was obtained between experimental data and the Pukanszky model prediction. Scanning electron microscopy studies also revealed better dispersion of silane treated filler particles in the PP matrix.Article Citation - WoS: 47Citation - Scopus: 62Transverse and Longitudinal Crushing of Aluminum-Foam Filled Tubes(Elsevier Ltd., 2002) Hall, Ian W.; Güden, Mustafa; Claar, Terry DennisAl-foam filled and empty tubes of aluminum, brass and titanium were compression tested laterally. The specific energy absorption in filled tubes increased greatly in terms of percentages, and was greatest in aluminum tubes. In transversely tested tubes the foam deformed laterally showing a capability of spreading the deformation.