Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Article Citation - WoS: 48Citation - Scopus: 49The Effect of Rare Earth Element Doping on the Microstructural Evolution of Sol-Gel Titania Powders(Elsevier Ltd., 2017) Yurtsever, Hüsnü Arda; Çiftçioğlu, MuhsinThe development of a better understanding of the low temperature nanophase evolution of high surface area titania (TiO2) based powders is essential for their use in photocatalytic applications. A series of rare earth (RE) element doped TiO2 powders were prepared by sol-gel processing. The effects of RE doping level, ionic size and heat treatment temperature on the nanophase structure evolution and the dopant ion location in TiO2 main matrix were investigated. Anatase was determined to be the main phase up to 900 °C at all doping levels for all REs. Anatase to rutile phase transformation was inhibited by RE doping. The inhibitory effect of REs increased with increasing ionic radius. Oxide phases of La, Nd, Pr, Sm were not present up to 5% and Nd4Ti9O24 phase was formed at 10% doping level at 800 °C. The formation of RE2Ti2O7 phases were determined for the REs with relatively lower ionic radii at 800 °C.Article Citation - WoS: 36Citation - Scopus: 39Transesterification of Sunflower Oil on Single Step Sol-Gel Made Al2o3 Supported Cao Catalysts: Effect of Basic Strength and Basicity on Turnover Frequency(Elsevier Ltd., 2012) Umdu, Emin Selahattin; Şeker, ErolThe activities of single step sol-gel made calcium oxide on alumina catalysts were studied as a function of CaO loading, methanol/oil molar ratio and the amount of the catalyst in the transesterification of sunflower oil at 50°C. Also, the turnover frequency (TOF) of the catalysts was calculated to better understand the relationship between the basicity/basic strength and the catalytic activity. From volcano curve (TOF vs. basic strength), it was found that under 50°C and methanol/oil molar ratio of 9, 60% CaO/Al 2O 3 had the highest turnover frequency, 0.028s -1, whereas 85% CaO/Al 2O 3 showed the highest biodiesel yield, ∼96.6%, but TOF obtained on it was 0.012s -1. It seemed that 60% CaO catalyst had the proper basic strength to obtain the highest TOF. © 2011 Elsevier Ltd.Article Citation - WoS: 15Citation - Scopus: 17Preparation of Particulate/Polymeric Sol-Gel Derived Microporous Silica Membranes and Determination of Their Gas Permeation Properties(Elsevier Ltd., 2010) Topuz, Berna; Çiftçioğlu, MuhsinMonodisperse silica sols with well-defined spherical particles ranging in size from 5 to 310 nm were prepared through Stober process. Both particulate and polymeric sol-gel routes were employed for the preparation of stable silica sols. The use of polymeric species in combination with particulate silica spheres may allow the design of predefined membrane pore structures with high thermal stability by cubic/random/close packing of monodisperse spherical particles incorporated into the polymeric network. The size and volume content of spheres were varied in order to modify the consolidation behaviour of 2-structural silica membranes which would enhance the thermal stability. The low shrinkage level for sphere loaded 2-structural systems compared to the pure polymeric counterparts might be explained by the decrease in the structural free energy of the polymeric/particulate 2-structural system. The thermal stability of the microporous membranes may thus be improved by incorporating particulates into the polymeric network through the formation of a lower extent of thermally induced microcrack formation. The N2 permeation through 90 nm silica sphere added silica membranes remained constant when they were heat treated in the 250-400 °C range indicating the stability of the pore network. © 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 273Citation - Scopus: 327Transesterification of Nannochloropsis Oculata Microalga's Lipid To Biodiesel on Al2o3 Supported Cao and Mgo Catalysts(Elsevier Ltd., 2009) Umdu, Emin Selahattin; Tuncer, Mert; Şeker, ErolIn this study, we present the activities of Al2O3 supported CaO and MgO catalysts in the transesterification of lipid of yellow green microalgae, Nannochloropsis oculata, as a function of methanol amount and the CaO and MgO loadings at 50 °C. We found that pure CaO and MgO were not active and CaO/Al2O3 catalyst among all the mixed oxide catalysts showed the highest activity. Not only the basic site density but also the basic strength is important to achieve the high biodiesel yield. Biodiesel yield over 80 wt.% CaO/Al2O3 catalyst increased to 97.5% from 23% when methanol/lipid molar ratio was 30.Article Citation - WoS: 46Citation - Scopus: 53Preparation and Characterization of Fe2o3-Tio2 Thin Films on Glass Substrate for Photocatalytic Applications(Elsevier Ltd., 2006) Çelik, Erdal; Yıldız, A. Y.; Ak Azem, Necmiye Funda; Tanoğlu, Metin; Toparlı, Mustafa; Emrullahoğlu, Ö. Faruk; Özdemir, İ.Fe2O3-TiO2 coatings were successfully prepared on glass slide substrates using sol-gel method for photocatalytic applications. The phase structure, thermal, microstructure and surface properties of the coatings were extensively characterized by using X-ray diffractometry (XRD), differential thermal analysis/thermograviometry (DTA/TG), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Their adhesion and absorbance properties were investigated by a scratch tester and UV-vis spectroscopy. Four different solutions were prepared by changing Fe/Ti molar ratios. Glass substrates were coated by solutions of Ti-alkoxide, Fe-chloride, glaciel acetic acid and isopropanol. The obtained gel films were dried at 300 °C for 10 min and subsequently heat-treated at 500 °C for 5 min in air. The oxide thin films were annealed at 600 °C for 60 min in air. The influence of Fe3+ concentration and number of layers on structure of the films was established. In addition, XRD results revealed that Fe2O3-TiO2 films composed of TiO2, Fe2Ti3O9, Ti3O5 and Fe3O4 phases. According to DTA/TG result, it was determined that endothermic and exothermic reactions were formed at temperatures between 80 and 650 °C due to solvent removal, combustion of carbon based materials and oxidation of Fe and Ti. SEM observations exhibited that the coating structure becomes more homogeneous depending on an increase of Fe/Ti molar ratios and thus a regular surface morphology forms with increasing Fe/Ti ratio. It was also seen that as the Fe/Ti ratio increases the surface roughness of the films increases. Critical adhesion force of thin films with Fe/Ti ratio of 0, 0.07, 0.18 and 0.73 were found to be 9, 25, 28 and 21 mN, respectively. The methylene blue solutions photocatalyzed by TiO2 based thin films shows characteristic absorption bands at 420 nm.