Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Article Citation - WoS: 35Citation - Scopus: 38Influence of Sulfurization Temperature on Cu2znsns4 Absorber Layer on Flexible Titanium Substrates for Thin Film Solar Cells(IOP Publishing Ltd., 2018) Buldu, Dilara Gökçen; Cantaş, Ayten; Türkoğlu, Fulya; Akça, Fatime Gülşah; Meriç, Ece; Özdemir, Mehtap; Tarhan, Enver; Özyüzer, Lütfi; Aygün, GülnurIn this study, the effect of sulfurization temperature on the morphology, composition and structure of Cu2ZnSnS4 (CZTS) thin films grown on titanium (Ti) substrates has been investigated. Since Ti foils are flexible, they were preferred as a substrate. As a result of their flexibility, they allow large area manufacturing and roll-to-roll processes. To understand the effects of sulfurization temperature on the CZTS formation on Ti foils, CZTS films fabricated with various sulfurization temperatures were investigated with several analyses including x-ray diffraction (XRD), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy and Raman scattering. XRD measurements showed a sharp and intense peak coming from the (112) planes of the kesterite type lattice structure (KS), which is strong evidence for good crystallinity. The surface morphologies of our thin films were investigated using SEM. Electron dispersive spectroscopy was also used for the compositional analysis of the thin films. According to these analysis, it is observed that Ti foils were suitable as substrates for the growth of CZTS thin films with desired properties and the sulfurization temperature plays a crucial role for producing good quality CZTS thin films on Ti foil substrates.Article Citation - WoS: 42Citation - Scopus: 46Importance of Cds Buffer Layer Thickness on Cu2znsns4-Based Solar Cell Efficiency(IOP Publishing Ltd., 2018) Cantaş, Ayten; Türkoğlu, Fulya; Meriç, Ece; Akça, Fatime Gülşah; Özdemir, Mehtap; Tarhan, Enver; Özyüzer, Lütfi; Özyüzer, Gülnur AygünCu2ZnSnS4 (CZTS) thin films were grown on Mo-coated soda lime glass (SLG) substrates by the sulfurization of DC magnetron-sputtered Zn, Sn and Cu metallic precursors under a sulfur atmosphere at 550 °C for 45 min. Understanding the composition and structure of the CZTS absorber layer is necessary to obtain efficient solar cells. With this aim, x-ray diffractometry, Raman spectroscopy, scanning electron microscopy, energy dispersive spectroscopy and x-ray photoelectron spectroscopy were used to investigate the CZTS absorber layers. CZTS absorber films were obtained and found to be Cu-poor and Zn-rich in composition, which are both qualities desired for efficient solar cells. CdS was used as a buffer layer and was grown by the chemical bath deposition technique. The optical properties of CdS films on SLG were searched for using a spectroscopic ellipsometer and the results revealed that the bandgap increases with film thickness increment. CZTS-based solar cells with different CdS buffer layer thicknesses were prepared using a SLG/Mo/CZTS/CdS/ZnO/AZO solar cell configuration. The influence of the CdS buffer layer thickness on the performance of the CZTS solar cells was investigated. Device analysis showed that electrical characteristics of solar cells strongly depend on the buffer layer's thickness. Highly pronounced changes in V OC, fill factor and J SC parameters, which are the main efficiency limiting factors, with changing buffer layer thicknesses were observed. Our experiments confirmed that decreasing the CdS thickness improved the efficiency of CZTS solar cells down to the lowest thickness limit.Article Citation - WoS: 13Citation - Scopus: 13Fourcross Shaped Metamaterial Filters Fabricated From High Temperature Superconducting Ybco and Au Thin Films for Terahertz Waves(IOP Publishing Ltd., 2017) Demirhan, Yasemin; Alaboz, Hakan; Nebioğlu, Mehmet Ali; Mulla, B.; Akkaya, M.; Altan, Hakan; Sabah, Cumali; Özyüzer, LütfiIn this study, we present a new, unique fourcross shaped metamaterial terahertz (THz) filter fabricated from both gold thin films and YBa2Cu3O7-δ high Tc superconducting thin films. A commercial electromagnetic simulation software, CST Microwave Studio, is used to design and optimize the metamaterial filter structures. The proposed fourcross shaped rectangular filter structure consists of periodic metallic rings where strip lines are located at the sides of the ring. Fourcross metamaterial filters are fabricated by using e-beam lithography and ion beam exhing techniques. Terahertz time-domain spectroscopy measurements validated the design predictions for both the center frequencies and bandwidths of the resonances due to the fourcross structures. The resonance switching of the transmission spectra was investigated by lowering the temperature below the critical transition temperature. This resonance switching effect is not observed in filters made up of metals. This novel fourcross rectangular resonator with a temperature-dependent resonance behavior holds great potential for active, tunable and low loss THz devices for imaging, sensing, and detection applications.Article Citation - WoS: 6Citation - Scopus: 6Influence of Buffer Layers on Ni Thin Film Structure and Graphene Growth by Cvd(IOP Publishing Ltd., 2015) Özçeri, Elif; Selamet, YusufBuffer and/or adhesive layers were used to decrease the dewetting of Ni thin film at graphene growth temperatures of around 900 °C. Depositing a thin buffer (Al2O3) layer onto SiO2/Si substrate significantly reduced the dewetting effect and surface roughness of Ni catalyst film. Thin adhesive (Cr) layers with or without Al2O3 buffer layers increased the texturing in (1 1 1) orientation, which was promoted by growing at an elevated temperature (450 °C). The effects of pretreatment and growth temperature on crystal orientation, grain size and surface roughness of Ni film were analyzed. Our results indicated a large positive correlation coefficient between the film thickness and surface roughness for thinner and non-buffered films, and a negative correlation coefficient between the thickness and 900 °C -annealed film roughness for thicker and buffered films. The graphene coverage was greatly improved over the films grown with Al2O3 and/or Cr layers. In summary, we suggest that growing high quality, large area, 1- or 2-layer graphene on polycrystalline Ni transition metal thin film is optimized by using Al2O3 and/or Cr layers to reduce Ni dewetting, surface roughness, and groove depth while controlling grain size and texturing in (1 1 1) orientation by annealing at 900 °C.Article Citation - WoS: 12Citation - Scopus: 15Local Oxidation Nanolithography on Hf Thin Films Using Atomic Force Microscopy (afm)(IOP Publishing Ltd., 2009) Büyükköse, Serkan; Okur, Salih; Özyüzer, Gülnur AygünWell controlled Hf oxide patterns have been grown on a flat Hf thin film surface produced by the dc magnetron sputtering method on Si and SiOx substrates. These patterns have been created by using the technique of semi-contact scanning probe lithography (SC-SPL). The thickness and width of the oxide patterns have been measured as a function of applied voltage, duration and relative humidity. There is a threshold voltage even at 87% humidity, due to insufficient energy required to start the oxide growth process for a measurable oxide protrusion. Electrical characterization was also performed via the I-V curves of Hf and HfOx structures, and the resistivity of HfO x was found to be 4.284 × 109 Ω cm. In addition to the I-V curves, electric force microscopy and spreading surface resistance images of Hf and HfOx were obtained.