Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 9Development of Plant-Based Biopolymer Coatings for 3d Cell Culture: Boron-Silica Quince Seed Mucilage Nanocomposites(Royal Society of Chemistry, 2023) Yılmaz, Hilal Deniz; Cengiz, Uğur; Derkuş, Burak; Arslan, Yavuz Emre; 01. Izmir Institute of TechnologySpheroid formation with spontaneous aggregation has captured interest in most cell culture studies due to its easy set-up and more reliable results. However, the economic and technical costs of the advanced systems and commercial ultra-low adhesive platforms have pushed researchers into pursuing alternatives. Nowadays, polymeric coatings, including poly-hydroxyethyl methacrylate and agar/agarose, are the commonly used polymers for non-adhesive plate fabrication, yet the costs and working solvent or heat-dependent preparation procedures maintain the need for the development of novel biomaterials. Here, we propose a greener and more economical approach for producing non-adherent surfaces and spheroid formation. For this, a plant waste-based biopolymer from quince fruit (Cydonia oblonga Miller, from Rosaceae family) seeds and boron-silica precursors were introduced. The unique water-holding capacity of quince seed mucilage (Q) was enriched with silanol and borate groups to form bioactive and hydrophilic nanocomposite overlays for spheroid studies. Moreover, 3D gel plates from the nanocomposite material were fabricated and tested in vitro as a proof-of-concept. The surface properties of coatings and the biochemical and mechanical properties of the nanocomposite materials were evaluated in-depth with techniques, and extra hydrophilic coatings were obtained. Three different cell lines were cultured on these nanocomposite surfaces, and spheroid formation with increased cellular viability was recorded on day 3 with a >200 & mu;m spheroid size. Overall, Q-based nanocomposites are believed to be a fantastic alternative for non-adherent surface fabrication due to their low-cost, easy operation, and intrinsic hydration layer forming capacity with biocompatible nature in vitro.Article Citation - WoS: 16Citation - Scopus: 18Polyglycolide-Montmorillonite as a Novel Nanocomposite Platform for Biosensing Applications(Royal Society of Chemistry, 2017) Ünal, Betül; Yalçınkaya, Esra Evrim; Gümüştaş, Sıla; Sönmez, Burak; Özkan, Melek; Balcan, Mehmet; Odacı Demirkol, Dilek; Timur, Suna; 01. Izmir Institute of TechnologyIn catalytic biosensors, the immobilization of biomolecules in a suitable matrix is one of the vital parameters for obtaining improved systems. Clays, which are intercalated with various organic compounds, have a great tendency to develop biosensors with high stability, sensitivity and reproducibility. Herein, a polymer/clay nanocomposite based on natural silicate montmorilonite (Mt) and a biodegradable polymer polyglycolide (PGA) was prepared and characterized by FT-IR, thermogravimetric analysis, differential thermogravimetric analysis and X-ray diffraction. Then, the resulting matrix was used as a fixation matrix for pyranose oxidase (POx), which was selected as a model enzyme. The bioactive layer was fabricated by immobilization of POx on glassy carbon electrodes by means of PGA-Mt and bovine serum albumin. The POx biosensor revealed a good linear range from 0.01 to 0.5 mM glucose with a LOD of 1.2 μM. After the optimization of the working and preparation conditions, characterization studies were performed for glucose detection. Finally, the PGA-Mt/POx biosensor was confirmed to have detected glucose in beverages without needing any sample pre-treatment.Article Citation - WoS: 33Citation - Scopus: 33Folic Acid Modified Clay/Polymer Nanocomposites for Selective Cell Adhesion(Royal Society of Chemistry, 2014) Barlas, Fırat Barış; Ağ Şeleci, Didem; Özçelik, Serdar; Demir, Bilal; Şeleci, Muharrem; Aydın, Muhammed; Taşdelen, M. A.; Zareie, Hadi M.; Timur, Suna; Özçelik, Serdar; Yağcı, Yusuf; 04.01. Department of Chemistry; 04. Faculty of Science; 01. Izmir Institute of TechnologyA folic acid (FA) modified poly(epsilon-caprolactone)/clay nanocomposite (PCL/MMT-(CH2CH2OH)2-FA) resulting in selective cell adhesion and proliferation was synthesized and characterized as a cell culture and biosensing platform. For this purpose, first the FA modified clay (MMT-(CH2CH2OH)2-FA) was prepared by treating the organo-modified clay, Cloisite 30B [MMT-(CH2CH 2OH)2] with FA in chloroform at 60°C. Subsequent ring opening polymerization of ε-caprolactone in the presence of tin octoate (Sn(Oct)2) using MMT-(CH2CH2OH)2-FA at 110°C resulted in the formation of MMT-(CH2CH 2OH)2-FA with an exfoliated clay structure. The structures of intermediates and the final nanocomposite were investigated in detail by FT-IR spectral analysis and DSC, TGA, XRD, SEM and AFM measurements. The combination of FA, PCL and clay provides a simple and versatile route to surfaces that allows controlled and selective cell adhesion and proliferation. FA receptor-positive HeLa and negative A549 cells were used to prove the selectivity of the modified surfaces. Both microscopy and electrochemical sensing techniques were applied to show the differences in cell adherence on the modified and pristine clay platforms. This approach is expected to be adapted into various bio-applications such as 'cell culture on chip', biosensors and design of tools for targeted diagnosis or therapy.Article Citation - WoS: 12Citation - Scopus: 14Anomalous Transmittance of Polystyrene-Ceria Nanocomposites at High Particle Loadings†(Royal Society of Chemistry, 2013) Parlak, Onur; Demir, Mustafa Muammer; Demir, Mustafa Muammer; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyOptical nanocomposites based on transparent polymers and nanosized pigment particles have usually been produced at low particle concentrations due to the undesirable optical scattering of the pigment particles. However, the contribution of the particles to many physical properties is realized at high concentrations. In this study, nanocomposites were prepared with transparent polystyrene (PS) and organophilic CeO2 nanoparticles using various compositions in which the particle content was up to 95 wt%. The particles, capped by 3-methacryloxypropyltrimethoxysilane (MPS), were dispersed into PS and the transmittance of the spin-coated composite films was examined over the UV-visible region. When the particle concentration was <20 wt%, the transmittance of the films showed a first-order exponential decay as the Rayleigh scattering theory proposes. However, a positive deviation was observed from the decay function for higher particle contents. The improvement in transmittance may be a consequence of interference in the multiple scattering of light by the quasi-ordered internal microstructure that gradually develops as the particle concentration increases.