Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
15 results
Search Results
Article Regression Analysis of Material Properties and Hardness of Dense Boron Carbide(Wiley, 2025) Toksoy, M. Fatih; Haber, Richard A.Material properties directly affect the final performance of the produced articles. This study aims to establish a correlation between materials properties and hardness of boron carbide samples. Ten different boron carbide powders were sintered to high densities by spark plasma sintering, and material properties (grain size, density, stoichiometry, and free carbon) were analyzed. Hardness tests were conducted on these samples. All experimental procedures were completed by a single operator, and the same instruments were used for all the samples. Multiple linear regressions using the ordinary least squares method in SPSS were carried out to identify the relationship between hardness and material properties. Analyses showed density is the most dominant property, surpassing any other parameter. Grain size became more dominant at higher densities (>99%) and affected hardness results. Both grain size and density are the result of the starting powder and the densification procedure. This study showed that 80% of the hardness variation can be explained by this model.Article Citation - WoS: 6Citation - Scopus: 6Evaluation of the Extracts of Purple Basil (<i>ocimum Basilicum</I> L.) as Natural Ph-Indicator Dyes Anticipated To Be Utilised in Intelligent Food Packaging-An Optimisation Study(Wiley, 2024) Erez, Elif; Bayramoğlu, Beste; Bayramoglu, BestePurple basil (Ocimum basilicum L.) extract has significant potential as a natural colorimetric pH-indicator material owing to its abundance in anthocyanins. This contribution is the first to optimise the ultrasound-assisted extraction of purple basil by response surface methodology in terms of maximum total monomeric anthocyanin (TMA) content and pH-dependent increase in green intensity (IGI) using a three-level, three-factor Box-Behnken design. The latter was considered as a measure of the pH-indicator ability of the extracts. The independent variables were ethanol concentration, solvent/solid ratio, and extraction time for two types of solvents [aqueous ethanol with 0.1% (v/v) acetic acid (Ac) or hydrochloric acid]. Optimum conditions were determined for single and combined responses. The extracts were further characterised according to total phenolic content (TPC), percentage polymeric colour (PPC), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS) antioxidant, and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities. All models explained more than 93% of the variability. The combined response model for the Ac-acidified system gave more favourable optimal conditions [55.25% (v/v) ethanol, 30 mL/g solvent/solid ratio and 39.24 min] regarding lower ethanol consumption and shorter times. Validation experiments verified the model successfully predicted the responses. The corresponding TMA, IGI, PPC, TPC, ABTS, and DPPH values were determined as 4.83 +/- 0.18 mg cyanidin-3-glucoside equivalent, 2.29 +/- 0.05, 68.07 +/- 3.17, 28.79 +/- 1.54 mg gallic acid equivalent, 55.85 +/- 1.71 mg Trolox equivalent, and 16.80 +/- 1.08 mg ascorbic acid equivalent per gram dry weight, respectively.Article Citation - WoS: 3Citation - Scopus: 3Synthesis, Cytotoxicity, and Antibacterial Studies of 2,4,5,6-Substituted Hexahydro-1h(Wiley, 2023) Yetişkin, Egehan; Gündoğdu, Özlem; Mete, Derya; Celebioglu, Neslihan; Kara, Yunus; Şanlı-Mohamed, GulsahIn this study, synthesis of novel isoindole-1,3-dione analogues bearig halo, hydroxy, and acetoxy groups at the position 4,5,6 of the bicyclic imide ring was performed to examine their potential anticancer effects against some cell lines. A multistep chemical pathway was used to synthesize the derivatives. The cytotoxic effect of trisubstituted isoindole derivatives were evaluated by determining cellular viability using the MTT assay against A549, PC-3, HeLa, Caco-2, and MCF-7 cell lines. The C-2 selective ring-opening products were obtained from the ring-opening reaction of 5-alkyl/aryl-2-hydroxyhexahydro-4H-oxireno[2,3-e]isoindole-4,6(5H)-diones with nucleophiles such as chloride (Cl-) and bromide (Br-) ions. In addition, the ring-opening products halodiols were converted to their related acetates. The anticancer activity of synthesized isoindole-1,3-dione derivatives was investigated against HeLa, A549, MCF-7, PC3, and Caco-2 cells in vitro and resulted in varies cytotoxic effect depend on the group attached to the isoindole molecule. Furthermore, the evaluation of the antimicrobial action of trisubstituted isoindole derivatives against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria was assessed and found out selective inhibition of the both bacterial growth via different trisubstituted isoindole derivatives. The results of this work encourage further research on the potential utilization of trisubstituted isoindole derivatives as cytotoxic and antimicrobial agents.Article Product Design in Monopolistic Competition(Wiley, 2022) Dindaroğlu, BurakWe consider a model of monopolistic competition where producers can manipulate an elasticity parameter at an early stage. We interpret this as a choice of product specialization. Lower marginal costs of production lead to more generic products in all equilibria, which lead to fewer varieties under free-entry. Entry of a new firm increases overall specialization and increases prices, that is, the environment exhibits price-increasing competition. The loss of consumer surplus due to higher prices and lower consumption is compensated by the value of additional variety, hence entry also increases consumer surplus. Therefore, price-increasing competition need not be anticompetitive under endogenous specialization.Article Citation - WoS: 11Citation - Scopus: 12Treatment of Sugar Industry Wastewater by Using Subcritical Water as a Reaction Media(Wiley, 2023) Orak, Ceren; Öcal, Bulutcem; Yüksel, AslıThe sugar industry is one of the most wastewater-producing industries and it contains high content of organic and inorganic substances. Treating and reusing wastewater has significant importance because sugar industry needs to use a high volume of water. In this study, sugar industry wastewater was treated under subcritical conditions and the impacts of reaction temperature and duration over TOC removal percentage were investigated. Additionally, the impact of NaOH concentration over TOC removal percentage was examined. The highest TOC removal was obtained almost 95 % in the presence of 0.1 M of NaOH at 240 degrees C for 90 min of reaction duration. Treatment of sugar industry wastewater by subcritical water oxidation followed the second-order reaction kinetic model and the activation energy was found as 11.41 kJ/mol. Furthermore, the intermediate products were identified via GC-MS.Article Citation - WoS: 1Citation - Scopus: 1Influence of Processing Method of Cocrmo Dental Alloy on the Corrosion Behavior in Artificial Saliva(Wiley, 2022) Pontes, Joana R.; Pinto, Ana M. P.; Ariza, Edith; Alves, Alexandra C.; Toptan, FatihRemovable or fixed dental frameworks are usually made of CoCr alloys. The CoCr dental alloys are produced traditionally by lost-wax casting. However, alternative processing routes, such as hot-pressing, are being studied for dental applications. The purpose of the present work was to assess the corrosion resistance of CoCrMo dental alloy produced by conventional lost-wax casting and hot-pressing. The corrosion behavior was studied in artificial saliva at 37°C by potentiodynamic polarisation tests. Immersion tests were performed to evaluate the growth of the passive film where electrochemical impedance spectroscopy was used at different immersion periods. Results showed slightly better corrosion resistance in terms of ipass for CoCrMo samples obtained by hot-pressing. On the other hand, the immersion tests showed a more stable and thicker passive film formed on hot-pressed CoCrMo dental alloy, pointing out that hot-pressing may be considered a promising technique to produce CoCrMo dental structures.Article Citation - WoS: 1Citation - Scopus: 2Preparation and Photocatalytic Performances of Zno Nanostructures: Effects of Anodization Voltage and Time(Wiley, 2022) Öksüz, Ahmet Emrecan; Yurddaşkal, Metin; Doluel, Eyyup Can; Kartal, Uğur; Dikici, TuncayIn this study, ZnO nanostructures with different morphologies were produced by varying anodizing parameters (time and voltage), and the photocatalytic activities of these structures were examined. ZnO nanostructures were fabricated through different voltage and duration consisting of nine samples with KHCO3 solution as an electrolyte. The produced ZnO nanostructures were investigated by using X-ray diffraction (XRD), scanning electron microscopy, X-ray photoelectron spectroscopy, and UV–vis spectrophotometer. It was found that the morphology of ZnO was formed as nanosponge, nanoflower, nanowire, heterogeneous structures. ZnO nanostructures were identified by matching XRD peaks due to the ICDD database. Experiments on photocatalytic degradation of methylene blue demonstrated the photocatalytic activity of ZnO samples. The best photocatalytic performance of the samples was observed by S1 sample, which was anodized for 30 min in 0.05 M of KHCO3 electrolyte at 20 V, after 420 min exposure of the UV–vis light source with the degradation rate of 87.3%. Such ZnO nanostructures exhibit unique properties and have high potential for wastewater treatment.Article Citation - WoS: 3Citation - Scopus: 3Structural and Functional Analyses of Gh51 Alpha-L of Geobacillus Vulcani Gs90 Reveal Crucial Residues for Catalytic Activity and Thermostability(Wiley, 2022) Sürmeli, Yusuf; Şanlı Mohamed, GülşahAlpha-L-arabinofuranosidase (Abf) is of big interest in various industrial areas. Directed evolution is a powerful strategy to identify significant residues underlying Abf properties. Here, six active variants from GH51 Abf of Geobacillus vulcani GS90 (GvAbf) by directed evolution were overproduced, extracted, and analyzed at biochemical and structural levels. According to the activity and thermostability results, the most-active and the least-active variants were found as GvAbf51 and GvAbf52, respectively. GvAbf63 variant was more active than parent GvAbf by 20% and less active than GvAbf51. Also, the highest thermostability belonged to GvAbf52 with 80% residual activity after 1 h. Comparative sequence and structure analyses revealed that GvAbf51 possessed L307S displacement. Thus, this study suggested that L307 residue may be critical for GvAbf activity. GvAbf63 had H30D, Q90H, and L307S displacements, and H30 was covalently bound to E29 catalytic residue. Thus, H30D may decrease the positive effect of L307S on GvAbf63 activity, preventing E29 action. Besides, GvAbf52 possessed S215N, L307S, H473P, and G476C substitutions and S215 was close to E175 (acid–base residue). S215N may partially disrupt E175 action. Overall effect of all substitutions in GvAbf52 may result in the formation of the C–C bond between C171 and C213 by becoming closer to each other.Article Citation - WoS: 2Citation - Scopus: 1Effects of Electrospraying Parameters on Deposition of La0.3sr0.7fe0.7cr0.3o3−δ Cathode Layer on Gdc(Wiley, 2022) Akkurt, Sedat; Sındıraç, Can; Özmen Egesoy, Tuğçe; Atıcı, Gökçe; Erişman, Elif; Erğen, Emre; Büyükaksoy, AligülHigh performance in intermediate temperature solid oxide fuel cells requires improvements especially in the microstructure of the cathode layer. New cobalt-free cathode materials are used because cobalt-containing cathodes have higher thermal expansion coefficients, poor long-term chemical stability, and lower mechanical stability. Recently cobalt-free cathodes have been proposed to solve these issues by using deposition methods other than electrospray deposition (ESD). In this study, ESD method is used to develop a cobalt-free cathode layer. The electrolyte layer is gadolinium-doped ceria that is deposited with La0.3Sr0.7Fe0.7 Cr0.3O3−δ (LSFCr) prepared by 2-butoxyethanol and ethylene glycol solvents as opposed to conventional solvents. Experimental ESD parameters are tested at different levels and combinations by applying statistical experimental design methods to optimize the microstructure. Coating deposited as such demonstrated higher electrochemical performance than similar electrodes fabricated by other methods.Article Citation - WoS: 2Citation - Scopus: 2Assessing Edible Composite Film Polymer From Potato Industry Effluent Under High Hydrostatic Pressure and Its Antimicrobial Properties(Wiley, 2022) Akdemir Evrendilek, Gülsün; Bulut, Nurullah; Uzuner, SibelDevelopment of edible film from potato industry effluent having antimicrobial properties against Salmonella enteritidis and Escherichia coli O157:H7 by addition of Citrus sinensis volatile oil (VO), and changes of its textural properties under high hydrostatic pressure (HHP) are investigated. The optimum operational conditions are determined as 500 MPa pressure, 36.97 µL VO, and 15 min processing time with the minimum force value of 372.33 × g. Textural properties are also modeled through empirical modeling, best fit Box-Behnken design, and artificial neuron network. Inhibition zones for Salmonella enteritidis and E. coli O157:H7 at the optimum HHP conditions are 1.50 ± 0.11 and 2.18 ± 0.07 cm, respectively. Textural properties of force and elongation at break of the HHP-processed films range from 2.27 ± 0.52 to 5.23 ± 0.38 N, and from 8.57 ± 1.31 to 13.36 ± 1.36 mm, respectively. Thermal transition of the edible film is observed at 87.42 °C for 7.36 min. Addition of C. sinensis VO improves the antimicrobial properties, whereas HHP improves the textural properties of the film. It is suggested that the developed film has potential to be used as an edible food packaging material.