Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 5Hydrokinetic Power Potential Assessment of the Çoruh River Basin(Elsevier, 2024) Karakaya, Derya; Ozturk, Bahadir; Elci, SebnemHydrokinetic power contributes to energy security by a sustainable and predictable power source, and its decentralized nature fosters economic development in local communities. Unlike large-scale hydropower projects, hydrokinetic power has lower environmental impacts, promoting technological innovation and supporting the transition to cleaner energy systems. Furthermore, it pledges to guarantee electricity in isolated regions where traditional power systems are not suited, enhancing energy accessibility. This study presents a method that combines the Soil and Water Assessment Tool (SWAT) with the Hydrologic Engineering Center's River Analysis System (HEC-RAS) to forecast the hydrokinetic power capacity of a basin. The research site chosen is the & Ccedil;oruh River, a transboundary river basin with unavailable publicly accessible flow data. This method approximates the flow data utilizing the SWAT model, which relies on hydrological factors. Following the prediction of the flow data in the basin, the HECRAS model simulates the river's hydraulic conditions to estimate hydrokinetic energy potential. This integrated methodology provides a framework for optimizing hydrokinetic resources in diverse settings, guiding resource management, and sustainable energy planning. This study calculated theoretical hydrokinetic energy potential by considering flow velocity values. Results of the study indicated that the average flow velocity in the & Ccedil;oruh basin reaches its maximum value of 0.99 m/s in spring and its minimum value of 0.69 m/s in summer, respectively. Based on the seasonal analysis of the integrated approach, the highest maximum theoretical hydrokinetic power density in the basin reaches 26 kW/m2 during the spring and in subbasins 5, 7, and 8. The average theoretical hydrokinetic power density is calculated as 0.28 kW/m2. Finally, the study presents several potential locations along the & Ccedil;oruh River through GIS mapping, where small-scale hydrokinetic turbines could be installed as a viable option.Article Citation - WoS: 2Citation - Scopus: 3Air Density Calculation at High Altitude Locations for Wind Energy Use: the Alpines Validation(Taylor & Francis, 2023) Bingöl, FerhatAtmospheric air density has an essential role in the energy production of wind turbines. It is directly proportional to the power taken out from the airflow. The common practice at a planned wind farm location is to measure atmospheric parameters and calculate the air density as monthly and yearly averages based on the International Committee for Weights and Measures (CIPM). After that, the reference point is used to calibrate spatial data to study the siting of wind turbines at a large spatial domain of interest using an engineering method based on only temperature and elevation a.m.s.l. The engineering method is also employed with only temperature and elevation data when there are no pressure and relative humidity measurements. The point-to-spatial transformation is done through the simplified engineering formula, and it is known that the method is primarily valid up to (Formula presented.) a.m.s.l. Above these elevations, the engineering methods have a significant bias, up to (Formula presented.) error in estimating the air density. This bias leads to a substantial error in energy yield estimations. This study uses more than one in-situ measurement at high altitude locations to calibrate the engineering method at the Alpine Convention Perimeter. It aims to improve the calculation accuracy by calculating the pressure gradient within the region. It is found that the seasonal and yearly averaging errors can be improved by (Formula presented.) to (Formula presented.) in the air density calculation with the new approach. The method can be applied to other locations with similar conditions.Article Citation - WoS: 77Citation - Scopus: 95Sustainable Use of Apple Pomace (ap) in Different Industrial Sectors(MDPI, 2022) Gołębiewska, Ewelina; Kalinowska, Monika; Yıldız, GürayIn many countries, apple pomace (AP) is one of the most produced types of agri-food waste (globally, it is produced at a rate of ~4 million tons/year). If not managed properly, such bio-organic waste can cause serious pollution of the natural environment and public health hazards, mainly due to the risk of microbial contamination. This review shows that AP can be successfully reused in different industrial sectors—for example, as a source of energy and bio-materials—according to the idea of sustainable development. The recovered active compounds from AP can be applied as preservatives, antioxidants, anti-corrosion agents, wood protectors or biopolymers. Raw or processed forms of AP can also be considered as feedstocks for various bioenergy applications such as the production of intermediate bioenergy carriers (e.g., biogas and pyrolysis oil), and materials (e.g., biochar and activated carbon). In the future, AP and its active ingredients can be of great use due to their non-toxicity, biodegradability and biocompatibility. Given the increasing mass of produced AP, the commercial applications of AP could have a huge economic impact in the future.Article Citation - WoS: 4Citation - Scopus: 12Carbon Dioxide Emissions Mitigation Strategy Through Enhanced Geothermal Systems: Western Anatolia, Turkey(Springer, 2022) Chandrasekharam, Dornadula; Baba, AlperAlthough Turkey is not the biggest GHG polluter, its emissions have increased by 110.4% since 1990. Currently, its CO2 emissions alone have crossed 400 Mt. Within the scope of 2 °C targets (2D scenario), the country can easily surpass this target test by increasing its renewable energy sources as a primary energy source mix, by developing its Enhanced Geothermal Sources (EGS) locked up in the radiogenic granites of western Anatolia. The radiogenic heat generated by these granites, spread over an area of 4221 sq. km, varies from 5.3 to 16.34 µW/m3. Based on the electricity generation capacity of granites from Soultz-sous-Forets and Cooper Basin EGS sites, the combined electricity generation capacity of Kestanbol and Kozak granite plutons is about 830 billion kWh. For the period extending from 2019 to 2023, Turkey is aiming at reducing the usage of gas for electricity generation from 29.9 to 20.7%, increasing the share of renewable energy sources from 32.5 to 38.8%, increasing the electricity production from local energy sources from 150 to 219 TWh and increasing the electricity usage per-capita from 3.7 to 4.3 MWh. These energy targets can be achieved by major contributions from hydrothermal and EGS energy sources. This review demonstrates that besides electricity and heat, EGS energy can be utilized, together with other renewable energy sources, such as hydrothermal, wind, and concentrated solar for providing fresh water through the desalination process. These energy sources would provide food, energy, and water security to the country for several decades.