Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Citation - WoS: 25Citation - Scopus: 30Fabrication of 3d Printed Poly(lactic Acid) Strut and Wet-Electrospun Cellulose Nano Fiber Reinforced Chitosan-Collagen Hydrogel Composite Scaffolds for Meniscus Tissue Engineering(SAGE Publications, 2022) Güneş, Oylum Çolpankan; Kara, Aylin; Baysan, Gizem; Hüsemoğlu, Reşit Buğra; Akokay, Pınar; Ziylan Albayrak, Aylin; Ergür, Bekir Uğur; Havitçioğlu, HasanThe main goal of the study was to produce chitosan-collagen hydrogel composite scaffolds consisting of 3D printed poly(lactic acid) (PLA) strut and nanofibrous cellulose for meniscus cartilage tissue engineering. For this purpose, first PLA strut containing microchannels was incorporated into cellulose nanofibers and then they were embedded into chitosan-collagen matrix to obtain micro- and nano-sized topographical features for better cellular activities as well as mechanical properties. All the hydrogel composite scaffolds produced by using three different concentrations of genipin (0.1, 0.3, and 0.5%) had an interconnected microporous structure with a swelling ratio of about 400% and water content values between 77 and 83% which is similar to native cartilage extracellular matrix. The compressive strength of all the hydrogel composite scaffolds was found to be similar (∼32 kPa) and suitable for cartilage tissue engineering applications. Besides, the hydrogel composite scaffold comprising 0.3% (w/v) genipin had the highest tan δ value (0.044) at a frequency of 1 Hz which is around the walking frequency of a person. According to the in vitro analysis, this hydrogel composite scaffold did not show any cytotoxic effect on the rabbit mesenchymal stem cells and enabled cells to attach, proliferate and also migrate through the inner area of the scaffold. In conclusion, the produced hydrogel composite scaffold holds great promise for meniscus tissue engineering.Article Citation - WoS: 1Citation - Scopus: 1Fabrication and in Vitro Evaluation of Thermally Cross-Linked Gelatin Nanofibers for Drug Delivery Applications(Taylor & Francis, 2022) Mete, Derya; Göktaş, Gözde; Şanlı Mohamed, GülşahIn this study, four different nanofibers consisting of gelatin (Gel), doxorubicin (DOX) with gel (DOX@Gel), a composite of gel with poly(ethylene glycol) (PEGylated-gel), and DOX@PEGylated-gel were fabricated. Subsequently, the nanofibers were thermally cross-linked in order to offer a stable and biocompatible alternative for the biological applications of nanofibers such as drug delivery and tissue engineering. Nanofibers were characterized by scanning electron microscopy, Fourier Transform-Infrared Spectroscopy (FT-IR), and confocal microscopy. The formation of smooth, continuous, and uniform nanofibers was observed and the addition of PEG resulted in an increase whereas the incorporation of DOX into nanofibers had no significant change in the diameter of nanofibers. Crosslinking also enlarged the diameter of all nanofibers and the most dramatic increase was observed 53% by DOX@PEGylated-gel. Afterward, the biological performance of the nanofibers was investigated by drug release profile, cytotoxicity on A549 cell line as well as antimicrobial activity with E. coli and S. aureus. The results indicate an enhanced drug release profile, moderate antimicrobial activity, and reasonable cytotoxic efficiency for thermally cross-linked nanofibers compared to uncross-linked nanofibers.Article Citation - WoS: 11Citation - Scopus: 13Effect of Cnt Incorporation on Pan/Ppy Nanofibers Synthesized by Electrospinning Method(TÜBİTAK, 2020) İnce Yardımcı, Atike; Tanoğlu, Metin; Yılmaz, Selahattin; Selamet, YusufIn this study, carbon nanotubes (CNTs) added polyacrylonitrile/polypyrrole (PAN/PPy) electrospun nanofibers were produced. Average diameters of the nanofibers were measured as 268 and 153 nm for 10 and 25 wt% of PPy contents, respectively. A relatively higher strain to failure values (23.3%) were observed for the low PPy content. When as-grown CNTs (1 and 4 wt%) were added into the PAN/PPy blends, disordered nanofibers were observed to form within the microstructure. To improve the interfacial properties of CNTs/PAN/PPy composites, CNTs were functionalized with H2SO4/HNO3/HCl solution. The functionalized CNTs were well dispersed within the nanofibers and aligned along the direction of nanofibers. Therefore, beads formation on nanofibers decreased. The impedance of the nanofibers was found to decrease with the PPy content and CNT addition. These nanofibers had a great potential to be used as an electrochemical actuator or a tissue engineering scaffold.Article Citation - WoS: 8Citation - Scopus: 13Anticorrosion Coating for Magnesium Alloys: Electrospun Superhydrophobic Polystyrene/Sio2 Composite Fibers(TUBITAK, 2018) Horzum Polat, Nesrin; Kap, Özlem; Farzaneh, AmirSuperhydrophobic nanocomposite coatings for magnesium surfaces with remarkable corrosion resistance were fabricated by electrospinning in the presence of fluorosilane-functionalized silica (SiO2) nanoparticles. The effects of surface-modified silica (mod-SiO2) nanoparticles on the superhydrophobicity and corrosion resistance of polystyrene (PS)/mod-SiO2 fiber coatings were evaluated. The incorporation of the SiO2 nanoparticles endows PS fibers with rough surfaces exhibiting a water contact angle (WCA) of 165◦. The surface wettability, corrosion resistance, and their relation to the inorganic content in the PS fibers and the contact angle of the composite coatings were explored. Analysis of the corrosion results confirmed that the PS/mod-SiO2 coating protected the Mg surface from corrosion. In addition, PS fibers containing mod-SiO2 nanoparticles showed improved hydrophobicity, and excellent corrosion resistance was achieved with PS fibers containing 4 wt% SiO2 nanoparticles.Article Citation - WoS: 2Citation - Scopus: 4Use of Electrospun Fiber Mats for the Remediation of Hypersaline Geothermal Brine(Desalination Publications, 2017) Çelik, Aslı; Koç, Gonca; Erdoğan, Emre; Shahwan, Talal; Baba, Alper; Demir, Mustafa MuammerGeothermal brines display high contents of various metal ions that can adversely affect surface and groundwater resources. Nevertheless, it is possible to sequestrate these metals and use some of them in certain engineering applications. The aim of this study was to fabricate electrospun chitosan fiber mats and remove heavy metal cations from geothermal brine of the Tuzla geothermal field (TGF) by employing these mats. TGF is located on the Biga Peninsula in the northwestern part of Turkey. The brine of TGF has high salinity (EC > 91 mS/cm) and high temperature (reservoir temperature is 173°C). The brine is rich in terms of metal cations. For instance, the concentration of lithium ion in geothermal fluid ranges from 17 to 35 mg/L, with little seasonal variations. A horizontal electrospinning setup was employed to obtain a non-woven mat comprising submicron diameter chitosan fibers at 2.0 kV∙cm−1. This material was then utilized as a stable membrane for the removal of metal ions present in the brine through sorption at 25°C overnight. The results showed that the chitosan fiber mats sequestrate various ions in the brine. Under the studied conditions, the material was capable of removing 46%, 44%, 50%, 44%, 40%, 67% and 48% of Li+, Mg2+, Ba2+, Sr2+, Mn2+, Ca2+ and K+ from the geothermal brine, respectively.Article Citation - WoS: 4Citation - Scopus: 5Adsorption/Desorption and Biofunctional Properties of Oleuropein Loaded on Different Types of Silk Fibroin Matrices(The Society of Chemists and Techonogists of Macedonia, 2017) Bayraktar, Oğuz; Balta, Ali Bora; Başal Bayraktar, GüldemetThe objective of this study was to investigate the adsorption/desorption behavior of oleuropein on different types of silk fibroin matrices including silk fibroin microfibers (MF), regenerated silk fibroin (RSF), and silk fibroin nanofibers (NF). Nanofibers with an average diameter of ranging between 24 and 326 nm were successfully prepared using the electrospinning technique. The effects of the silk fibroin concentration, the voltage applied and the distance between needle tip and collector plate on the morphol-ogy of the NF were investigated. The adsorption capacities of MF, RSF and NF were determined as 104.92, 163.07 and 228.34 mg oleuropein per gram of material, respectively. The percentage of initially adsorbed oleuropein that was desorbed was 86.08, 91.29 and 96.67% for MF, RSF and NF, respectively. NF and RSF discs loaded with oleuropein were subjected to disc diffusion assays to determine their antibacterial activity against test microorganisms Staphylococcus epidermidis (Gram +) and Esche-richia coli (Gram -). The results showed that both biomaterials possessed antibacterial properties after loading with oleuropein. Wound scratch assays using oleuropein released from NF revealed an enhance-ment of cell migration, indicating a wound healing property of the material. In conclusion, the NF can be utilized as a biofunctional polymeric material with better perfor-mance for the adsorption and desorption of oleuropein compared with MF and RSF.