Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 27Citation - Scopus: 28Biocomposite Scaffolds for 3d Cell Culture: Propolis Enriched Polyvinyl Alcohol Nanofibers Favoring Cell Adhesion(John Wiley and Sons Inc., 2021) Bilginer, Rumeysa; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuThe objective of this work is generation of propolis/polyvinyl alcohol (PVA) scaffold by electrospinning for 3D cell culture. Here, PVA used as co-spinning agent since propolis alone cannot be easily processed by electrospinning methodology. Propolis takes charge in maximizing biological aspect of scaffold to facilitate cell attachment and proliferation. Morphological analysis showed size of the electrospun nanofibers varied between 172-523 nm and 345-687 nm in diameter, for non-crosslinked and crosslinked scaffolds, respectively. Incorporation of propolis resulted in desired surface properties of hybrid matrix, where hybrid scaffolds highly favored protein adsorption. To examine cell compatibility, NIH-3T3 and HeLa cells were seeded on propolis/PVA hybrid scaffold. Results confirmed that integration of propolis supported cell adhesion and cell proliferation. Also, results indicated electrospun propolis/PVA hybrid scaffold provide suitable microenvironment for cell culturing. Therefore, developed hybrid scaffold could be considered as potential candidate for 3D cell culture and tissue engineering.Article Citation - WoS: 23Citation - Scopus: 26The Effect of Biomimetic Coating and Cuttlebone Microparticle Reinforcement on the Osteoconductive Properties of Cellulose-Based Scaffolds(Elsevier, 2020) Palaveniene, Alisa; Songailiene, Kristina; Baniukaitiene, Odeta; Tamburacı, Sedef; Kimna, Ceren; Tıhmınlıoğlu, Funda; Liesiene, JolantaPolymer-based scaffolds have already gained popularity in many biomedical applications due to convenient routes for fabrication and favourable structural, physicochemical and functional characteristics. However, polymeric scaffolds lack osteoconductivity and some synthetic polymers carry the risk of inflammatory response caused by degradation by-products. Those facts limit their practical use in bone tissue engineering. In this study, three-dimensional (3D) porous scaffolds from naturally derived polymer, namely regenerated cellulose, were prepared using a non-hydrolytic sol-gel and lyophilization techniques. To induce osteoconductive properties of the polymeric scaffolds, cuttlebone microparticles were immobilized and the surface coating was achieved via in vitro mineralization using 10-fold concentrated simulated body fluid (10x SBF). Biogenic activity of cuttlebone is explained by its chemical composition, which includes polysaccharide beta-chitin and macro-, micro- and trace elements favourable for mineralization. Parallel the scaffolds were examined during long-term (24 weeks) in vitro mineralization in 1x SBF for the purpose to investigate apatite-forming ability of the scaffolds. A nice cauliflower-like structures and needle-like dents of the spherical aggregates, which are characteristic to hydroxyapatite precursors, were observed on the surface of cellulose/cuttlebone scaffolds by SEM. 10x SBF coating enhanced cell attachment to the scaffolds because SBF elements are known to increase bioactivity by inducing re-deposition of carbonate apatite crystallites on scaffold surface. Additionally, calcium and phosphate depositions were clearly observed on the developed scaffolds using von Kossa and Alizarin Red S staining. Proliferative and osteoconductive effects on the osteoblast-like MG-63 cells demonstrate the cellulose/cuttlebone scaffolds soaked in 10x SBF as a favourable material for bone tissue engineering. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 21Citation - Scopus: 16A Facile Method To Fabricate Propolis Enriched Biomimetic Pva Architectures by Co-Electrospinning(Elsevier Ltd., 2020) Bilginer, Rümeysa; Arslan Yıldız, AhuThis study depicts easy process of propolis by co-electrospinning without using any toxic agent for biomedical applications. To achieve this, polyvinyl alcohol was utilized as co-spinning agent to fabricate biomimetic Propolis/PVA scaffold. Here, whilst PVA was used as a supportive material to accumulate propolis in scaffold, propolis was employed to enrich biologic aspect of scaffold. This strategy overcomes challenges of propolis processing originated from solubility problems and offers easy processability of propolis in order to use in biomedical applications. Electrospun Propolis/PVA scaffolds were crosslinked with glutaraldehyde and drop-cast model was utilized as a control. Formation of porous, bead-free nanofiber architectures was confirmed through surface morphology analysis, while drop-cast model shows non-porous morphology. Wettability results confirmed both crosslinking and integration of propolis into polyvinyl alcohol scaffold moved contact angle to hydrophobic region. Presence and amount of propolis in hybrid scaffolds were validated via absorbance spectrum results. Bioactivity and biocompatibility of propolis-enriched scaffolds were analyzed through protein adsorption capacity. Obtained findings are evidence that electrospinning methodology offers easy and biosafe process of propolis. Electrospun Propolis/PVA exhibits desired properties and could be potentially utilized as scaffold for tissue engineering or as a wound dressing graft in biomedical field. © 2020 Elsevier B.V.Article Citation - WoS: 5Citation - Scopus: 6Determination of Force-Free Wet Adhesion of Mussel-Inspired Polymers To Spin Labeled Surface(Elsevier, 2017) Kırpat, İklima; Göksel, Yaman; Karakuş, Erman; Emrullahoğlu, Mustafa; Akdoğan, YaşarHydration repulsive forces oppose the adhesive interactions, especially in the force-free conditions. Here, we studied spontaneous wet adhesion of 3,4-dihydroxyphenylalanine (DOPA) functionalized poly(ethylene glycol) (PEG) polymers inspired by marine mussels. Using electron paramagnetic resonance (EPR) spectroscopy, we can monitor spontaneous adhesion of DOPA containing polymer to suspended spin labeled hydrophobic polystyrene nanobeads at molecular level. The surface coverage up to 82% is obtained from EPR measurements. However, in the force-free condition, EPR measurements do not show any detectable DOPA based adhesion to hydrophilic silica nanobead.