Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
15 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 3Atomic-Scale Insights Into Carbon Dioxide Hydrogenation Over Bimetallic Iron-Cobalt Catalysts: a Density Functional Theory Study(MDPI, 2023) Tuncer, Dilan; Kızılkaya, Ali CanThe conversion of carbon dioxide to fuels and chemicals is a promising long-term approach for mitigating CO2 emissions. Despite extensive experimental efforts, a fundamental understanding of the bimetallic catalytic structures that selectively produce the desired products is still lacking. Here, we report on a computational surface science approach into the effect of the Fe doping of Co(111) surfaces in relation to CO2 hydrogenation to C1 products. Our results indicate that Fe doping increases the binding strength of surface species but slightly decreases the overall catalytic activity due to an increase in the rate-limiting step of CO dissociation. FeCo(111) surfaces hinder hydrogenation reactions due to lower H coverages and higher activation energies. These effects are linked to the Lewis basic character of the Fe atoms in FeCo(111), leading to an increased charge on the adsorbates. The main effect of Fe doping is identified as the inhibition of oxygen removal from cobalt surfaces, which can be expected to lead to the formation of oxidic phases on bimetallic FeCo catalysts. Overall, our study provides comprehensive mechanistic insights related to the effect of Fe doping on the catalytic behavior and structural evolution of FeCo bimetallic catalysts, which can contribute to the rational design of bimetallic catalysts.Article Citation - WoS: 3Citation - Scopus: 3Stable Single Layer Structures of Aluminum Oxide: Vibrational and Electronic Characterization of Magnetic Phases(Elsevier, 2022) Özyurt, A. Kutay; Molavali, Deniz; Şahin, HasanThe structural, magnetic, vibrational and electronic properties of single layer aluminum oxide (AlO2) are investigated by performing state-of-the-art first-principles calculations. Total energy optimization and phonon calculations reveal that aluminum oxide forms a distorted octahedral structure (1T′-AlO2) in its single layer limit. It is also shown that surfaces of 1T′-AlO2 display magnetic behavior originating from the O atoms. While the ferromagnetic (FM) state is the most favorable magnetic order for 1T′-AlO2, transformation to a dynamically stable antiferromagnetic (AFM) state upon a slight distortion in the crystal structure is also possible. It is also shown that Raman activities (350–400 cm−1) obtained from the vibrational spectrum can be utilized to distinguish the possible magnetic phases of the crystal structure. Electronically, both FM and the AFM phases are semiconductors with an indirect band gap and they can form a type-III vdW heterojunction with graphene-like ultra-thin materials. Moreover, it is predicted that presence of oxygen defects that inevitably occur during synthesis and production do not alter the magnetic state, even at high vacancy density. Apparently, ultra-thin 1T′-AlO2 with its stable crystal structure, semiconducting nature and robust magnetic state is a quite promising material for nanoscale device applications.Article Citation - WoS: 11Citation - Scopus: 10Intercalation Leads To Inverse Layer Dependence of Friction on Chemically Doped Mos2(IOP Publishing, 2023) Açıkgöz, Oğulcan; Guerrero, Enrique; Yanılmaz, Alper; Dağdeviren, Ömür E.; Çelebi, Cem; Strubbe, David A.; Baykara, Mehmet Z.We present results of atomic-force-microscopy-based friction measurements on Re-doped molybdenum disulfide (MoS2). In stark contrast to the widespread observation of decreasing friction with increasing number of layers on two-dimensional (2D) materials, friction on Re-doped MoS2 exhibits an anomalous, i.e. inverse, dependence on the number of layers. Raman spectroscopy measurements combined with ab initio calculations reveal signatures of Re intercalation. Calculations suggest an increase in out-of-plane stiffness that inversely correlates with the number of layers as the physical mechanism behind this remarkable observation, revealing a distinctive regime of puckering for 2D materials.Article Citation - WoS: 17Citation - Scopus: 20Electrospun Polyacrylonitrile (pan) Nanofiber: Preparation, Experimental Characterization, Organic Vapor Sensing Ability and Theoretical Simulations of Binding Energies(Springer, 2022) İnce Yardımcı, Atike; Yağmurcukardeş, Nesli; Yağmurcukardeş, Mehmet; Çapan, İnci; Erdoğan, Matem; Çapan, Rıfat; Tarhan, Özgür; Açıkbaş, YaserIn this study, polyacrilonitrile (PAN) nanofibers obtained by electrospinning were directly coated on the surface of a quartz crystal microbalance (QCM) and were investigated for their sensing characteristics against chloroform, dichloromethane and carbon tetrachloride as volatile organic compounds (VOCs). PAN nanofibers were characterized by SEM, DSC, Raman Spectroscopy, and FT-IR and the results indicated that beadless and regular nanofibers with the average diameter of 182.7 ± 32 nm were obtained. Kinetic measurements indicated that electrospun PAN nanofibers were sensitive to the VOCs and they were appropriate for sensing applications of chlorine compounds. The reproducibility of PAN nanofiber sensor was also shown in this study. The results revealed that the diffusion coefficients of VOCs increased with the order carbontetrachloride < dichloromethane < chloroform which was supported by the density functional theory (DFT) simulations that revealed the highest binding energy for chloroform.Article Citation - WoS: 6Citation - Scopus: 9Mechanistic Insights Into the Effect of Sulfur on the Selectivity of Cobalt-Catalyzed Fischer–tropsch Synthesis: a Dft Study(MDPI, 2022) Dağa, Yağmur; Kızılkaya, Ali CanSulfur is a common poison for cobalt-catalyzed Fischer–Tropsch Synthesis (FTS). Alt-hough its effects on catalytic activity are well documented, its effects on selectivity are controversial. Here, we investigated the effects of sulfur-covered cobalt surfaces on the selectivity of FTS using density functional theory (DFT) calculations. Our results indicated that sulfur on the surface of Co(111) resulted in a significant decrease in the adsorption energies of CO, HCO and acetylene, while the binding of H and CH species were not significantly affected. These findings indicate that sulfur increased the surface H/CO coverage ratio while inhibiting the adsorption of carbon chains. The elementary reactions of H-assisted CO dissociation, carbon and oxygen hydrogenation and CH coupling were also investigated on both clean and sulfur-covered Co(111). The results indicated that sulfur decreased the activation barriers for carbon and oxygen hydrogenation, while increasing the barriers for CO dissociation and CH coupling. Combining the results on elementary reactions with the modification of adsorption energies, we concluded that the intrinsic effect of sulfur on the selectivity of cobalt-catalyzed FTS is to increase the selectivity to methane and saturated short-chain hy-drocarbons, while decreasing the selectivity to olefins and long-chain hydrocarbons.Article Citation - WoS: 21Citation - Scopus: 21Prediction of Monoclinic Single-Layer Janus Ga2tex (x = S and Se): Strong In-Plane Anisotropy(American Physical Society, 2021) Yağmurcukardeş, Mehmet; Moğulkoç, Yeşim; Akgenç, Berna; Moğulkoç Aybey; Peeters, François M.By using density functional theory (DFT) based first-principles calculations, electronic, vibrational, piezo-electric, and optical properties of monoclinic Janus single-layer Ga2TeX (X = S or Se) are investigated. The dynamical, mechanical, and thermal stability of the proposed Janus single layers are verified by means of phonon bands, stiffness tensor, and quantum molecular dynamics simulations. The calculated vibrational spectrum reveals the either pure or coupled optical phonon branches arising from Ga-Te and Ga-X atoms. In addition to the in-plane anisotropy, single-layer Janus Ga2TeX exhibits additional out-of-plane asymmetry, which leads to important consequences for its electronic and optical properties. Electronic band dispersions indicate the direct band-gap semiconducting nature of the constructed Janus structures with energy band gaps falling into visible spectrum. Moreover, while orientation-dependent linear-elastic properties of Janus single layers indicate their strong anisotropy, the calculated in-plane stiffness values reveal the ultrasoft nature of the structures. In addition, predicted piezoelectric coefficients show that while there is a strong in-plane anisotropy between piezoelectric constants along armchair (AC) and zigzag (ZZ) directions, there exists a tiny polarization along the out-of-plane direction as a result of the formation of Janus structure. The optical response to electromagnetic radiation has been also analyzed through density functional theory by considering the independent-particle approximation. Finally, the optical spectra of Janus Ga2TeX structures is investigated and it showed a shift from the ultraviolet region to the visible region. The fact that the spectrum is between these regions will allow it to be used in solar energy and many nanoelectronics applications. The predicted monoclinic single-layer Janus Ga2TeX are relevant for promising applications in optoelectronics, optical dichroism, and anisotropic nanoelasticity.Article Citation - WoS: 5Citation - Scopus: 6Tuning the Structural, Electronic and Dynamical Properties of Janus M4x3y3 (m = Pd, Ni and Co; X,y = S, Se and Te) Monolayers: a Dft Study(Royal Society of Chemistry, 2021) Eren, İsmail; Akgenç, BernaBased on density functional theory, the structural, electronic and vibrational properties of two-dimensional transition metal chalcogenides M2X3 and their Janus type M4X3Y3, where M = Pd, Co and Ni and X = Se, S and Te, are investigated. Motivated by the successful synthesis of a 2D Pd2Se3 monolayer and the proof of the dynamical stability of Ni2Se3 and Co2Se3 monolayers, in terms of the phonon band dispersions, we have systemically studied the fundamental physical properties of Janus transition metal chalcogenides, such as their structural, phonon and thermodynamic stability and their electronic and mechanical properties. Our results show that Janus structures of M4X3Y3 are energetically favorable and dynamically stable. The ab initio molecular dynamic simulations (AIMD) results clearly prove that they kept their thermal stability at room temperature. We have demonstrated their structural, electronic and vibrational properties and Raman spectra. The electronic band dispersions show that monolayer Co2Se3 shows half-metal properties with a moderate band gap (1.01 eV), Pd2Se3 has a 1.42 eV direct band gap, while Ni2Se3 has a 1.38 eV indirect band gap. Pd4Se3S3, Pd4Se3Te3 and Pd4S3Te3 are indirect band gap semiconductors with band gaps of 1.22 eV, 1.05 eV and 0.61 eV, respectively. Ni4Se3S3, Ni4Se3Te3 and Ni4S3Te3 are indirect band gap semiconductors with band gaps of 1.61 eV, 0.77 eV and 0.49 eV, respectively. While pristine Co2Se3 is shown to have half-metallicity (HM), the HM behaviour of the Janus Co4Se3Te3 and Co4S3Te3 monolayers disappear and Co4Se3S3 remains a HM with a moderate band gap of 0.85 eV. In addition, the Raman spectra of these Janus materials are shown to exhibit totally distinctive features as compared to those of the pristine materials. This work reveals the important material properties of Janus type M4X3Y3 monolayers, where M = Pd, Co and Ni and X = Se, S and Te, which could have wide applications in new functional devices.Article Citation - WoS: 13Citation - Scopus: 12Orthorhombic Cspbi3 Perovskites: Thickness-Dependent Structural, Optical and Vibrational Properties(Elsevier, 2020) Özen, Sercan; İyikanat, Fadıl; Özcan, Mehmet; Tekneci, Gülsüm Efsun; Eren, İsmail; Sözen, Yiğit; Şahin, HasanCesium lead halide perovskites have been subject to intense investigation, mostly because of their potential to be used in optoelectronic device applications. However, regarding the need for nanoscale materials in forthcoming nanotechnology applications, understanding of how the characteristic properties of these perovskite crystals are modified through dimensional crossover is essential. In this study, thickness-dependence of the structural, electronic and vibrational properties of orthorhombic CsPbI3, which is one of the most stable phase at room temperature, is investigated by means of state-of-the-art first-principles calculations. Our results show that (i) bilayers and monolayers of CsPbI3 can be stabilized in orthorhombic crystal symmetry, (ii) among; the possible ultra-thin perovskites only structures with CsI-terminated surface are dynamically stable (iii) electronic band gap increases with decrease in perovskite thickness due to quantum size effect and (iv) reflectivity and transmissivity of the orthorhombic CsPbI3 can be tuned by varying the thickness that modifies the electron confinement. (c) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 6Citation - Scopus: 6Few-Layer Mos2 as Nitrogen Protective Barrier(IOP Publishing Ltd., 2017) Akbalı, Barış; Yanılmaz, Alper; Tomak, Aysel; Tongay, Sefaattin; Çelebi, Cem; Şahin, HasanWe report experimental and theoretical investigations of the observed barrier behavior of few-layer MoS2 against nitrogenation. Owing to its low-strength shearing, low friction coefficient, and high lubricity, MoS2 exhibits the demeanor of a natural N-resistant coating material. Raman spectroscopy is done to determine the coating capability of MoS2 on graphene. Surface morphology of our MoS2/graphene heterostructure is characterized by using optical microscopy, scanning electron microscopy, and atomic force microscopy. In addition, density functional theory-based calculations are performed to understand the energy barrier performance of MoS2 against nitrogenation. The penetration of nitrogen atoms through a defect-free MoS2 layer is prevented by a very high vertical diffusion barrier, indicating that MoS2 can serve as a protective layer for the nitrogenation of graphene. Our experimental and theoretical results show that MoS2 material can be used both as an efficient nanocoating material and as a nanoscale mask for selective nitrogenation of graphene layer.Article Citation - WoS: 2Citation - Scopus: 2Atomic-scale understanding of dichlorobenzene-assisted poly 3-hexylthiophene-2,5-diyl nanowire formation mechanism(Elsevier Ltd., 2017) Yağmurcukardeş, Mehmet; Kıymaz, D.; Zafer, C.; Senger, Ramazan Tuğrul; Şahin, HasanLow-dimensional Poly 3-hexylthiophene-2,5-diyl (P3HT) structures that serve efficient exciton dissociation in organic solar cells, play a major role in increasing the charge collection, and hence, the efficiency of organic devices. In this study, we theoretically and experimentally investigate the Dichlorobenzene (DCB)-assisted formation of P3HT nanowires. Our experiments show that the solution of DCB molecules drive randomly oriented P3HT polymers to form well-stacked nanowires by stabilizing tail-tail and π−π interactions. Here the question is how DCB molecules migrate into the P3HT layers while forming the nanowire structure. Our density functional theory-based calculations reveal that the vertical migration of the DCB molecules between P3HT layers is forbidden due to a high energy barrier that stems from strong alkyl chain-DCB interaction. In contrast to vertical diffusion, lateral diffusion of DCB molecules in between P3HT layers is much more likely. Our results show that migration of a DCB molecule occurs through the alkyl groups with a low energy barrier. Therefore, laterally diffused DCB molecules assist nucleation of top-to-top stacking of P3HT polymers and formation of well-ordered nanowires.