Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Ten Questions Concerning Circularity in the Built Environment(Pergamon-Elsevier Science Ltd, 2026) Kayacetin, N. Cihan; Aslanoglu, Rengin; Piccardo, Chiara; Afacan, Yasemin; Masera, Gabriele; Li, Qiuxian; Van Hoof, JoostThe rapid urbanisation of our societies calls for an urban renewal movement, including developing new areas to accommodate housing facilities and services and regenerating existing urban areas. Yet, urban renewal projects pose trade-offs impacting both environmental and socio-economic aspects. The renovation and new construction of buildings can escalate the use of energy and material resources as well as increasing greenhouse gas emissions. The European Union plays a leading role in promoting the transition towards sustainable and inclusive cities, whereas other regions such as North America, Australia and Asia follow suit via Circular Economy Action Plans or Frameworks, highlighting the need to enhance resource efficiency in buildings through the use of durable and circular materials. Current research on resource efficiency in buildings follows the Circular Economy concept, which aims to reduce the use of raw materials and the waste of existing materials while retaining their value for as long as possible. However, the role of the circular economy in sustainable transition and the adoption of its principles in urban contexts remain unclear while its practical implementation still faces significant challenges, including the lack of analytical instruments and assessment methods as well as co-creative approaches. This 'Ten Questions contribution' provides an overview of the pressing issues concerning circularity in the built environment, the state-of-the-art and best practices, challenges and benefits, policies and regulations, as well as numerous strategies applied on the building and neighbourhood level, assessment methodologies and future trends.Article Citation - WoS: 15Citation - Scopus: 16Proposal of Novel Exergy-Based Sustainability Indices and Case Study for a Biomass Gasification Combine Cycle Integrated With Liquid Metal Magnetohydrodynamics(Elsevier, 2023) Canpolat Tosun, Demet; Açıkkalp, Emin; Çağlar, Başar; Altuntaş, Önder; Hepbaşlı, ArifExergy is considered a way to sustainability. Exergy-based analyses have been recently widely used for performance assessment and comparison purposes of energy systems from production to end-user while different sustainability related indices or indicators including exergetic concepts have been developed in the literature. In this regard, the present study proposed five different indices: (i) Exergetic Fuel Based Environmental Remediation Index (X), (ii) Exergetic Product Based Environmental Remediation Index (delta), (iii) Exergetic Fuel Based Total Environmental Remediation Index (beta), (iv) Exergetic Product Based Total Environmental Remediation Index (alpha), and (v) Improved Sustainability Index (ISI). These indices were applied to a novel Biomass-integrated Gasification Combine Cycle (BIGCC) integrated with Liquid Metal Magnetohydrodynamics (LMMHD). They allowed to perform a more complete environmental analysis by considering the exergetic cost of environmental remediation of the process. The average exergy efficiency values for the BIGCC, LMMHD and the overall system were determined as 0.491, 0.222 and 0.688 under daily ambient temperatures for a year and different air to fuel ratio (AFR) conditions, respectively. The average values for.X, beta, delta, alpha and ISI were 1.636, 2.389, 1.949, 2.848 and 0.513, respectively.Article Citation - Scopus: 40Determination of the Most Appropriate Site Selection of Wind Power Plants Based Geographic Information System and Multi-Criteria Decision-Making Approach in Develi, Turkey(Aalborg University Press, 2021) Karipoğlu, Fatih; Genç, Mustafa Serdar; Koca, KemalWind power has major benefits including providing for an increasing energy demand while tackling climate change problems. Detailed planning processes such as technical, social, environmental, various agents, and political concerns are essential for the development of wind energy projects. The objective of the present study is to develop a visualization that combines Geographic Information System (GIS) and Multi-Criteria Decision Making (MCDM) and implementation for Kayseri, Develi in Turkey as a case study. For the analyzes, CORINE CLC 2000 and other data sources were employed for data acquisition to unlock fragmented and hidden onshore data resources and to facilitate investment in sustainable coastal and inland activities. Several factors were determined in the wind power plant installations such as wind potential, roads, water sources, and these factors were analyzed based on their buffer zones. After detailed analyses, sites near the Havadan (7.87 MW) and Kulpak (9.22 MW) villages were found to be the most suitable locations for the installation of a potential onshore wind farm. The method suggested in this study can be used to analyze the suitability of any region at the regional level for onshore wind power plant and the results of the study can be used to develop based on public perception, renewable energy policies, energy political rules. © 2021, Aalborg University press. All rights reserved.Article Citation - WoS: 14Citation - Scopus: 2Climate Change Mitigation With Renewable Energy: Geothermal(Springer Verlag, 2011) Baba, AlperOn a global scale, there is increasing evidence that climate is changing and of a discernible human influence. Many of scientists are confident that if current emissions of greenhouse gases continue, the world will be warmer, sea levels will rise and regional climate patterns will change. According to some scientist, global temperatures are expected to rise faster over the next century than over any time during the last 10,000 years. From this token, geothermal energy is now considered to be one of the most important alternative energy sources to minimize climate change. Geothermal technologies for power generation or direct use operate with little or no greenhouse gas emissions. Geothermal energy is generally accepted as being an environmentally-friendly energy source, particularly when compared to fossil fuel energy sources. Geothermal resources have long been used for direct heat extraction for district urban heating, industrial processing, domestic water and space heating, leisure and balneotherapy applications. Geothermal energy is used in more than 80 countries for direct heat application and 24 countries for power generation. Re-injection of fluids maintains a constant pressure in the reservoir, thus increasing the field's life and reducing concerns about environmental impacts. Geothermal energy has several significant characteristics that make it suitable for climate change mitigation.Article Citation - Scopus: 19Application of Geothermal Energy and Its Environmental Problems in Turkey(Inderscience Enterprises Ltd., 2015) Baba, AlperHuman beings have been benefiting from geothermal energy for different uses since the dawn of the civilisation in many parts of the world. One of the earliest uses of geothermal energy was for heating and it was used extensively by Romans in Turkey. The Aegean region is favoured by a large number of thermal springs known since ancient times. However, it was first in the 20th century that geothermal energy was used on a large scale for direct use and electricity generation. The country's installed heat capacity is 2,705 MWt for direct use and 322.39 MWe for power production. In parallel to developing geothermal energy applications in Turkey, many sites are now experiencing problems such as water contamination associated with geothermal fluid. Especially, the high temperature solution of elements and compounds, causes operational limitations in geothermal power plants. These limitations are due to the severe scaling and corrosion of geothermal fluid. Copyright © 2015 Inderscience Enterprises Ltd.Conference Object Evaluation of an Integrated Gis-Based Crime Analysis & 3d Modelling for Izmir-Konak Municipality(International Society for Photogrammetry and Remote Sensing, 2011) Tarhan, Çiğdem; Deniz, DenizGIS integrated 3D modelling is crucial for the city planning and design processes because urban modelling is a tool used in virtual environments, and provides convenience to work. Although, the creation and display of 3D city models for large regions is difficult it is vital for planning and designing safer cities, as well as public places. Today, crime is a significant problem in Turkey. When it was compared by years of crime rates, population growth and urbanization rate, an increasing more than in parallel has been observed. This paper aims to discuss GIS integrated 3D modelling affects in urban planning and design, explaining Turkish planning processes with GIS and 3D modelling. To do that, it presents a case study for Izmir Konak Municipality about GIS integrated crime analysis and 3D models of the crime scenes. Izmir crime records has been obtained from Izmir Police Department belonging to 2003-2004 and 2005 (D.Deniz, 2007) are used for districts’ crime map. In the light of these data, the highest rate crime district, Konak, is analyzed between 2001 and 2005 data.