Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Comprehensive 4E Analysis, Multi-Objective Optimization, and Feasibility Study of Five Natural Gas Liquefaction Processes With a Case Study for Iran(Elsevier Sci Ltd, 2026) Basmenj, Farhad Rahmdel; Tabriz, Zahra Hajimohammadi; Aghdasinia, Hassan; Mohammadpourfard, MousaNatural gas (NG) is increasingly vital as a cleaner energy source due to its lower carbon emissions compared to other fossil fuels. Liquefaction facilitates efficient long-distance transportation. While numerous studies address NG liquefaction's technical aspects, holistic research remains limited. This study presents a comprehensive evaluation of five conventional natural gas (NG) liquefaction processes (including SMR-Linde, SMR-APCI, C3MRLinde, DMR-APCI, and MFC-Linde) through a 4E framework: energy, exergy, exergoeconomic, and exergoenvironmental analyses. Addressing limitations in prior research, it incorporates environmental considerations and introduces production volume-independent metrics to ensure equitable comparisons. Multi-objective optimization, based on exergoeconomic and exergoenvironmental criteria, is employed to identify Pareto-optimal operating conditions. To accelerate this complex process, neural networks are utilized. The study concludes with a feasibility assessment of large-scale LNG production in Iran, offering practical insights for optimizing process selection and enhancing the economic and environmental viability of LNG technologies. Simulations show that the MFC-Linde cycle as the most efficient regarding specific energy consumption (0.2563 kWh/kgLNG), coefficient of performance (3.184), and exergy efficiency (52.32 %). It also demonstrates the lowest unit exergy cost (3.67$/GJ) and exergy unit environmental impact (5271.86mPts/GJ). Multi-objective optimization, considering both exergetic-economic and exergetic-environmental criteria, using neural networks and genetic algorithms in MATLAB identifies Pareto-optimal conditions for all processes. For the MFCLinde, as the most efficient process, optimal operating conditions in the exergetic-economic trade off scenario are: Exergy efficiency of process = 51.45% and Exergy cost rate of LNG = 82, 162.15$/h; at Pressure of NG feed = 5, 925.32kPa, Pressure drop in valve = 5, 831.99kPa, and NG side temperature in heat exchanger = -168.34 degrees C. Finally, a feasibility study for large-scale LNG (Liquefied Natural Gas) production in Iran shows promising results, with a return on investment of 32.24 %/year and a payback period of 2.34 years, indicating the project's potential success in regions with abundant NG reserves.Article Citation - WoS: 1Citation - Scopus: 1Design and Comprehensive Analysis of a Solar-Biomass Hybrid System With Hydrogen Production and Storage: Towards Self-Sufficient Wastewater Treatment Plants(Pergamon-Elsevier Science Ltd, 2025) Tabriz, Zahra Hajimohammadi; Kasaeian, Alibakhsh; Mohammadpourfard, Mousa; Shariaty-Niassar, MojtabaThis paper comprehensively investigates a novel solar-biomass hybrid system designed to produce power, heating, hydrogen, methane, and digestate. The system's design is grounded in regional weather patterns and site-specific resource availability. A comprehensive thermodynamic and exergoeconomic analysis, based on the first and second laws of thermodynamics, is performed alongside parametric studies to evaluate the influence of key parameters on system performance. Multi-objective optimization employs a genetic algorithm facilitated by an artificial neural network to reduce computational time and balance exergy efficiency and total cost. The Pareto front is generated, and the TOPSIS method is employed to identify the optimal trade-off point. The system integrates an auxiliary boiler powered by stored hydrogen and methane to maintain consistent operation during periods of low solar irradiance. Key findings include a base-case overall energy efficiency of 78.67 % and exergy efficiency of 60.41 %. The base-case unit cost of hydrogen is determined to be $3.174/kg, demonstrating competitive viability. Integrating the biomass subsystem with the solar plant resulted in a 40 % increase in exergy efficiency and a 35 % improvement in the total unit cost of products compared to a stand-alone solar system. Optimized system parameters yielded an exergy efficiency of 55.52 % and a total cost rate of 14.98 M $/year. These results confirm the potential of this hybrid system as a promising sustainable solution for developing self-sufficient wastewater treatment plants.Book Part Citation - Scopus: 1Biomass-Based Polygeneration Systems With Hydrogen Production: a Concise Review and Case Study(Springer Science and Business Media Deutschland GmbH, 2024) Hajimohammadi Tabriz,Z.; Mohammadpourfard,M.; Gökçen Akkurt,G.; Çağlar,B.This chapter discusses the importance of biomass-based polygeneration systems in producing hydrogen as a clean and safe energy carrier. The benefits of polygeneration systems, which can produce multiple products and minimize waste, are highlighted, and the need for clean and efficient hydrogen production is emphasized. This study gives a brief overview of hydrogen production from biomass-based polygeneration systems, which examines the systems in two main classifications: systems that use biomass as a potential and rich source of hydrogen and systems that exploit the energy content of biomass to run hydrogen production units. Furthermore, a new multigeneration system with hydrogen production has been introduced and thermodynamically evaluated. Also, its results have been obtained in a real situation. Overall, this chapter offers insights into the potential of biomass-based polygeneration systems in meeting energy demands while reducing environmental impact. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.Article Citation - WoS: 12Citation - Scopus: 12Enhancing a Bio-Waste Driven Polygeneration System Through Artificial Neural Networks and Multi-Objective Genetic Algorithm: Assessment and Optimization(Elsevier Ltd, 2024) Hajimohammadi Tabriz,Z.; Taheri,M.H.; Khani,L.; Çağlar,B.; Mohammadpourfard,M.This paper aims to study the feasibility of municipal sewage sludge utilization as an energy source in a polygeneration system. This system offers distinctive benefits such as contribution to the principled removal of sewage sludge, simultaneous utilization of raw and digested sludge in different parts of the system, and production of renewable hydrogen from bio-waste. 4E (energy, exergy, exergoeconomic, and environmental) analyses, are performed to understand the system performance comprehensively. Then, parametric studies are examined the impact of changing the values of main parameters on the system operation. Afterward, a multi-objective optimization based on a genetic algorithm is carried out to achieve optimal values, considering a trade-off between the exergy efficiency and the total cost rate. Meanwhile, this work harnesses the potential of artificial neural networks to expedite complex and time-consuming optimization processes. According to the results, the gasifier exhibits the highest rate of exergy destruction, and the primary cost of consumption is attributed to its heat supply. The multi-objective optimization findings show that the optimum point has an exergy efficiency of 38.26 % and a total cost rate of 58.17 M$/year. The hydrogen production rate, energy efficiency, and net power generation rate for the optimal case are determined as 1692 kg/h, 35.24 %, and 4269 kW, respectively. Also, the unit cost of hydrogen in the optimal case is obtained 1.49 $/kg which offers a cost-effective solution for hydrogen production. © 2024 Hydrogen Energy Publications LLCArticle Citation - WoS: 7Citation - Scopus: 7Comprehensive Thermoeconomic Study of a New Solar Thermosyphon-Assisted Multigeneration System(Elsevier, 2023) Anamaq, Rasoul Najafi; Khani, Leyla; Mohammadpourfard, Mousa; Heris, Saeed Zeinali; Gökçen Akkurt, GüldenNowadays, due to the global energy crisis, limited reservoirs of fossil fuels, and their negative environmental effects, the use of renewable energy sources and multigeneration systems have become good alternatives for conventional thermodynamic systems. One of these resources, whose technology has developed rapidly in recent years, is the use of solar energy for the simultaneous generation of various products. Therefore, in this research, a multigeneration system with several subsystems is introduced. The proposed system includes a solar energy collector to receive thermal energy, two thermal energy storage tanks, an organic Rankine cycle, and a Kalina cycle to generate electricity, a multi-effect distillation unit to produce fresh water, an electrolyzer to produce hydrogen, as well as heat recovery for hot water and hot air generation. In this multigeneration system, the cooling unit is designed with the help of a thermosyphon. The performance of the proposed system is studied from energy, exergy, environmental, and exergoeconomic viewpoints using Aspen HYSYS and EES software. The obtained results show that due to the addition of the thermosyphon unit to the refrigeration system, the exergy efficiency increases from 55.62% to 70.26%. As a result of this combination, the performance of the whole system is improved and the amount of costs are reduced. In addition, the parabolic collector system has the highest exergy destruction ratio, 39%, among the subsystems. Furthermore, the results of the exergoeconomic analysis indicate that the PEM water heater with 33.3% and the ejector with 22.7% own the highest cost destruction rates.Article Citation - WoS: 38Citation - Scopus: 40Exergoeconomic Analysis and Optimization of a High-Efficient Multi-Generation System Powered by Sabalan (savalan) Geothermal Power Plant Including Branched Gax Cycle and Electrolyzer Unit(Elsevier, 2022) Seiiedhoseiny, Miryasin; Khani, Leyla; Mohammadpourfard, Mousa; Gökçen Akkurt, GüldenEmploying suitable subsystems to reach high efficiency and low cost in renewable-based power plants is more crucial. The geothermal energy heat source is located in many countries, but this has never been investigated to run a multi-generation system, including a branched GAX cycle and an electrolyzer. In this path, a high-efficient multi-generation system powered by a Sabalan (Savalan) geothermal power plant consisting of a single flash cycle, a branched GAX cycle, and an electrolyzer is presented and scrutinized from thermodynamic and exergoeconomic viewpoints. In the end, a two-objective optimization, by using the Total Unit Cost of Product (TUCP) and energy efficiency as objectives, is utilized to find the optimum operating conditions. Critiques and studies of variables reveal that the produced hydrogen rate remains unchanged at 5.655 kg/h by changing the degassing value and temperature of the generator, condenser 2, and evaporator. By increasing the flash tank pressure from 5.2 bar to 7 bar, the cooling and heating loads rise about 108.4%, while the net electricity falls from 3977 kW to 3506 kW. Interestingly, the TUCP has a minimum value at the evaporator temperature of 273 K and condenser 2 temperature of 322.3 K. The optimization results indicate the values of the produced hydrogen rate and net electricity with 5.85 kg/h and 4187 kW are more than those of the base case. Also, the optimal values are 7.046 $/GJ, 36.82%, and 65.42% for the TUCP and energy and exergy efficiencies, respectively.