Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Article Cryofixation Strategy for Fabrication of Robust Gelatin-Polyester Conductive Biocomposites(Taylor & Francis Inc, 2026) Koksal, Busra; Onder, Ahmet; Yildiz, Umit HakanThe development of mechanically robust and electroconductive biomaterials is critical for advancing tissue engineering strategies, particularly in neural, cardiac and musculoskeletal applications. Here, we report a polycaprolactone (PCL)-gelatin conductive polymer (poly(3,4-ethylenedioxythiophene):polystyrene sulfonate, PEDOT:PSS) biocomposite with tunable mechanical and electrical properties, fabricated via the cryofixation process relying on rapid reaction between isocyanate-terminated PCL, gelatin and PEDOT:PSS. Two isocyanate sources, hexamethylene diisocyanate (HDI) or isophorone diisocyanate (IPDI) were employed to obtain reactive end-functionalized PCLHDI and PCLIPDI. The cryofixation (at -18 degrees C) of PCLHDI or PCLIPDI, gelatin and PEDOT:PSS was found to occur in unfrozen microdomains and enabled the resultant gel with an inherited network of ice, thereby increasing porosity. Electroconductivity was introduced via the incorporation of PEDOT:PSS, yielding conductive cryogels with porous morphology. The resulting scaffolds exhibited a Young's modulus of 637 Pa and electrical conductivity of 197 mu S/cm, alongside biocompatible nature of gelatin-based gels. This multifunctional platform offers significant promise for the engineering of electrically active tissues.Article Citation - WoS: 5Citation - Scopus: 6Fabrication of Gelatin-Polyester Based Biocomposite Scaffold Via One-Step Functionalization of Melt Electrowritten Polymer Blends in Aqueous Phase(Elsevier B.V., 2024) Köksal,B.; Kartal,R.B.; Günay,U.S.; Durmaz,H.; Yildiz,A.A.; Yildiz,Ü.H.The rapid manufacturing of biocomposite scaffold made of saturated-Poly(ε-caprolactone) (PCL) and unsaturated Polyester (PE) blends with gelatin and modified gelatin (NCO-Gel) is demonstrated. Polyester blend-based scaffold are fabricated with and without applying potential in the melt electrowriting system. Notably, the applied potential induces phase separation between PCL and PE and drives the formation of PE rich spots at the interface of electrowritten fibers. The objective of the current study is to control the phase separation between saturated and unsaturated polyesters occurring in the melt electro-writing process and utilization of this phenomenon to improve efficiency of biofunctionalization at the interface of scaffold via Aza-Michael addition reaction. Electron-deficient triple bonds of PE spots on the fibers exhibit good potential for the biofunctionalization via the aza-Michael addition reaction. PE spots are found to be pronounced in which blend compositions are PCL-PE as 90:10 and 75:25 %. The biofunctionalization of scaffold is monitored through C[sbnd]N bond formation appeared at 400 eV via X-ray photoelectron spectroscopy (XPS) and XPS chemical mapping. The described biofunctionalization methodology suggest avoiding use of multi-step chemical modification on additive manufacturing products and thereby rapid prototyping of functional polymer blend based scaffolds with enhanced biocompatibility and preserved mechanical properties. Additionally one-step additive manufacturing method eliminates side effects of toxic solvents and long modification steps during scaffold fabrication. © 2024 Elsevier B.V.Article Citation - WoS: 23Citation - Scopus: 26Fish scale containing alginate dialdehyde-gelatin bioink for bone tissue engineering(IOP Publishing Ltd, 2023) Özenler, Aylin Kara; Distler, Thomas; Tıhmınlıoğlu, Funda; Boccaccini, Aldo RThe development of biomaterial inks suitable for biofabrication and mimicking the physicochemical properties of the extracellular matrix is essential for the application of bioprinting technology in tissue engineering (TE). The use of animal-derived proteinous materials, such as jellyfish collagen, or fish scale (FS) gelatin (GEL), has become an important pillar in biomaterial ink design to increase the bioactivity of hydrogels. However, besides the extraction of proteinous structures, the use of structurally intact FS as an additive could increase biocompatibility and bioactivity of hydrogels due to its organic (collagen) and inorganic (hydroxyapatite) contents, while simultaneously enhancing mechanical strength in three-dimensional (3D) printing applications. To test this hypothesis, we present here a composite biomaterial ink composed of FS and alginate dialdehyde (ADA)-GEL for 3D bioprinting applications. We fabricate 3D cell-laden hydrogels using mouse pre-osteoblast MC3T3-E1 cells. We evaluate the physicochemical and mechanical properties of FS incorporated ADA-GEL biomaterial inks as well as the bioactivity and cytocompatibility of cell-laden hydrogels. Due to the distinctive collagen orientation of the FS, the compressive strength of the hydrogels significantly increased with increasing FS particle content. Addition of FS also provided a tool to tune hydrogel stiffness. FS particles were homogeneously incorporated into the hydrogels. Particle-matrix integration was confirmed via scanning electron microscopy. FS incorporation in the ADA-GEL matrix increased the osteogenic differentiation of MC3T3-E1 cells in comparison to pristine ADA-GEL, as FS incorporation led to increased ALP activity and osteocalcin secretion of MC3T3-E1 cells. Due to the significantly increased stiffness and supported osteoinductivity of the hydrogels, FS structure as a natural collagen and hydroxyapatite source contributed to the biomaterial ink properties for bone engineering applications. Our findings indicate that ADA-GEL/FS represents a new biomaterial ink formulation with great potential for 3D bioprinting, and FS is confirmed as a promising additive for bone TE applications.Article Citation - WoS: 1Citation - Scopus: 1Fabrication and in Vitro Evaluation of Thermally Cross-Linked Gelatin Nanofibers for Drug Delivery Applications(Taylor & Francis, 2022) Mete, Derya; Göktaş, Gözde; Şanlı Mohamed, GülşahIn this study, four different nanofibers consisting of gelatin (Gel), doxorubicin (DOX) with gel (DOX@Gel), a composite of gel with poly(ethylene glycol) (PEGylated-gel), and DOX@PEGylated-gel were fabricated. Subsequently, the nanofibers were thermally cross-linked in order to offer a stable and biocompatible alternative for the biological applications of nanofibers such as drug delivery and tissue engineering. Nanofibers were characterized by scanning electron microscopy, Fourier Transform-Infrared Spectroscopy (FT-IR), and confocal microscopy. The formation of smooth, continuous, and uniform nanofibers was observed and the addition of PEG resulted in an increase whereas the incorporation of DOX into nanofibers had no significant change in the diameter of nanofibers. Crosslinking also enlarged the diameter of all nanofibers and the most dramatic increase was observed 53% by DOX@PEGylated-gel. Afterward, the biological performance of the nanofibers was investigated by drug release profile, cytotoxicity on A549 cell line as well as antimicrobial activity with E. coli and S. aureus. The results indicate an enhanced drug release profile, moderate antimicrobial activity, and reasonable cytotoxic efficiency for thermally cross-linked nanofibers compared to uncross-linked nanofibers.Article Citation - WoS: 5Citation - Scopus: 6Boosting Up Printability of Biomacromolecule Based Bio-Ink by Modulation of Hydrogen Bonding Pairs(Elsevier Ltd., 2020) Köksal, Büşra; Önbaş, Rabia; Başkurt, Mehmet; Şahin, Hasan; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes low dose UV curable and bioprintable new bioink made of hydrogen bond donor-acceptor adaptor molecule 2-isocyanatoethyl methacrylate (NCO)modified gelatin (NCO-Gel). Our theoretical calculations demonstrate that insertion of 2-isocyanatoethyl methacrylate doubles the interaction energy (500 meV) between gelatin chains providing significant contribution in interchain condensation and self-organization as compared to methacrylic anhydride modified gelatin (GelMA). The NCO-Gel exhibits peak around 1720 cm?1 referring to bidentate hydrogen bonding between H-NCO and its counterpart O[dbnd]CN[sbnd]H. These strong interchain interactions drive chains to be packed and thereby facilitating UV crosslinking. The NCO-Gel is exhibiting a rapid, 10 s gelation process by the exposure of laser (3 W, 365 nm). The dynamic light scattering characterization also reveals that NCO-Gel has faster sol to gel transition as compared to GelMA depending on the UV curing time. The NCO-Gel was found to be more firm and mechanically strong that provides advantages in molding as well as bioprinting processes. Bioprinted NCO-Gel has shown sharp borders and stable 3D geometry as compared to GelMA ink under 10 s UV curing time. The cell viability tests confirm that NCO-Gel facilitates cell proliferation and supports cell viability. We foresee that NCO-Gel bioink formulation provides a promising opportunity when low dose UV curing and rapid printing are required. © 2020 Elsevier LtdArticle Citation - WoS: 90Citation - Scopus: 101A Rapid Atr-Ftir Spectroscopic Method for Classification of Gelatin Gummy Candies in Relation To the Gelatin Source(Elsevier, 2019) Çebi, Nur; Doğan, Canan Ekinci; Ekin Meşe, Ayten; Özdemir, Durmuş; Arıcı, Muhammet; Sağdıç, OsmanGelatin is widely used in gummy candies because of its unique functional properties. Generally, porcine and bovine gelatins are used in the food industry. FTIR-ATR combined with chemometrics analysis such as hierarchical cluster analysis (HCA) (OPUS Version 7.2 software), principal component analysis (PCA) (OPUS Version 7.2 software) and partial least squares-discriminant analysis (PLS-DA) (Matlab R2017b) were used for classification and discrimination of gelatin gummy candies related to their gelatin source. The spectral region between 1734 and 1528 cm(-1) was selected for chemometric analysis. The potential of FTIR spectroscopy for determination of bovine and porcine source in gummy candies was examined and validated by a real-time polymerase chain reaction (PCR) method. Twenty commercial samples were tested by developed ATR-FTIR methodology and RT-PCR technique, mutually confirming and supporting results were obtained. Gummy candies were classified and discriminated in relation to the bovine or porcine source of gelatin with 100% success without any sample preparation using FTIR-ATR technique.Article Citation - WoS: 48Citation - Scopus: 58Micro-Encapsulation of Ozonated Red Pepper Seed Oil With Antimicrobial Activity and Application To Nonwoven Fabric(John Wiley and Sons Inc., 2013) Özyıldız, Figen; Karagönlü, S.; Başal, Güldemet; Uzel, Ataç; Bayraktar, OğuzIn recent years, functional fabrics possessing antimicrobial activity have drawn significant interest because antibiotic resistance is becoming widespread among pathogenic micro-organisms. The aim of this study was to produce microcapsules incorporating ozonated red pepper seed oil (ORPSO) with antimicrobial properties and apply them to nonwoven fabrics to prepare functional textiles. Red pepper seed oil (RPSO) was ozonated and micro-encapsulated via a complex coacervation method using gelatin (GE) and gum arabic (GA) as wall materials. While micro-encapsulation yield and oil loading decreased with increases in the amount of surfactant, the mean particle size increased. The antimicrobial activity of the oil was tested via the disc diffusion method. The microcapsules were also tested using the agar well method. While RPSO had no effect on the test micro-organisms, the ORPSO and microcapsules containing ORPSO were found to be active against the test micro-organisms. The microcapsules were then applied to nonwoven fabric using the padding method to produce a disposable functional textile. The microcapsule-impregnated functional fabrics provided a 5 log decrease in 1 h. It is therefore possible to functionalize nonwoven fabrics to have antimicrobial activity against antibiotic-resistant micro-organisms, using microcapsules containing ORPSO.