Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Citation - Scopus: 4One-step hydrothermal synthesis of spinel manganese oxide ion-sieve from commercial Γ-Mno2 and its uptake performance for lithium(Elsevier Ltd, 2024) Toprak, Seyra; Demir, Mustafa MuammerThe selective extraction of lithium from aqueous systems necessitates efficient sorbent materials. Spinel-type lithium manganese oxide ion sieves (LMOs) have been bee recognized for their high performance in this application. However, the elevated market cost of the spinel form (λ-MnO2) raises economic concerns, posing challenges to the feasibility of the extraction process. In this study, the one-step hydrothermal synthesis of Li1.33Mn1.67O4 was carried out at 200 °C for 7 days using commercial γ-MnO2 powder and aqueous LiOH solution as reactants. The synthesized powder exhibited characteristic XRD reflections consistent with spinel Li1.33Mn1.67O4. Lithium ion-sieve (H1.33Mn1.67O4) was obtained by leaching the LMO product with dilute hydrochloric acid solution. The sorption capacity of γ-MnO2 is increased from 8.4 to 23.1 mg/g (C0=200 mg/L), this capacity is very close to the one of the commercial λ-MnO2. The synthesized spinel HMO sorbent achieved a maximum Langmuir adsorption capacity of 52.1 mg/g. The extraction efficiency reached 94% at the sorbent dose of 20 g/L. The distribution coefficients of metal ions were in the order Li+ > Ca2+ > K+ > Na+, emphasizing selective Li+ extraction from brines with high Na+ content. These findings highlight the successful development of a spinel-type lithium manganese oxide ion sieve from γ-MnO2 polymorph, which is nearly an order of magnitude cheaper than the selective λ-MnO2. The study addresses critical issue of economic feasibility in lithium extraction processes, providing a potential solution for the selective recovery of bulk lithium. © 2024 Elsevier LtdArticle Citation - Scopus: 6Lithium Extraction From Geothermal Brine Using Γ-Mno2: a Case Study for Tuzla Geothermal Power Plant(Elsevier Ltd, 2024) Toprak, S.; Yılmaz, Selahattin; Öncel, Ç.; Baba, Alper; Yılmaz, S.; Demir, Mustafa Muammer; Baba, A.; Koç, G.A.; Demir, M.M.Geothermal brines contain high concentrations of ions and form a source of various valuable elements. The isolation of the elements from their water systems is a great challenge when the gradual depletion of ores in mining is considered. Attempts have been made for a long time to isolate valuable elements from aqueous mixtures prepared in the laboratory. However, those studies might not reflect the complexity of natural systems and might yield results that deviate significantly from the performance in real field systems. In this study, sorption is used to extract lithium ions from a representative field, Tuzla Geothermal Power Plant (TGPP) Turkey, using a mini-pilot reactor introduced to the reinjection well of the plant. Electrolytic manganese dioxide (γ-MnO2), a relatively inexpensive material widely used as the cathode material in lithium-ion batteries, was employed as a sorbent material for lithium. The sorption/desorption performance of the novel γ-MnO2 was investigated under various conditions. Sorption is performed at 360K and 2 bars. The maximum sorption performance was obtained at 1 h in Tuzla GPP. The desorption experiments were performed in acidic solutions. The concentration of Li+ in the desorption solution was found to be 25 mg/L on average when 10 g of γ-MnO2 was dispersed into 30 mL of the acidic aqueous solution. The first desorption solution was used consecutively for collecting more Li+ ions through the desorption of fresh brine-treated powder samples (cumulative desorption). By repeating this process four times consecutively, 230 mg/L of Li+ was obtained in the desorption solution. Moreover, the reusability of the γ-MnO2 sorbent was examined. The sorbent powder showed almost 40% performance efficiency compared to virgin powder under the conditions employed in this study. The use of electrolytic γ-MnO2 sorbent for lithium adsorption was found to be a promising process for practical use in the separation of lithium from geothermal brines. © 2024Article Citation - WoS: 13Citation - Scopus: 14Boron Removal From Geothermal Brine Using Hybrid Reverse Osmosis/Microbial Desalination Cell System(Elsevier, 2023) Jarma, Yakubu A.; Kabay, Nalan; Baba, Alper; Ökten, Hatice Eser; Gören, Ayşegül YağmurAgriculture sector leads worldwide as the most water consuming sector with water demand. Since natural water resources cannot keep up with the demand, a shift from conventional water resources to unconventional ones is needed. While geothermal water was gaining importance for its energy content, small-scale (<10 L/s) energy plants were not required to reinject their spent geothermal brine. As geothermal resources align with agricultural areas in Western Anatolia, discharge of untreated brine might have severe adverse effects on crop yields and soil quality. In this study, we investigated use of spent geothermal brine for irrigation after treatment with Reverse Osmosis/Microbial Desalination Cell (RO/MDC) hybrid process. Treatment efficiencies for B, COD, As, Li, Fe, Cr concentrations and energy production values were determined. Treated water was initially evaluated for irrigation considering three quality categories (I, II, and III) comprised of parameters such as electrical conductivity (EC), total dissolved solids (TDS), and sodium adsorption ratio (SAR), along with sodium, chloride and boron concentrations. Additionally, magnesium adsorption ratio (MAR) and permeability index (PI) were used to evaluate for irrigation suitability. Although B concentrations in MDC-treated permeate (3.29 mg/L) and concentrate (2.99 mg/L) streams were not low enough to meet Quality I criterion (<0.7 mg/L), they can be still utilized in irrigation of moderate-to-high tolerant plants. Furthermore, PI and MAR parameters pointed to suitability for irrigational use. © 2022Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 33Citation - Scopus: 37Energy Production From Treatment of Industrial Wastewater and Boron Removal in Aqueous Solutions Using Microbial Desalination Cell(Elsevier, 2021) Gören, Ayşegül Yağmur; Ökten, Hatice EserAs a result of a much needed paradigm shift worldwide, treated saline water is being considered as a viable option for replacing freshwater resources in agricultural irrigation. Vastly produced geothermal brine in Turkey may pose a significant environmental risk due to its high ionic strength, specifically due to boron. Boron species, which are generally found uncharged in natural waters, are costly to remove using high-throughput membrane technologies such as reverse osmosis. Recent advances in bioelectrochemical systems (BES) has facilitated development of energetically self-sufficient wastewater treatment and desalination. In this study, removal of boron from synthetic solutions and real geothermal waters, along with simultaneous energy production, using the microbial desalination cell (MDC) were investigated. Optimization studies were conducted by varying boron concentrations (5, 10, and 20 mg L-1), air flow rates (0, 1, and 2 L min(-1)), electrode areas (18, 24, 36, and 72 cm(2)), catholyte solutions, and operating modes. Even though the highest concentration decrease was observed for 20 mg-B L-1, 5 mg-B L-1 concentration experiment gave the closest result to the 2.4 mg-B L-1 limit value asserted by WHO. Effect of electrode surface area was proven to be significant on boron removal efficiency. Employing the optimum conditions acquired with synthetic solutions, boron and COD removal efficiencies from real geothermal brine were 44.3% and 90.6%, respectively. MDC, being in its early levels of technology readiness, produced promising desalination and energy production results in removal of boron from geothermal brine.Article Citation - WoS: 83Citation - Scopus: 90Packed Bed Column Dynamic Study for Boron Removal From Geothermal Brine by a Chelating Fiber and Breakthrough Curve Analysis by Using Mathematical Models(Elsevier Ltd., 2018) Recepoğlu, Yaşar Kemal; Kabay, Nalan; Yılmaz İpek, İdil; Arda, Müşerref; Yüksel, Mithat; Yoshizuka, Kazuharu; Nishihama, SyouheiIn this study, the performance of N-methyl-D-glucamine (NMDG) type functional group attached a novel boron selective chelating fiber adsorbent, Chelest Fiber GRY-HW, was investigated for boron removal from geothermal brine containing 10–11 mg B/L through a packed bed column. The effect of feed flow rate (Space Velocity, SV) on breakthrough capacity of Chelest Fiber GRY-HW was studied using various SV values (15, 20 and 30 h−1). The effect of SV on breakthrough capacity was particularly apparent when SV was decreased from 30 to 15 h−1. Yoon–Nelson, Thomas and Modified Dose Response (MDR) models were applied to the experimental data to estimate the breakthrough curves and model parameters such as rate constants and breakthrough times. The obtained results showed that the breakthrough curves were better described by Modified Dose Response (MDR) model than those described by Yoon-Nelson and Thomas models in each case. Also, the model estimations for adsorption capacity obtained by MDR model agreed well with the experimental results.