Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 3Investigation of External Magnetic Field Effect on the Performance of Ferrofluid-Based Single-Phase Natural Circulation Loops(Elsevier, 2023) Bozkır, Selim Can; Çobanoğlu, Nur; Doğanay, Serkan; Karadeniz, Ziya Haktan; Elçioğlu, Elif Begüm; Turgut, AlpaslanThe goal of this study is to investigate the performance of a Single-Phase Natural Circulation mini Loop (SPNCmL) operating under the influence of an external magnetic field (EMF). For this purpose, a numerical SPNCmL model working with Fe3O4 ferrofluids (1-3 vol%.) under the influence of an EMF is developed to reflect the effect of a NdFeB permanent magnet with a remanence of 1.22 T located at the outlet of the cooler-end for the magnetic field generation. System characteristics such as temperature difference at heater-end (& UDelta;Theater) and maximum temperature (Tmax) and performance in terms of effectiveness (& epsilon;) are investigated. In addition, the effect of EMF on boundary layer energy transport along the cooler-end is evaluated in terms of the change in the local Nusselt number. Applying an EMF dramatically affects the system performance in terms of an increase in & UDelta;Theater and & epsilon;, respectively up to 34% and 25% compared to those with water. Tmax values are obtained by up to 9% higher for Fe3O4 ferrofluids compared to water, while applying EMF results in an increment in Tmax by up to 5%. Improved heat transfer performance by employing EMF at the cooler-end outlet of the SPNCmLs emphasizes their potential in cooling applications.Article Citation - WoS: 15Citation - Scopus: 16A Pore Scale Analysis for Determination of Interfacial Convective Heat Transfer Coefficient for Thin Periodic Porousmedia Undermixed Convection(Emerald Group Publishing Ltd., 2017) Çelik, Hasan; Mobedi, Moghtada; Manca, Oronzio; Özkol, ÜnverPurpose - The purpose of this study is to determine interfacial convective heat transfer coefficient numerically, for a porous media consisting of square blocks in inline arrangement under mixed convection heat transfer. Design/methodology/approach - The continuity, momentum and energy equations are solved in dimensionless form for a representative elementary volume of porous media, numerically. The velocity and temperature fields for different values of porosity, Ri and Re numbers are obtained. The study is performed for the range of Ri number from 0.01 to 10, Re number from 100 to 500 and porosity value from 0.51 to 0.96. Based on the obtained results, the value of the interfacial convective heat transfer coefficient is calculated by using volume average method. Findings - It was found that at low porosities (such as 0.51), the interfacial Nusselt number does not considerably change with Ri and Re numbers. However, for porous media with high Ri number and porosity (such as 10 and 0.51, respectively), secondary flows occur in the middle of the channel between rods improving heat transfer between solid and fluid, considerably. It is shown that the available correlations of interfacial heat transfer coefficient suggested for forced convection can be used for mixed convection for the porous media with low porosity (such as 0.51) or for the flow with low Ri number (such as 0.01). Originality/value - To the best of the authors' knowledge, there is no study on determination of interfacial convective heat transfer coefficient for mixed convection in porous media in literature. The present study might be the first study providing an accurate idea on the range of this important parameter, which will be useful particularly for researchers who study on mixed convection heat transfer in porous media, macroscopically.Article Citation - WoS: 5Citation - Scopus: 5Visualization of Heat Flow in a Vertical Channel With Fully Developed Mixed Convection(Elsevier Ltd., 2012) Çelik, Hasan; Mobedi, MoghtadaA study on visualization of heat flow in three channels with laminar fully developed mixed convection heat transfer is performed. The first channel is filled with completely pure fluid; the second one is completely filled with fluid saturated porous medium. A porous layer exists in the half of the third channel while another half is filled with pure fluid. The velocity, temperature and heat transport fields are obtained both by using analytical and numerical methods. Analytical expression for heat transport field is obtained and presented. The heatline patterns are plotted for different values of Gr/Re, thermal conductivity ratio, Peclet and Darcy numbers. It is found that the path of heat flow in the channel strongly depends on Peclet number. For low Peclet numbers (i.e., Pe = 0.01), the path of heat flow is independent of Gr/Re and Darcy numbers. However, for high Peclet numbers (i.e., Pe = 5), the ratio of Gr/Re, Darcy number and thermal conductivity ratio influence heatline patterns, considerably. For the channels with high Peclet number (i.e., Pe = 5), a downward heat flow is observed when a reverse flow exits. © 2012 Elsevier Ltd.