Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 12Citation - Scopus: 12Supercritical Fluid Reactive Deposition: a Process Intensification Technique for Synthesis of Nanostructured Materials(Elsevier, 2022) Yousefzadeh, Hamed; Akgün, Işık Sena; Barım, Şansım Bengisu; Sarı, Tarık Bercan; Eriş, Gamze; Uzunlar, Erdal; Bozbağ, Selmi Erim; Erkey, CanSupercritical fluid reactive deposition (SFRD) is a promising process intensification technique for synthesis of a wide variety of nanostructured materials. The enhanced mass transfer characteristics of supercritical fluids (SCFs) coupled with high solubilities of reducing gases in SCFs provide many advantages related to equipment size and time minimization over conventional techniques. Among SCFs, the emphasis has been placed on supercritical CO2 (scCO2) which is non-toxic, cheap and leaves no residue on the treated medium. Moreover, in SFRD, multiple processes such as dissolution, adsorption, reaction, and purification are combined in a single piece of equipment which is an excellent example of process integration for process intensification. In this review, the fundamental thermodynamic and kinetic aspects of the technology are described in detail. The studies in the literature on synthesis of a wide variety of nanostructured materials including supported nanoparticles, films, and ion-exchanged zeolites by SFRD are reviewed and summarized. The applications of these materials as catalysts and sensors are described. The review hopes to lead to further studies on further development of this technology for a wide variety of applications.Article Citation - WoS: 15Citation - Scopus: 14Electroactive Nanogel Formation by Reactive Layer-By Assembly of Polyester and Branched Polyethylenimine Via Aza-Michael Addition(American Chemical Society, 2021) Yıldırımkaraman, Öykü; Özenler, Sezer; Günay, Ufuk Saim; Durmaz, Hakan; Yıldız, Ümit HakanWe here demonstrate the utilization of reactive layer-by-layer (rLBL) assembly to form a nanogel coating made of branched polyethylenimine (BPEI) and alkyne containing polyester (PE) on a gold surface. The rLBL is generated by the rapid aza-Michael addition reaction of the alkyne group of PE and the -NH2 groups of BPEI by yielding a homogeneous gel coating on the gold substrate. The thickness profile of the nanogel revealed that a 400 nm thick coating is formed by six multilayers of rLBL, and it exhibits 50 nm roughness over 8 mu m distance. The LBL characteristics were determined via depth profiling analysis by X-ray photoelectron spectroscopy, and it has been shown that a 70-100 nm periodic increase in gel thickness is a consequence of consecutive cycles of rLBL. A detailed XPS analysis was performed to determine the yield of the rLBL reaction: the average yield was deduced as 86.4% by the ratio of the binding energies at 286.26 eV, (C CN-C bond) and 283.33 eV, (C C triple bond). The electrochemical characterization of the nanogels ascertains that up to the six-multilayered rLBL of BPEI-PE is electroactive, and the nanogel permeability had led to drive mass and charge transfer effectively. These results promise that nanogel formation by rLBL films may be a straightforward modification of electrodes approach, and it exhibits potential for the application of soft biointerfaces.Article Citation - WoS: 20Citation - Scopus: 23Effect of Humidity on Electrical Conductivity of Zinc Stearate Nanofilms(Elsevier Ltd., 2007) Öztürk, Serdar; Balköse, Devrim; Okur, Salih; Umemura, JunzoIn this work, stearic acid (StAc) and zinc stearate (ZnSt2) nanofilms were deposited on glass and silver substrates using Langmuir-Blodgett (LB) film technique and their structural and electrical properties were investigated. X-ray diffraction and IR techniques revealed that more crystalline and better films were obtained from ZnSt2 compare to StAc. Electrical conductivity of ZnSt2 LB films with 13 layers having 28 nm thickness were measured in the range of humidity of 20-60% and it is seen that the conductivity was very sensitive to relative humidity (RH) above 40% at 25 °C and showed no hysteresis during adsorption and desorption of water vapor. Water vapor adsorption isotherm of ZnSt2 powders was determined and conductivity increase with humidity was attributed to water vapor adsorption. Constant electrical conductivity of the ZnSt2 films at low relative humidities and at low voltage values is an advantageous property which allows using them as organic nanofilms with insulating properties.Article Citation - WoS: 185Pmma/Zinc Oxide Nanocomposites Prepared by In-Situ Bulk Polymerization(John Wiley and Sons Inc., 2006) Demir, Mustafa Muammer; Memesa, Mine; Castignolles, Patrice; Wegner, GerhardDispersing surface-modified zinc oxide nano-particles (ZnO) in methyl methacrylate (MMA) improves the free radical bulk polymerization process as well as the thermal stability of the formed polymer. Hydroxy groups available on the ZnO surface may induce a degenerative transfer. This suppresses the gel effect, which leads to a better control of the heat evolution during the late stages of polymerization. The formation of chains having vinylidene end groups and head-to-head links is suppressed, which shifts the onset of thermal decomposition to the regime where decomposition occurs by random chain scission.