Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Book Part Citation - Scopus: 8Graphene-Based Integrated Electronic, Photonic and Spintronic Circuit(wiley, 2013) Güçlü,A.D.; Potasz,P.; Hawrylak,P.A special class of nanoscale graphene triangular quantum dots (GTQDs) with zigzag edges fulfills all three functions needed for information processing: (i) size quantization turns graphene, a semimetal, into a semiconductor like silicon, with a bandgap tunable from THz to UV, enabling a GTQD-based single electron transistor for information processing; (ii) unlike silicon, GTQDs are equivalent to direct-gap semiconductors that absorb and emit light, and hence can be used for communication; and (iii) GTQDs exhibit a voltage-tunable magnetic moment that can be used for information storage. Therefore, graphene quantum dots might potentially be used as elements of graphene-based integrated electronic, photonic and spintronic circuit. This chapter describes progress toward the understanding of the electronic, optical and magnetic properties of graphene quantum dots. Controlled Vocabulary Terms electronic circuits; graphene; information management; integrated optoelectronics; magnetoelectronics; optical properties; photonics; semiconductor quantum dots © 2013 John Wiley. © 2013 John Wiley & Sons, Inc. Published 2013 by John Wiley & Sons, Inc.Article Citation - WoS: 3Citation - Scopus: 4Photocatalytic and Optical Properties of Zinc Oxide Structures Prepared at Different Urea Concentrations(Serban Solacolu Foundation, 2020) Uysal, Berk; Şen, Selin; Top, AybenIn this study, ZnO samples were synthesized using zinc acetate and urea with a method containing sonication, sol-gel transition and calcination steps. Urea to zinc acetate mole ratio values were changed as 0, 0.5, 1, and 2 and corresponding calcined samples were denoted as UZ-0, UZ-0.5, UZ-1, and UZ-2, respectively. Scanning electron microscopy (SEM) images indicated globular and rod-like structures. Aspect ratios of the nanorods increased as urea to zinc acetate ratio increased from 0 to 1 whereas nanoparticles with sizes of 70 +/- 20 nm were observed for UZ-2 sample. Brunauer, Emmett and Teller (BET) surface area values of the samples varied between 9 and 25 m(2)/g and increased as initial urea amount increased. Band gap energies of the samples ranged between 3.24 and 3.29 eV. Four major peaks at about 400, 420, 480 and 530 nm with different intensities were observed in the photoluminescence (PL) spectra of the samples. All the samples removed rhodamine B by both adsorption and photodegradation. The highest visible light induced photodegradation rate was exhibited by UZ-2 sample having the highest surface area and it is attributed to superior charge separation properties of this sample under visible light.Article Citation - WoS: 21Citation - Scopus: 21Prediction of Monoclinic Single-Layer Janus Ga2tex (x = S and Se): Strong In-Plane Anisotropy(American Physical Society, 2021) Yağmurcukardeş, Mehmet; Moğulkoç, Yeşim; Akgenç, Berna; Moğulkoç Aybey; Peeters, François M.By using density functional theory (DFT) based first-principles calculations, electronic, vibrational, piezo-electric, and optical properties of monoclinic Janus single-layer Ga2TeX (X = S or Se) are investigated. The dynamical, mechanical, and thermal stability of the proposed Janus single layers are verified by means of phonon bands, stiffness tensor, and quantum molecular dynamics simulations. The calculated vibrational spectrum reveals the either pure or coupled optical phonon branches arising from Ga-Te and Ga-X atoms. In addition to the in-plane anisotropy, single-layer Janus Ga2TeX exhibits additional out-of-plane asymmetry, which leads to important consequences for its electronic and optical properties. Electronic band dispersions indicate the direct band-gap semiconducting nature of the constructed Janus structures with energy band gaps falling into visible spectrum. Moreover, while orientation-dependent linear-elastic properties of Janus single layers indicate their strong anisotropy, the calculated in-plane stiffness values reveal the ultrasoft nature of the structures. In addition, predicted piezoelectric coefficients show that while there is a strong in-plane anisotropy between piezoelectric constants along armchair (AC) and zigzag (ZZ) directions, there exists a tiny polarization along the out-of-plane direction as a result of the formation of Janus structure. The optical response to electromagnetic radiation has been also analyzed through density functional theory by considering the independent-particle approximation. Finally, the optical spectra of Janus Ga2TeX structures is investigated and it showed a shift from the ultraviolet region to the visible region. The fact that the spectrum is between these regions will allow it to be used in solar energy and many nanoelectronics applications. The predicted monoclinic single-layer Janus Ga2TeX are relevant for promising applications in optoelectronics, optical dichroism, and anisotropic nanoelasticity.Article Citation - WoS: 13Citation - Scopus: 12Orthorhombic Cspbi3 Perovskites: Thickness-Dependent Structural, Optical and Vibrational Properties(Elsevier, 2020) Özen, Sercan; İyikanat, Fadıl; Özcan, Mehmet; Tekneci, Gülsüm Efsun; Eren, İsmail; Sözen, Yiğit; Şahin, HasanCesium lead halide perovskites have been subject to intense investigation, mostly because of their potential to be used in optoelectronic device applications. However, regarding the need for nanoscale materials in forthcoming nanotechnology applications, understanding of how the characteristic properties of these perovskite crystals are modified through dimensional crossover is essential. In this study, thickness-dependence of the structural, electronic and vibrational properties of orthorhombic CsPbI3, which is one of the most stable phase at room temperature, is investigated by means of state-of-the-art first-principles calculations. Our results show that (i) bilayers and monolayers of CsPbI3 can be stabilized in orthorhombic crystal symmetry, (ii) among; the possible ultra-thin perovskites only structures with CsI-terminated surface are dynamically stable (iii) electronic band gap increases with decrease in perovskite thickness due to quantum size effect and (iv) reflectivity and transmissivity of the orthorhombic CsPbI3 can be tuned by varying the thickness that modifies the electron confinement. (c) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 5Citation - Scopus: 4The Effect of Annealing Temperature on the Optical Properties of a Ruthenium Complex Thin Film(Elsevier Ltd., 2016) Ocakoğlu, Kasım; Okur, Salih; Aydın, Hasan; Emen, Fatih MehmetThe stability of the optical parameters of a ruthenium polypyridyl complex (Ru-PC K314) film under varying annealing temperatures between 278 K and 673 K was investigated. The ruthenium polypyridyl complex thin film was prepared on a quartz substrate by drop casting technique. The transmission of the film was recorded by using Ultraviolet/Visible/Near Infrared spectrophotometer and the optical band gap energy of the as-deposited film was determined around 2.20 eV. The optical parameters such as refractive index, extinction coefficient, and dielectric constant of the film were determined and the annealing effect on these parameters was investigated. The results show that Ru PC K314 film is quite stable up to 595 K, and the rate of the optical band gap energy change was found to be 5.23 × 10- 5 eV/K. Furthermore, the thermal analysis studies were carried out in the range 298-673 K. The Differential Thermal Analysis/Thermal Gravimmetry/Differantial Thermal Gravimmetry curves show that the decomposition is incomplete in the temperature range 298-673 K. Ru-PC K314 is thermally stable up to 387 K. The decomposition starts at 387 K with elimination of functional groups such as CO2, CO molecules and SO3H group was eliminated between 614 K and 666 K.Article Citation - WoS: 57Citation - Scopus: 61Electronic and Optical Properties of Bilayer Blue Phosphorus(Elsevier Ltd., 2016) Moğulkoç, Yeşim; Modarresi, Mohsen; Moğulkoç, Aybey; Çiftci, YaseminWe investigate the electronic and optical properties of monolayer and stacking dependent bilayer blue phosphorus in the framework of density functional theory (DFT) and tight-binding approximations. We extract the hopping parameters of TB Hamiltonian for monolayer and bilayer blue phosphorus by using the DFT results. The variation of energy band gap with applied external electric field for two different stacks of bilayer blue phosphorus are also shown. We examine the linear response of the systems due to the external electromagnetic radiation in terms of the dielectric functions in the DFT theory. The relatively large electronic band gap and possibility of exfoliation form bulk structure due to weak interlayer coupling, make blue phosphorus an appropriate candidate for future electronic devices.Article Citation - WoS: 45Polymers and Inorganics: a Happy Marriage?(Polymer Society of Korea, 2007) Wegner, Gerhard; Demir, Mustafa Muammer; Faatz, Michael; Gorna, Katazyrna; Munoz-Espi, Rafael; Guillemet, Baptiste; Gröhn, FranziskaThe most recent developments in two areas: (a) synthesis of inorganic particles with control over size and shape by polymer additives, and (b) synthesis of inorganic-polymer hybrid materials by bulk polymerization of blends of monomers with nanosized crystals are reviewed. The precipitations of inorganics, such as zinc oxide or calcium carbonate, in presence and under the control of bishydrophilic block or comb copolymers, are relevant to the field of Biomineralization. The application of surface modified latex particles, used as controlling agents, and the formation of hybrid crystals in which the latex is embedded in otherwise perfect crystals, are discussed. The formation of nano sized spheres of amorphous calcium carbonate, stabilized by surfactant-like polymers, is also discussed. Another method for the preparation of nanosized inorganic functional particles is the controlled pyrolysis of metal salt complexes of poly (acrylic acid), as demonstrated by the syntheses of lithium cobalt oxide and zinc/magnesium oxide. Bulk polymerization of methyl methacrylate blends, with for example, nanosized zinc oxide, revealed that the mechanisms of free radical polymerization respond to the presence of these particles. The termination by radical-radical interaction and the gel effect are suppressed in favor of degenerative transfer, resulting in a polymer with enhanced thermal stability. The optical properties of the resulting polymer-particle blends are addressed based on the basic discussion of the miscibility of polymers and nanosized particles.