Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 6Photocatalytic Activity of Dye-Sensitized and Non-Sensitized Go-Tio2 Nanocomposites Under Simulated and Direct Sunlight(Wiley-Blackwell, 2022) İlhan, Hatice; Durmaz Çaycı, Gamze Belkis; Aksoy, Erkan; Diker, Halide; Varlıklı, CananGraphene oxide (GO), amine-modified graphene oxide (mGO), and N-TiO2 composites were synthesized by low-temperature hydrothermal method and characterized by using X-ray diffraction, X-ray photoelectron spectroscopy, FTIR, and BET analysis techniques. The films of synthesized TiO2, mGO:TiO2, N-TiO2, GO:TiO2, GO:N-TiO2, and commercially available P25 were prepared by doctor blade method. These films and their perylene-3,4,9,10-tetracarboxy tetrabutylester (PTE)-sensitized forms were employed as photocatalysts for the photodegradation of rhodamine-B (RhB) under Xe lamp and direct sunlight irradiations. Independent from the irradiation source, the photocatalytic order of the non-sensitized films were GO:N-TiO2 > GO:TiO2 > N-TiO2 > mGO:TiO2 > TiO2 > P25, but seven and 15 folds of increments were detected under direct sunlight irradiation. PTE-sensitized catalyst films exhibited more than two folds of increase in the photocatalytic rate constants compared to their non-sensitized counterparts under Xe lamp irradiation. Under direct sunlight irradiation no matter which photocatalyst was used, the photocatalytic activity of these films was enhanced seven folds. Reusability tests revealed no significant changes in the photocatalytic rate constants obtained with both the non-sensitized and sensitized films.Article Citation - WoS: 4Citation - Scopus: 4Optical and Photocatalytic Properties of Zno and Zns Structures Formed as Controlled Calcination Products of L-Cysteine Assisted Aqueous Precipitation(Elsevier, 2020) Şen, Selin; Top, AybenZnO and ZnS structures were obtained by the calcination of the aqueous precipitation products of Zn(NO3)2, NaOH and L-cysteine (Cys). Initial Cys:Zn molar ratios were changed as 0.1:1, 0.5:1, 1:1 and 1.5:1. All the precursors were transformed into ZnO upon calcination at 700 °C. ZnS structures were obtained by calcining the precursors prepared at the Cys:Zn ratios of 1 and 1.5 at 350 °C. In addition to changing chemical composition of the precipitation products, calcination temperature and initial Cys:Zn ratio also affected morphology, surface area, photoluminescence and photocatalytic properties of the final products. Free exciton energy values of the ZnO samples were observed to be between 3.29 eV and 3.35 eV. PL spectra of the ZnO samples indicated blue and green emission centers. Zinc interstitials (Zni), revealed by the blue emissions in the PL spectra were also confirmed by Auger Zn L3M4.5M4.5 spectra. The samples calcined at 350 °C removed rhodamine B mainly by adsorption. All the samples calcined at 700 °C successfully degraded the dye under UV light. Among the samples calcined at 700 °C, ZnO sample prepared at Cys:Zn = 0.5, which has the highest surface area and unique photoluminescence spectrum exhibited the fastest photodegradation rate. © 2020 Elsevier LtdArticle Citation - WoS: 8Citation - Scopus: 12A Box–behnken Design (bbd) Optimization of the Photocatalytic Degradation of 2,4-Dichlorophenoxyacetic Acid (2,4-D) Using Tio2/H2o2(Desalination Publications, 2018) Doğdu Okçu, Gamze; Baldan Pakdil, Nazlı; Ökten, Hatice Eser; Yalçuk, Arda2,4-Dichlorophenoxyacetic acid (2,4-D), a chlorinated phenoxy-alkanoic herbicide, is used extensively in agriculture. This work investigates TiO2/H2O2 mediated UV photocatalytic degradation of 2,4-D in a laboratory-scale photoreactor. Three levels of Box–Behnken design technique, combined with response surface methodology (RSM), were used to design the experiments. Two kinds of multivariate experimental design (pH, TiO2, and 2,4-D concentration) and (pH, TiO2, and H2O2 concentrations) were employed to establish two quadratic models (Model 1 and Model 2), showing the functional relationship between degradation rate of 2,4-D and three independent experimental parameters. Model 1 predicted optimum values for pH, TiO2, and 2,4-D concentrations to be 5.7, 1.20 g L−1, and 32 mg L−1, respectively. Model 2 predicted optimum values for pH, TiO2, and initial H2O2 concentrations to be 4.94, 1.34 g L−1, and 161 mg L−1. Degradation rate of 2,4-D approached 78.10% for Model 1 and 83.63% for Model 2. For both models, similar results were obtained through optimizing variables by RSM and using single factorial batch reactor operation. Regression analysis showed good agreement between experimental results and predictive values for Models 1 and 2, with R2 values of 0.9958 and 0.9976, respectively.Article Citation - WoS: 4Citation - Scopus: 7Heterogeneous Photocatalytic Degradation and Mineralization of 2,4-Dichlorophenoxy Acetic Acid (2,4-D): Its Performance, Kinetics, and Economic Analysis(Desalination Publications, 2019) Doğdu Okçu, Gamze; Ökten, Hatice Eser; Yalçuk, ArdaThe photocatalytic degradation and mineralization of commercial solution of 2,4-dichlorophenoxy-acetic acid (2,4-D) was carried out by UVA/P25 TiO 2 and UVA/P25 TiO 2 /H 2 O 2 oxidation processes under batch-mode conditions. In UVA + TiO 2 photocatalysis (TiO 2 1.5 gL −1 , pH 5, initial 2,4-D 25 mg L −1 ), 97.47% ± 0.27% degradation, 39.89% ± 3.42% mineralization, and 65.52% ± 4.88% oxidation were achieved in 180 min, and in UVA +TiO 2 + H 2 O 2 photocatalysis (TiO 2 1.5 g L −1 , pH 5, initial 2,4-D 25 mg L −1 , H 2 O 2 150 mg L −1 ), 99.74% ± 0.08% degradation, 55.99% ± 2.67% mineralization, and 82.49% ± 1.90% oxidation were obtained in 180 min. The pseudo-first-order kinetic model fitted the experimental data well, and the photocatalytic degradation process was explained by the modified L–H model; k c and K LH were 1.293 mg L −1 min −1 and 0.232 L mg −1 , respectively. Fourier transform infrared (FTIR) spectroscopy spectra and scanning electron microscopy (SEM) analysis indicated degradation of organic bonds of the herbicide and adsorption of 2,4-D particles onto the TiO 2 catalyst during 24-h experiments. Moreover, the dependence of k app on the half-life time was determined by calculating the electrical energy per order (E EO ). UVA/TiO 2 /H 2 O 2 photocatalysis may be applied as a pretreatment to 2,4-D herbicide wastewater at a pH of 5 for biological treatment.