Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Effects of Span 60 Template and Freeze Drying on Zinc Borate Produced From Zinc Nitrate Hexahydrate and Borax Decahydrate(Taylor and Francis Ltd., 2022) Alp, Burcu; Gönen, Mehmet; Atakul Savrık, Sevdiye; Balköse, DevrimZinc borate is an important additive to polymers and lubricants. The process variables such as reactant concentration, presence of template in precipitating medium and drying method determine the composition and particle size of zinc borates. In the present study, zinc borate precipitate obtained by mixing aqueous zinc nitrate and borax decahydrate solutions was dried either by conventional method or by freeze drying. The products were well characterized by advanced methods. Zinc borate from 1 mol dm(-3) reactants had (2.1 +/- 0.5)x(2.5 +/- 0.5)x(1.3 +/- 0.2) mu m and (0.5 +/- 0.1)x(1.3 +/- 0.1)x(0.028 +/- 0.01) mu m dimensions by conventional and freeze drying respectively. Individual particles smaller in size is obtained since the particles are not agglomerated due to absence of surface tension of liquid water for case of freeze drying. Planar particles agglomerated into 20 to 60 mu m crystals in the presence of template Span 60 in 1 mol dm(-3) reactants for conventional drying. Nano zinc borate particles with primary particle size of (46 +/- 9) nm were obtained by decreasing the reactant concentration to 0.1 mol dm(-3). The primary particle size was decreased to (40 +/- 3) nm by addition of Span 60 to dilute solutions. However zinc borate nanoparticles obtained from dilute solutions adhered to each other forming agglomerates during conventional drying. Their freeze drying would allow formation of a freely flowing nano powder.Article Citation - WoS: 3Citation - Scopus: 3Investigations of Flame Retardant Properties of Zinc Borate Accompanying With Huntite and Hydromagnesite in Polymer Composites(Polish Mineral Engineering Society, 2020) Atay, Hüsnügül Yılmaz; İçin, Öykü; Kuru, BuketFires have been a danger to human beings for the centuries. As people lost their lives and property in fires, they tried to fight the fire and their efforts in this area continued increasingly. Unfortunately, it is still not possible to completely reset the risk of starting the fire. But it seems likely to extinguish immediately after the fire has started, and this is very important to save people's lives. Scientists have been working in this field in recent years; they are concentrated on producing fire-resistant materials using different materials. This can be provided by different ways; either fire-resistant material can be produced new, or the fire resistivity can be provided by incorporating the additive material into a flammable material. In our previous studies, we used huntite and hydromagnesite minerals to give fire resistance property to polymer materials, very successful results were obtained. In this study, huntite and hydromagnesite minerals were used for accompanying with zinc borate in polypropylene composites in order to increase the flame retardant property of a polymeric materials. Different content of minerals were blended with polypropylene, and composites were produced by twin-screw extruder for observing synergistic effect. Scanning electron microscopy (SEM) analyses were conducted to determine the structural and morphological properties of the composites. Thermal properties were determined according to thermogravimetric analysis (TGA). Tensile and three point bending tests were carried out to obtain mechanical properties. Flame retardant performance was evaluated according to UL 94 vertically flammability test. It was concluded that very good synergistic effects were obtained that zinc borate was significantly influential with huntite/hydromagnesite in the flammability characteristics of composites because higher char formation is observed with zinc borate addtion. Moreover, the zinc borate reduced the smoke generated during combustion.Article Citation - WoS: 6Citation - Scopus: 8Dehydration, Water Vapor Adsorption and Desorption Behavior of Zn[b3o3(oh)5] · H2o and Zn[b3o4(oh)3](Taylor and Francis Ltd., 2012) Alp, Burcu; Gönen, Mehmet; Atakul Savrık, Sevdiye; Balköse, Devrim; Ülkü, SemraThe dehydration behaviors of two different hydrated zinc borate species, Zn[B3O3(OH)5] · H2O and Zn[B3O4(OH)3], which are industrially important flame retardants, were studied by thermal gravimetric(TG) analysis and in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. Dehydration onset temperatures of Zn[B3O3(OH)5] · H2O and Zn[B3O4(OH)3] were 129 and 320°C, respectively, at a 10°C/min ramp rate. A very small amount of boric acid was volatilized in addition to water vapor when both samples were heated at 250°C. A significant amount of water vapor was adsorbed by Zn[B3O3(OH)5] · H2O from air at 25°C. However, Zn[B3O4(OH)3] adsorbed a very small amount of water under the same conditions. Both zinc borates did not have a tendency to cake during storage.Article Citation - WoS: 17Citation - Scopus: 23Synthesis of Zinc Borate by Inverse Emulsion Technique for Lubrication(Springer Verlag, 2011) Atakul Savrık, Sevdiye; Balköse, Devrim; Ülkü, SemraLubricating oil additives based on boron compounds are promising materials for lubrication due to their tribological advantages such as antiwear efficiency, good film strength, and high temperature resistance. This article deals with the preparation of zinc borate particles that are well dispersed and colloidally stabilized in mineral oil. This method starts with preparing two inverse emulsions (water-in-oil) with sorbitan monostearate (Span 60) as a surfactant, light neutral oil as a continuous phase, and the aqueous solutions of borax decahydrate (Na2B4O7·10H 2O) and zinc nitrate (Zn(NO3)2·6H 2O) as the dispersed phases. The produced particles were zinc borate crystals having both rod-like and spherical morphologies, and the diameters of spherical particles were changing between 20 and 30 nm. FTIR spectra of the obtained particles showed the characteristic peaks of trihedral borate (B(3)-O) and tetrahedral borate (B(4)-O) groups as well as the specific peaks of the sorbitan monostearate. TG showed 30.42% and 22.08% mass loss at 600 °C for the samples prepared by inverse emulsion and precipitation techniques, respectively. The endothermic peak at 50 °C is observed due to the melting of sorbitan monostearate and the heat of melting is evaluated as -3.50 J/g. Tribological studies revealed that sorbitan monostearate not only outperformed as a dispersing agent of inorganic particles, but also it proved to be an anti-wear agent. Zinc borate produced by precipitation decreased the wear scar diameter from 1.402 to 0.639 mm and the friction coefficient from 0.099 to 0.064. The inverse emulsion was effective in decreasing wear scar diameter and the friction coefficient by lowering them to 0.596 and 0.089 mm, respectively.