Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
57 results
Search Results
Now showing 1 - 10 of 57
Article Citation - WoS: 15Citation - Scopus: 17Effect of Different Microencapsulating Materials on the Viability of S. Thermophilus Ccm4757 Incorporated Into Dark and Milk Chocolates(Elsevier Ltd., 2021) Öztürk, Burcu; Elvan, Menşure; Özer, Merve; Tellioğlu Harsa, ŞebnemThis study aimed to evaluate the viability and bioaccessibility of Streptococcus thermophilus CCM4757 strain supplemented in dark and milk chocolates during storage period and pass through simulated in vitro gastro-intestinal tract. Microencapsulated and non-microencapsulated S. thermophilus CCM4757 strain added into the chocolates. Emulsion technique was used to microencapsulate cells with various biopolymers; carboxymethylcellulose, pectin, gum arabic, and cellobiose. The microencapsulated S. thermophilus with these coating materials was found to be viable higher than 9 log CFU/g up to 180 days of storage at 4 °C. Microbiological, physicochemical, and sensorial attributes of the chocolates containing microencapsulated and non-microencapsulated S. thermophilus CCM4757 were analyzed. The microencapsulated S. thermophilus showed a good survivability in milk (7.12 log CFU/g) and dark (6.90 log CFU/g) chocolate samples during 180-day storage at 4 °C. Supplementation of S. thermophilus did not affect significantly (P > 0.05) the sensory attributes of the chocolates. The results showed that S. thermophilus CCM4757 exhibited good cell survivability higher than 85% in chocolates under simulated gastro-intestinal fluids. S. thermophilus supplementation into the chocolate protected the viability of cells and did not affect the sensorial characteristics and moisture content of chocolates. The present study demonstrated that the dark and milk chocolates could be used as an important matrix to carry probiotics. © 2021 Elsevier LtdArticle Citation - WoS: 14Citation - Scopus: 14Dispersion Stability of Amine Modified Graphene Oxides and Their Utilization in Solution Processed Blue Oled(Elsevier Ltd., 2020) Diker, Halide; Bozkurt, Hakan; Varlıklı, CananGraphene oxide (GO) was modified with amine derivatives which contain short (SACA) and long (LACA) alkyl chains. SACAs were n-propylamine, dipropylamine, propanolamine and LACAs were 2-ethylhexylamine, di-hexylamine, dioctylamine, and 1,12-diaminododecane and modified GOs (mGOs) were named as nPRYLA-GO, DPRYLA-GO, PRPOHA-GO, 2EHA-GO, DHA-GO, DOA-GO, and DADOD-GO, respectively. Amine modification resulted in approximately 2-folds of decrement in d-spacing of GO (8.36 angstrom). The C:O ratio, N% and d-spacing values were increased as the alkyl chain length of amine source increased. Except for PRPOHA-GO, all of the mGOs were thermally stable until 100 degrees C. All mGOs were dispersed in dimethylformamide (DMF), ethylene glycol (EG) and isopropyl alcohol (iPA). Regardless of their structural differences, all of the mGOs formed stable dispersions in DMF, whereas SACA-mGOs and LACA-mGOs were compatible with EG and iPA, respectively. DMF, EG and iPA dispersions of DOA-GO, 2EHA-GO, nPRYLA-GO and PRPOHA-GO were doped in Al4083 and prepared composites were utilized as hole transport layer in solution processed blue OLEDs. Ground state energy levels of Al4083:DOA-GO, Al4083:EG, Al4083:PRPOHA-GO, Al4083:2EHA-GO and Al4083:nPRYLA-GO extracted from their X-ray photoelectron spectra were 0.49 eV, 0.67 eV, 0.91 eV, 0.98 eV and 1.00 eV below the work function of ITO, respectively. Among all Al4083:mGOs, the best device performance was obtained with the device that contains Al4083:DOA-GO (in EG), which presented 1.6, 1.7 and 1.5 fold enhancements in current, power and external quantum efficiencies, respectively, compared to those of Al4083:EG based device.Article Identification and Visualization of Cell Subgroups in Uncompensated Flow Cytometry Data(Elsevier Ltd., 2020) Güzel, Başak Esin Köktürk; Karaçalı, BilgeWe propose a new method for identification and visualization of cell-sub groups in uncompensated multi-color flow cytometry data. The method combines annealing-based model-free expectation-maximization to identify cell sub-groups and joint diagonalization on clustered data for better visualization. The proposed method was evaluated on a real, publicly available 8-color flow cytometry dataset manually gated beforehand for lymphocytes. The results obtained in three separable scenarios indicate that the method accurately identifies cell subgroups while properly adjusting visualization of identified cell groups by reducing the spectral overlap between the different fluorochrome channels.Article Citation - WoS: 7Citation - Scopus: 9Experimental Apparatus for Simultaneous Measurement of Triboelectricity and Triboluminescence(Elsevier Ltd., 2020) Arıca, Tuğçe A.; Topçu, Gökhan; Pala, Atamert; Demir, Mustafa MuammerTriboelectricity is a phenomenon caused by the accumulation of opposite electric charges on the surfaces of two different materials as a result of contact with each other. The phenomenon of emitting cold light when the material is subjected to physical deformation is called triboluminescence. This paper presents an experimental apparatus that allows simultaneous measurement of both triboelectricity and triboluminescence of a model composite system based on poly (vinylidene fluoride) (PVDF) and europium tetrakis (dibenzoylmethide) triethylammonium (EuD(4)TEA). While the former component was studied in contact-separation mode giving triboelectricity, the latter emits triboluminescence upon application of mechanical impact. The device was operated at varying range of frequencies from 0.5 to 4.8 Hz and the force in the range of 5.4-9.5 N. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 13Citation - Scopus: 14Soil Erosion Model Tested on Experimental Data of a Laboratory Flume With a Pre-Existing Rill(Elsevier Ltd., 2020) Aksoy, Hafzullah; Gedikli, Abdullah; Yılmaz, Murat; Eriş, Ebru; Ünal, N. Erdem; Yoon, Jaeyoung; Tayfur, GökmenPrediction of sediment discharge transported within flow is strongly needed in order to provide measures for a well-established erosion control and water quality management practice. Initiated by runoff generation and erosion processes sediment transport is influenced by microtopography over hillslopes of hydrological watersheds. Consideration of microtopography provides more accurate results. In this study, a process-based two-dimensional rainfall-runoff mathematical model is coupled with erosion and sediment transport component. Both the rainfall-runoff and sediment transport components make simulations in rills and over interrill areas of a bare hillslope. Models at such fine resolution are rarely verified due to the complexity of rills and interrill areas. The model was applied on a data set compiled from laboratory experiments. Erosion flume was filled with granular sand to replace a bare soil. A longitudinal rill and an interrill area were pre-formed over the soil in the flume before the simulated rainfall exerted on. The flume was given both longitudinal and lateral slopes. The simulated rainfall was changed between 45 mm/h and 105 mm/h and exerted on granular uniform fine and medium sand in the erosion flume with longitudinal and lateral slopes both changing from 5% to 20%. Calibration of the model shows that it is able to produce good results in terms of sedigraphs, which suggest also that the model might be considered an important step to verify and improve watershed scale erosion and sediment transport models.Article Citation - WoS: 14Citation - Scopus: 14Transfer of Development Rights for the Effectiveness of the Conservation Plans: a Case From Historic Kemeralti, Izmir(Elsevier Ltd., 2020) Güzle, Gamze; Akpınar, Figen; Duvarcı, YavuzThe "Cultural and Natural Asset Protection" law implemented the transfer of development rights as a new tool for land use planning and management incorporated in the heritage conservation of Turkey in 2004, but no substantive implementation has yet been developed. There is no question that the inclusion of the transfer right is a significant advantage by statute, but the design and execution of TDR needs a guideline, a model proposal. The objective of the study is therefore twofold: 1) to explore the potential and pitfalls of incorporating TDR to conserve heritage sites with a set of factors derived from existing literature and 2) to propose a model for creating and calculating TDR to achieve density limitation in built-up heritage sites. Based on empirical evidence and actual implementation of TDRs, some generic factors in the literature affect the success of TDR programs, particularly in the United States. We, therefore, decided to use a set of fundamental factors to fully evaluate the efficacy of TDR in the Turkish planning system. On the other hand, there is also a lack of research for a successful framework that uses TDR for heritage conservation in general in literature. This study aims to overcome all these shortcomings by making a general evaluation of the integration of TDR into to the planning systems, to show the intrinsic quality of heritage conservation and TDR potentials, and finally to provide a straightforward guide to a TDR model. Evidence indicates that while TDR provides the potential to preserve Kemeralti's cultural heritage as a new market-based instrument, its use should be carefully designed and regulated by public authorities, Izmir's municipality, and the community at all.Article Citation - WoS: 19Citation - Scopus: 19Navigating Cie Space for Efficient Tadf Downconversion Woleds(Elsevier Ltd., 2020) Aksoy, Erkan; Danos, Andrew; Varlıklı, Canan; Monkman, Andrew P.High efficiency orange and green emitting perylene dyes have been synthesized and dispersed in an inert polymer host to form an optical downconversion layer. To avoid dye aggregation and allow controlled colour tuning, this layer was deposited in multiple low-concentration spin-coating steps, directly on top of a high performance blue thermally activated delayed fluorescence (TADF) organic light emitting diode (OLED). The orange downconversion layer partially absorbs the blue OLED emission, while emitting a complementary orange to give white light. However, as energy transfer between the TADF and perylene downconverter is based on emission and reabsorption, absorptive filtering of the blue OLED emission band necessitates the inclusion of an additional green-emitting perylene top-layer to achieve optimal white balance. The optimised white OLED fabricated in this way displayed excellent white colour balance (CIE x, y; 0.33, 0.33) with perfect stability, good colour rendering (CRI 80), and a high maximum efficiency (maximum EQE 17.2%) with minimal losses compared to the base blue OLED. This approach is widely applicable for generating white emission from any kind of blue OLED, and is compatible with a wide range of downconverting dyes and host materials.Article Citation - WoS: 32Citation - Scopus: 33Variation of Structural and Optical Properties of Tio2 Films Prepared by Dc Magnetron Sputtering Method With Annealing Temperature(Elsevier Ltd., 2020) Gürakar, Sibel; Ot, Hakan; Horzum, Şeyda; Serin, TülayTiO2 thin films are deposited by direct current magnetron sputtering method on the silicon and quartz substrates. The effect of annealing temperature on the film properties are analysed by using X-ray diffraction (XRD), Raman scattering, atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical spectroscopy measurements. Raman and XRD results reveal that the crystal structure of the TiO2 film is strongly affected by the annealing temperature. The crystal structure of the coated film is changed from amorphous to anatase structure after annealing at 500 degrees C. Anatase and rutile phases of TiO2 start to coexist after annealing at 800 degrees C. Rutile phases of TiO2 become dominant for film annealed at 900 degrees C. SEM and AFM images uncover that the morphology, grain size and surface roughness of TiO2 films vary with the annealing temperature. The optical band gap decreases from 3.35 to 2.90 eV as the phase transforms from amorphous to rutile.Article Citation - WoS: 8Citation - Scopus: 8Study of Boron Doped Amorphous Silicon Lightly Hydrogenated Prepared by Dc Magnetron Sputtering for Infrared Detectors Applications(Elsevier Ltd., 2020) Ketroussi, K.; Cherfi, R.; Yahia, Seba, H.; Tata, S.; Chabane, L.; Özyüzer, Lütfi; Rahal, A.The objective of this study is to investigate the effect of boron doping concentration on the bolometric properties of lightly hydrogenated amorphous silicon doped with boron (a-Si: H(B)) films. Thin film a-Si: H(B) samples with different boron concentrations are prepared by co-sputtering of boron and silicon at relatively low hydrogen pressure. FTIR analyses show that the intensity of the characteristic peak of the substitutional boron gradually increases with the addition of boron. Increasing in boron concentration affects the bolometric properties of the lightly hydrogenated a-Si: H (B) films, including conductivity at room temperature (?RT) and thermal resistance coefficient (TCR). Indeed, when the boron concentration increases from 1.5 to 43%, ?RT increases from 1.4 10?6 to 2 10?3 ??1 cm?1 while the absolute value of TCR decreases from 3% to 8% K?1, respectively. In addition, lightly hydrogenated a-Si: H (B) films exhibit good thermal stability. We have showed in this study that lightly hydrogenated a-Si: H(B) can be considered as a potential candidate for low-cost, high-performance uncooled micro bolometers. © 2020 Elsevier B.V.Article Citation - WoS: 23Citation - Scopus: 30Experimental Investigation of a Decentralized Heat Recovery Ventilation System(Elsevier Ltd., 2020) Pekdoğan, Tuğçe; Tokuç, Ayça; Ezan, Mehmet Akif; Başaran, TahsinIndoor air quality is an important issue for improving and maintaining the indoor environment because it is directly related to people's health and work performance. These days, in many settlements, the applicability of natural ventilation is limited in the face of the decreasing infiltration loads, increased atmospheric pollution, and the climatic conditions. Therefore, the use of mechanical systems that are designed to ensure proper ventilation is becoming widespread. This paper presents full-scale experimental research of a wall-integrated decentralized ventilation system with heat recovery in the laboratory conditions. The heat recovery unit includes a ceramic block for sensible thermal energy storage. Parametric experimental studies were carried out to obtain the temperature distributions and the thermal capacity of the ceramic block during the supply and exhaust modes of working. In order to simulate the winter and summer conditions, two large scale temperature-controlled rooms are built up. The duration of the ventilation period is varied to be 1, 2, 5, 7.5 and 10-min. Experimental measurements indicate that 2 min of operation time shows the best thermal performance in terms of maintaining a comfortable indoor temperature with the least energy consumption. And some shortcomings were observed about the fan and thermal storage limitations. © 2020 Elsevier Ltd