Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 28Citation - Scopus: 33Cold Sintering as a Promising Isru Technique: a Case Study of Mars Regolith Simulant(Elsevier, 2023) Karacasulu, Levent; Karl, David; Gurlo, Aleksander; Ahmetoğlu, Çekdar VakıfMars regolith simulant (MGS-1) was densified for the first time via a cold sintering process (CSP) as a novel in-situ resource utilization (ISRU) concept. The technique comprises the utilization of NaOH solution as a liquid media during the densification of simulant powder with <100 μm particle size. In as short as 30 min, with the increase in the NaOH concentration (from 3 M to 10 M) and processing temperature (from 150 °C to 250 °C), the relative densities of the regolith compacts and the mechanical properties were enhanced. The artifacts produced with Mars regolith simulant powder at 250 °C using 10 M NaOH solution yielded a relative density of around 88% and compressive strength reaching ∼45 MPa.Article Citation - WoS: 7Citation - Scopus: 7Hydrothermal Synthesis of Potassium–sodium Niobate Powders(Wiley, 2022) Pişkin, Cerem; Karacasulu, Levent; Ischia, Gloria; Bortolotti, Mauro; Ahmetoğlu, Çekdar VakıfPotassium–sodium niobates (KxNa1−xNbO3, 0 < x < 1, KNN) were hydrothermally synthesized under varying alkaline ratios (K+/Na+), total hydroxide concentration, reaction temperature, and time. Compositional surveys were developed by using Rietveld analyses derived quantitative volume fractions. The data demonstrated that phase pure KNN synthesis can be achieved by reacting the niobium source with the hydroxide solution having 6 M total hydroxide concentration, cation ratio (K+/Na+) of above 6 at temperatures ≥200°C for 24 h. Dissolution–precipitation events through intermediate products including hexaniobates were postulated as a plausible formation mechanism. It was shown also that the single-phase KNN approaching the morphotropic phase boundary (MPB) could be obtained by further incorporation of sodium ions into the crystal via post-annealing at 800°C/2 h, following the hydrothermal synthesis.