Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 21Citation - Scopus: 28Non-Iridescent Structural Colors From Uniform-Sized Sio2 Colloids(Elsevier Ltd., 2018) Topçu, Gökhan; Güner, Tuğrul; Demir, Mustafa MuammerStructural colors have recently attracted interest from diverse fields of research due to their ease of fabrication and eco-friendliness. These types of colors are, in principle, achieved by periodically arranged submicron-diameter colloidal particles. The interaction of light with a structure containing long-range ordered colloidal particles leads to coloration; this usually varies depending on the angle of observation (iridescence). However, the majority of the applications demand constant color that is independent of the viewing angle (non-iridescence). In this work, silica colloids were obtained using the Stöber method at different sizes from 150 to 300 nm in an alcoholic dispersion. The casting of the dispersion on a substrate leaves behind a photonic crystal showing a colorful iridescent film. However, centrifugation and redispersion of the SiO2 particles into fresh solvent may cause the formation of small, aggregated silica domains in the new dispersion. The casting of this dispersion allows for the development of photonic glass, presumably due to the accumulation of aggregates showing stable colloidal film independent of viewing angle. Moreover, depending on the size of the silica colloids, non-iridescent photonic glasses with various colors (violet, blue, green, and orange) are obtained.Article Citation - WoS: 18Citation - Scopus: 21Evaluation of Heat Treated Clay for Potential Use in Intervention Mortars(Elsevier Ltd., 2010) Budak, Meral; Akkurt, Sedat; Böke, HasanIn this study, raw material compositions, basic physical, mineralogical, microstructural and hydraulic properties of lime mortars used in two selected historic buildings were determined by XRD, SEM-EDS and TGA analyses. The results showed that the mortars were hydraulic due to the use of pozzolanic aggregates. Taking into account the hydraulic characteristics of mortars due to the use of pozzolanic aggregates, the possibility of obtaining hydraulic mortars by using pozzolanic aggregates produced from heated commercial clays was investigated. For this purpose, four clay samples used in the ceramic industry in Turkey were heated at varying temperatures of 400, 450, 500, 550, 600, 800, and 1200°C with a heating rate of 10°C/min. Pozzolanic properties of heated clay samples were determined. The results showed that commercial clays studied are well suited for use as pozzolanic aggregates when they are heated between 500 and 700. °C. This is also confirmed by testing the compressive strengths of the three month aged laboratory-produced mortars that contained thermally treated clay (at 600°C) as pozzolanic aggregates. Compressive strength of this mortar was around 5. MPa which is satisfactorily high. © 2009 Elsevier B.V.Article Citation - WoS: 14Citation - Scopus: 15Neutralization of an Extremely Acidic Sludge and Stabilization of Heavy Metals in Flyash Aggregates(Elsevier Ltd., 2007) Polat, Mehmet; Güler, Erkan; Lederman, Eli; Cohen, HaimAn extremely acidic, heavy metal-rich sludge (pH = -1.2) was scrubbed with a Class-F fly ash in order to simultaneously neutralize the acidity and stabilize the heavy metals contained in both wastes. This paper outlines the leaching behavior of the aggregate material generated by scrubbing. For proper fly ash/sludge ratios, the fly ash acted as an outstanding neutralizer for the acidic waste. Leaching of heavy metals from the aggregate samples was below the environmental limits within a pH range between 3 and 9. Subsequent washing of the leached aggregate with acidic CALWET solutions did not result in an additional release of heavy metals. It is proposed that coordinative bonding of the metal cations onto neutral surface sites and electrostatic adsorption led to stabilization of the heavy metals within the aggregate structure below hydrolysis pHs.Article Citation - WoS: 12Probing Nanoscale Domains of J-Aggregates Deposited on a Mica Surface(American Chemical Society, 2004) Demir, Mustafa Muammer; Özçelik, Serdar; Birkan, BurakJ-aggregates of 1,1′,3,3′-tetraethyl-5,5′,6,6′- tetrachlorobenzimidazolocarbocyanine (TTBC) were deposited on a mica surface and probed by atomic force microscopy operated at tapping mode in air. Optical spectra showed that J-aggregates were formed in aqueous solutions. Atomic force microscopy images revealed that J-aggregates deposited on mica surfaces mainly present single domains with a mean height of 2.00 ± 0.25 nm and an average diameter of 100 ± 20 nm. Quantitative analysis of the morphology of images indicated that the single domain of J-aggregates exhibits very uniform height and diameter distributions with polydispersity indices of 1.02 and 1.04, respectively. Based on the results, we propose a two-dimensional nanostructure in which TTBC J-aggregates could be arranged in a monolayer.Article Citation - WoS: 6Citation - Scopus: 6Hierarchial Coassembly of a Cyanine Dye in Poly(vinyl Alcohol) Fibrous Films by Electrospinning(American Chemical Society, 2013) Demir, Mustafa Muammer; Horzum, Nesrin; Özen, Bengisu; Özçelik, SerdarWe report molecular aggregate formation of TTBC (1,1′,3,3′- tetraethyl-5,5′,6,6′-tetrachlorobenzimidazolocarbocyanine) in submicrometer-sized PVA (poly(vinyl alcohol)) fibers by electrospinning. The formation of the molecular aggregate is examined by solution and instrumental parameters of electrospinning. The precursor solution of PVA/TTBC, in the range of 0.016-0.065 wt % is subjected to electrospinning under an electrical field ranging from 0.95 to 1.81 kV cm-1. Both randomly deposited and uniaxially aligned fibers are achieved by using two parallel-positioned metal strips as counter electrode. Photoluminescence and polarized Fourier transform infrared spectroscopies are employed to determine spectral properties of the fibers. H-aggregates are formed within the electrospun fibers, regardless of their alignment, and H- and J-type aggregates coexist in the alternative spin-coated and the cast films. A strongly polarized photoluminescence emission is observed in the direction of uniaxially aligned fibers as a result of the orientation of the H-aggregates along the fiber axis. We demonstrate that electrospinning is a process capable of forming and orienting TTBC aggregates during the structural development of the polymer/dye nanofibers. These fibrous films may potentially find applications in optics and electronics.