Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
12 results
Search Results
Now showing 1 - 10 of 12
Article Citation - WoS: 1Citation - Scopus: 1Understanding the Role of a Specific Microenvironment in Personal Exposure To Semi-Volatile Organic Compounds Using Silicone Wristbands(Royal Soc Chemistry, 2025) Akmermer, Zulfikar; Demirtepe, HaleAssessment of personal exposure to semi-volatile organic compounds was facilitated using silicone wristbands (SWBs), an easy-to-use sampler that reflects total inhalation and dermal exposure from all the microenvironments and the activities in which the user was involved. Hence, SWBs help understand exposure from various routes, activities, and microenvironments. Offices are critical microenvironments where workers spend one-third of their daily time on weekdays; hence exposure from offices should be more extensively studied. This study aimed to investigate the personal exposure of university personnel and elaborate on the contribution of the exposure due to the office air to their overall exposure using SWBs. One SWB was worn by the participant, and another was hung in their office. After seven days of sampling on the wrist, exposure to polycyclic aromatic hydrocarbons (PAHs) was found to be related to combustion activities at home or from open fire, whereas exposure to organophosphate esters and phthalates was suggested to originate from building materials, such as flooring materials and paints, and consumer products, e.g. mattresses and furniture. PAHs in the participants' offices were influenced by the transport of outdoor air and phthalates from the ceiling material. Then, we estimated the equivalent air concentrations using the SWBs sampled from the offices and previously developed sampling rates and partition coefficients. The estimated office air exposure contributions to total inhalation and dermal exposure were 83%, 51%, and 39% for fluorene, tri(n-butyl) phosphate, and tris(2-chloro isopropyl) phosphate, respectively. These findings were consistent with the statistical analysis of personal data. To conclude, this study highlighted the importance of specific microenvironments in our exposure to particular SVOCs, offering strategies for indoor air quality management and human health risk assessment.Article Citation - WoS: 3Citation - Scopus: 3A Novel MIP Electrochemical Sensor Based on a CuFe2O4NPs@rGO Nanocomposite and Its Application in Breast Milk Samples for the Determination of Fipronil(Royal Soc Chemistry, 2025) Njjar, Muath; Akturk, Ezgi Zekiye; Kaya, Ahmet; Onac, Canan; Akdogan, AbdullahBackground: fipronil, a widely utilized insecticide in agriculture, has been shown to have potential health implications as it can accumulate in the environment and affect human health. Electrochemical sensors, specifically those incorporating molecularly imprinted polymers (MIPs), provide an efficient way for the detection of fipronil because of their selectivity and specificity. The combination of CuFe2O4NPs and reduced graphene oxide (rGO) exhibits a synergistic effect that enhances sensitivity and selectivity. The composite's effective properties provide a robust platform for fipronil determination in various matrices. This study detected fipronil using an electrochemical sensor based on a glassy carbon electrode (GCE) modified with MIP@CuFe2O4NPs@rGO. Results: the synthesized MIP@CuFe2O4NPs@rGO material was characterized using various techniques such as Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (FESEM), X-ray diffraction (XRD) analysis, energy dispersive X-ray (EDX) analysis, Brunauer-Emmett-Teller (BET) analysis, X-ray photoelectron spectroscopy (XPS) analysis, and electrochemical impedance spectroscopy (EIS). The modified GCE showed enhanced electrochemical behavior for fipronil, as demonstrated by cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. Optimization of parameters such as pH, pyrrole concentration, and template concentration further improved sensor performance. The sensor exhibited a linear dynamic range of 1 to 6 nM, with a limit of detection (LOD) of 0.30 nM (S/N = 3) and a limit of quantification (LOQ) of 1.08 nM (S/N = 10), highlighting its sensitivity and reliability. The precision of the method was excellent, with a relative standard deviation of less than 4.0%. When applied to quantify fipronil in breast milk samples, the sensor showed high accuracy and precision, with recoveries ranging from 96.24% to 97.75%. Significance: the sensor offers several advantages, including high sensitivity, specificity, and accuracy. Its ability to detect fipronil in complex matrices such as breast milk highlights its potential for real-world applications in environmental and health monitoring. Overall, this research paves the way for the development of efficient, rapid and eco-friendly sensors for detecting pesticide residues in various environmental and biological samples.Article Pvc/Pan-immobilized H2TiO3 Adsorbent: a Tailored Titanium-Based Lithium-Ion Sieve for High-Performance Lithium Recovery(Royal Soc Chemistry, 2025) Recepoglu, Yasar Kemal; Ipek, Onur; Yuksel, AsliThe increasing demand for lithium, driven by the rapid development of electric vehicles and energy storage systems, has created a pressing need for efficient and sustainable lithium recovery technologies. Conventional methods often face challenges related to selectivity, environmental impact, and scalability, necessitating the development of alternative materials. In this study, a polyvinyl chloride/polyacrylonitrile (PVC/PAN)-immobilized titanium-based lithium-ion sieve (HTO) was synthesized for lithium recovery from aqueous media, including geothermal brine. The objective was to obtain a selective, reusable, and mechanically stable adsorbent suitable for industrial-scale applications. The synthesized PVC/PAN-HTO composite was characterized by FT-IR, BET, XRD, and SEM techniques. Batch adsorption studies showed that the optimum lithium recovery occurred at pH 12, with efficiencies of 98.7% in model lithium solutions and 91.6% in geothermal water using a 4 g L-1 adsorbent dosage. Adsorption kinetics followed a pseudo-second-order model, and the Langmuir isotherm provided the best fit, indicating monolayer adsorption with a maximum capacity of 5.79 mg g-1. Thermodynamic analysis confirmed that the adsorption process is spontaneous and exothermic. Reusability tests demonstrated stable performance over three adsorption-desorption cycles, confirming the potential of PVC/PAN-HTO for practical lithium extraction applications.Article Citation - WoS: 1Citation - Scopus: 1Phase-Dependent Optical, Photocatalytic and Capacitive Properties of Tungsten Oxide Nanowires(Royal Soc Chemistry, 2025) Kahraman, Zeynep; Gungor, Ahmet; Buldu-Akturk, Merve; Tan, Metin; Alp, Emre; Erdem, Emre; Genc, AzizTransition metal oxides hold great promise across a wide range of applications due to favorable properties such as high abundance, low toxicity, and excellent stability. Nanoengineering approaches are essential for controlling the structural, optical, and electronic properties of these materials, enabling the achievement of desired characteristics in a cost-effective and environmentally friendly manner. In this study, we synthesize stoichiometric (WO3) and sub-stoichiometric (WO3-x) tungsten oxide nanowires by controlling their phases and morphologies through the hydrothermal method. This approach allows us to systematically investigate the effects of different phases and oxygen vacancies on the optical properties, as well as on photocatalytic and supercapacitance applications. We use the photodegradation of RhB as a benchmark for photocatalytic activity under various experimental conditions, revealing that oxygen vacancies significantly influence photocatalytic behavior. For example, WO3-x nanowires adsorb/degrade a substantial amount of RhB within short durations under ambient conditions, where WO3 nanowires are mostly inactive. The addition of H2O2 enhances the photocatalytic performance of WO3 nanowires over 30 minutes, with even better results under low pH conditions with H2O2. This study also explores the phase-dependent electrochemical properties of WO3 and WO3-x nanowires, providing insights into their potential for improved supercapacitor performance by leveraging their complementary properties in symmetric and asymmetric configurations. WO3-x, with a higher density of oxygen vacancies and thinner structure, offers enhanced conductivity and increased active sites for charge storage, resulting in superior specific capacitance and charge retention.Article Citation - WoS: 3Citation - Scopus: 4Magsity Platform: a Hybrid Magnetic Levitation-Based Lensless Holographic Microscope Platform for Liquid Density and Viscosity Measurements(Royal Soc Chemistry, 2025) Ince, Oyku Doyran; Tekin, H. CumhurThe viscosity and density of liquids are the most extensively studied material properties, as their accurate measurement is critical in various industries. Although developments in micro-viscometers have overcome the limitations of traditional bulky methods, more accessible technologies are required. Here, we introduce a novel magnetic levitation-based method to measure the viscosity and density of solutions in a microcapillary channel. This principle exploits microparticles as microsensors to correlate levitation time and height with solutions' viscosity and density, using buoyancy and drag forces. The platform has an integrated lensless holographic microscope, providing a hybrid system for in situ and precise measurements. By utilizing this hybrid technology, portable, rapid and cost-effective measurements can be conducted. This platform enables viscosity and density measurements within 7 minutes, achieving high accuracies of at least 97.7% and 99.9%, respectively, across an operation range of 0.84-5.09 cP and 1.00-1.09 g cm-3. The platform is utilized to clearly distinguish differences in the spent cell culture medium across various cell lines. This method, as presented, can be readily applied to measure a diverse array of liquids in multiple domains, encompassing biotechnology, medicine, and engineering.Article Nitrate Sensing With Molecular Cage Ionophores: a Potentiometric Approach(Royal Soc Chemistry, 2025) Onder, Ahmet; Begar, Ferit; Kibris, Erman; Buyukcakir, Onur; Yildiz, Umit HakanNitrate ions are widespread environmental pollutants in water and soil, posing critical risks to both human health and ecosystems. This study introduces a molecular cage as a novel ionophore for potentiometric nitrate-selective ion-selective electrodes (ISEs) designed for enhanced specificity and sensitivity. Among six synthetic candidates, the electrode incorporating a 1,3,5-tri(p-hydroxyphenyl)benzene-based chlorotriazine pillared cage molecule (CAGE-1) exhibited superior performance, characterized by a linear response in the nitrate concentration range of 1.0 x 10-5 to 1.0 x 10-1 M, with a high coefficient of determination (R2 = 0.9971) and a slope of -53.1 +/- 1.4 mV dec-1. The electrode also achieved a limit of detection of 7.5 x 10-6 M. These findings highlight the potential of molecular cages as ionophores for nitrate sensing in environmental applications.Article Citation - WoS: 4Citation - Scopus: 4Tailored Bodipy-Based Fluorogenic Probes for Phosgene Detection: a Comparative Evaluation of Recognition Sites(Royal Soc Chemistry, 2024) Dartar, Suay; Kaya, Beraat Umur; Yayak, Yanki Oncu; Vural, Ezgi; Emrullahoglu, MustafaWe constructed two novel boron-dipyrromethene (BODIPY)-based fluorescent probes, BOPD and BOBA, each equipped with the phosgene specific recognition units o-phenylenediamine (OPD) and o-aminobenzylamine (OBA) at the 2-position of the BODIPY core. BOPD and BOBA represent rare examples of BODIPY-based probes that operate by modulating an intramolecular charge transfer process (ICT), as validated by computational studies. We systematically compared the analytic performance of those recognition units while focusing on selectivity, fluorescence turn-on ratios and response times. Probe BOBA, equipped with OBA as the recognition unit, demonstrated a remarkably low detection limit (i.e., 1.40 nM) and a rapid response time (<10 s) for triphosgene. By comparison, BOPD, featuring an OPD unit, showed superior selectivity towards triphosgene, with a detection limit of 93 nM and a response time of up to 30 s. A portable sensing platform was developed by loading BOPD onto test strips made of TLC plates, nonwoven materials and small-headed cotton swabs, which were assessed for their effectiveness in detecting phosgene. We additionally performed the first successful application of a fluorescent probe, namely BOPD, for monitoring the accumulation of phosgene in plants.Article Citation - WoS: 2Citation - Scopus: 2Stabilization of the First-Order Phase Transition Character and Enhancement of the Electrocaloric Effect by Na<sub>0.5</Sub>bi<sub>0.5< Substitution in Batio<sub>3</Sub> Ceramics(Royal Soc Chemistry, 2024) Karakaya, Merve; Gurbuz, Irem; Fulanovic, Lovro; Adem, UmutThe electrocaloric properties of BaTiO3-based Pb-free ferroelectric materials are widely investigated. One approach to achieving a large electrocaloric response is making use of the substantial polarization change associated with the first-order phase transition at the Curie temperature. To make use of this approach, we have investigated the electrocaloric response of (1 - x)BaTiO3-xNa0.5Bi0.5TiO3 (BT-NBT) ceramics for x = 0.05, 0.10, 0.20 and 0.30. For this BT-rich part of the solid solution, it is established that increasing the NBT content increases the tetragonality of the BaTiO3. We show that this increase in tetragonality with NBT substitution helps to maintain the first-order nature of the phase transition in BaTiO3 and correspondingly a large electrocaloric response, despite the simultaneous enhancement of relaxor ferroelectric character with the NBT substitution. A significantly larger effective electrocaloric temperature change (Delta Teff) of 1.65 K was obtained for the x = 0.20 sample under 40 kV cm-1, using the direct measurement of the electrocaloric effect, which is in reasonable agreement with the indirect measurements.Article Citation - WoS: 1Citation - Scopus: 2Concurrent Boron Removal From Reverse Osmosis Concentrate and Energy Production Using a Microbial Desalination Cell-Donnan Dialysis Hybrid System(Royal Soc Chemistry, 2024) Goren, A. Yagmur; Okten, H. EserThe removal of boron from aqueous solutions offers an important opportunity to improve the management of sustainable resources. In this regard, microbial desalination cells (MDCs) are a promising bioelectrochemical approach for effective water treatment, but the integrated MDC-Donnan Dialysis (DD) process for boron removal from reverse osmosis (RO) concentrated effluents has not been investigated before. Integration of the DD process with MDC is investigated in this paper for the first time to enhance the efficiency of the process by providing pre-treatment and natural pH manipulation. Therefore, the MDC process was evaluated for boron removal from boron-containing synthetic solution, geothermal water, and RO-concentrated effluent with the help of the DD system. The highest boron removal performance, with an efficiency of 72.1% in the desalination chamber and 74.8% in the DD-feed chamber, was obtained for boron-containing synthetic solution, while the COD removal efficiency was almost 90% in all water resources. However, the maximum power density was 4818 mW m-2 with a closed circuit voltage of 1317 mV for RO concentrated water treatment due to its high ionic strength. Moreover, the most crucial output of this study is that the pH value of the system did not need to be adjusted continuously to convert the uncharged boric acid into the borate ion in the charged form owing to better manipulation of the pH by the DD system. Overall, the integrated MDC-DD system provided promising results, presenting effective boron-containing water desalination, yeast wastewater treatment, and enhanced energy production.Review Citation - WoS: 10Citation - Scopus: 12Trends in Authentication of Edible Oils Using Vibrational Spectroscopic Techniques(Royal Soc Chemistry, 2024) Ozen, Banu; Cavdaroglu, Cagri; Tokatli, FigenThe authentication of edible oils has become increasingly important for ensuring product quality, safety, and compliance with regulatory standards. Some prevalent authenticity issues found in edible oils include blending expensive oils with cheaper substitutes or lower-grade oils, incorrect labeling regarding the oil's source or type, and falsely stating the oil's origin. Vibrational spectroscopy techniques, such as infrared (IR) and Raman spectroscopy, have emerged as effective tools for rapidly and non-destructively analyzing edible oils. This review paper offers a comprehensive overview of recent advancements in using vibrational spectroscopy for authenticating edible oils. The fundamental principles underlying vibrational spectroscopy are introduced and chemometric approaches that enhance the accuracy and reliability of edible oil authentication are summarized. Recent research trends highlighted in the review include authenticating newly introduced oils, identifying oils based on their specific origins, adopting handheld/portable spectrometers and hyperspectral imaging, and integrating modern data handling techniques into the use of vibrational spectroscopic techniques for edible oil authentication. Overall, this review provides insights into the current state-of-the-art techniques and prospects for utilizing vibrational spectroscopy in the authentication of edible oils, thereby facilitating quality control and consumer protection in the food industry. The authentication of edible oils has become increasingly important for ensuring product quality, safety, and compliance with regulatory standards.