Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
15 results
Search Results
Now showing 1 - 10 of 15
Article Citation - WoS: 7Citation - Scopus: 8Update for Reactive Transport Modeling of the Kızıldere Geothermal Field To Reduce Uncertainties in the Early Inspections(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2023) Erol, Selçuk; Akın, Taylan; Akın, SerhatThe development of carbon capture and storage techniques has become essential to reduce and mitigating CO2 emissions to the atmosphere. CarbFix1 and CarbFix2 projects carried out in Iceland demonstrated that the emissions of waste CO2 gas from geothermal power plants can be captured and mixed with the effluent geofluid and subsequently injected back into the geothermal reservoir. This experience gained in the CarbFix projects expanded into other geothermal fields around Europe, and one of the demonstration sites is the geothermal field in Turkey, Kızıldere. This paper focuses on the results of an updated study on early field evaluations with reactive transport simulations. In the new three-dimensional numerical model, the geological formations and fault zones were updated according to the well-logs data. Based on the tracer tests performed in the field, the anisotropic permeabilities between the wells were evaluated and imposed into the model. Geofluid chemistry, mineral components, and the volume fractions used as input in the simulations are modified depending on the performed laboratory experiments on the metamorphic schists taken from the geothermal site (i.e. X-ray diffraction (XRD), energy dispersive X-ray (EDX), scanning-electron microscope (SEM), and batch reactor tests). Different thermodynamic databases such as Lawrance Livermore National Laboratory (LLNL) and Thermoddem databases were tested using PHREEQC and TOUGHREACT programs for consistency with experiments. The thermodynamic conditions and the geofluid-rock-CO2 interactions prevent the mineralization of CO2 in the reservoir. This outcome differs from CarbFix projects in terms of the carbonization process, but the CO2 injection is still reliable with solubility-trapping in a geothermal reservoir to partially mitigate the emission. Roughly, 200 kt of CO2 in 10 years can be safely injected into the geothermal reservoir. According to the new analysis, the ratio of magnesium, sodium, and potassium varies in solid solution series of feldspars and clay minerals as albite end-member and montmorillonite/illite end-members, respectively. The evaluations of solid solution reactions are relatively limited in the law of mass action approach used by PHREEQC and TOUGHREACT. © TÜBİTAK.Article Citation - WoS: 2Citation - Scopus: 1Dynamics of Co2 Consumption, and Biomass and Lipid Carbon Production During Photobioreactor Cultivation of the Diatom Cyclotella(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2023) Ökten, HaticeUnderstanding of CO2 delivery and consumption dynamics in algal photobioreactors are critical to unravel microalgae’s full potential for bioproduct generation and carbon capture from flue gas streams. This study aims to expand our current understanding by cultivating the diatom Cyclotella under controlled process conditions of a bubble column photobioreactor and analyzing CO2 consumption dynamics in real time using results from an online CO2 sensor connected to the reactor exhaust. Two sets of experiments were conducted: they served to contrast the influence of silicon and nitrate (Si&N colimitation) and Si limitation, and the light availability, respectively. CO2 consumption was calculated based on the mass balance around the reactor inlet and outlet gas streams. Biomass samples and lipid extracts were analyzed for carbon (C) content to determine biomass-C and lipid-C concentrations. The outlet CO2 concentrations varied significantly with cultivation time and process conditions. More than 15% to 65% of the CO2 introduced left the reactor in the exhaust at any instance based on the set CO2 transfer rates. The highest average daily capturing efficiency was 60%. Nutrient limitation regimes imposed generated unique CO2 consumption profiles undiscernible by the biomass-C analysis, i.e. unlike Si limitation, N limitation had more immediate detrimental effects on C consumption. Final biomass-C concentration increased with increasing N and light availability, 275 mg/L vs. 336 mg/L, and 270 mg/L vs. 501 mg/L, respectively. Biomass-C based capturing efficiency approximations resulted in 20% to 40% underestimation. Under Si-limited conditions, the higher light intensity increased the final lipid-C to biomass-C ratio by two times (from 20% to 40%) and the final lipid-C concentration and peak productivity by four times (from 56 mg/L to 216 mg/L, from 7 to 30 mg/L-day, respectively). This study demonstrates online exhaust CO2 concentration-based analysis’s unique capabilities for assessing carbon availability and capture, organic-C production, and its diversion to biomass and lipid production.Article Citation - WoS: 4Citation - Scopus: 5Co2 Absorption Into Primary and Secondary Amine Aqueous Solutions With and Without Copper Ions in a Bubble Column(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2022) Yousefzadeh, Hamed; Güler, Cansu; Erkey, Can; Uzunlar, ErdalChemical absorption of CO2 into aqueous amine solutions using a nonstirred bubble column was experimentally investigated. The performance of CO2 absorption of four different primary and secondary amines including monoethanolamine (MEA), piperazine (PZ), 2-piperidineethanol (2PE), and homopiperazine (HPZ) were compared. The effects of initial concentration of amine, the inlet mole fraction of CO2, and solution temperature on the rate of CO2 absorption and CO2 loading (mol CO2/mol amine) were studied in the range of 0.02–1 M, 0.10–0.15, and 25–40 °C, respectively. The effect of the presence of copper ions in the amine solution on CO2 loading was also studied. By comparison of the breakthrough curves of the amines at different operational conditions, it was revealed that the shortest and longest time for the appearance of the breakthrough point was observed for MEA and HPZ solutions, respectively. CO2 loading of MEA, 2PE, PZ, and HPZ aqueous solutions at 25 °C, 0.2 M of initial concentration of amine, and 0.15 of inlet mole fraction of CO2 were 1.06, 1.14, 1.13, and 1.18 mol CO2/mol amine, respectively. By decreasing the inlet mole fraction of CO2 from 0.15 to 0.10, CO2 loading slightly decreased. As the initial concentration of amine and temperature decreased, CO2 loading increased. Also, the presence of copper ions in the absorbent solution resulted in a decrease in the CO2 loading of MEA and HPZ aqueous solutions. In case of PZ and 2PE amines, adding copper ions led to precipitation even at low copper ion concentrations.Article Citation - WoS: 29Citation - Scopus: 40Geothermal Resources for Sustainable Development: a Case Study(Wiley, 2022) Baba, Alper; Chandrasekharam, DornadulaTurkey's primary energy source is fossil fuels, with a contribution of 55%. According to the International Energy Agency forecast, fossil fuels will continue to be the primary energy source for the next decade. The current CO2 emissions from fossil fuel-based energy are 400 Mt. If the present energy usage trend continues, then the emissions will cross 500 Mt by 2030. However, Turkey has large scope to mitigate climate-related issues and follow sustainable development agenda by increasing the share of geothermal energy as a primary energy source mix. The country established a strong geothermal energy program in 1984 by installing a 17 MWe geothermal power plant in Kızıldere and made tremendous progress in this field. Currently, the power generation has crossed 1665 MWe. Turkey has drawn a new road map to enhance its primary energy source mix by developing its radiogenic granites (Enhanced Geothermal Systems) for power generation and carbon dioxide capture programs. This is an emerging technology that is being recommended for Turkey. Currently, France, Australia, and the United Kingdom are surging ahead in implementing Enhanced Geothermal Systems (EGS), and France has established a pilot power plant using EGS and generating 10 MWe. The United Kingdom will be starting its 3 MWe power plant. The hydrothermal source, in combination with Enhanced Geothermal Systems, can contain the annual CO2 emissions to 500 Mt and reduce the per-capita CO2 emissions to 4.5 tons annually. One of the greatest contributions to climate mitigation and sustainable development made by the geothermal industry is the sequestration of CO2 from the Kızıldere geothermal power plant for the manufacturıng of dry ice and use CO2 from the Tuzla geothermal power plant for minimizing scaling. This dry ice technology can be extended to the cement industry to capture 18 billion CO2 being emitted annually from clinker manufacturıng units. The dry ice will be useful in combating forest fires that are common in Turkey. The article discusses the new technological developments that Turkey is adopting to mitigate climate change and achieve sustainable development goals.Article Citation - WoS: 59Citation - Scopus: 67Design and Thermodynamic Analysis of a Novel Methanol, Hydrogen, and Power Trigeneration System Based on Renewable Energy and Flue Gas Carbon Dioxide(Pergamon-Elsevier Science LTD, 2021) Nazerifard, Reza; Khani, Leyla; Mohammadpourfard, Mousa; Mohammadi-Ivatloo, Behnam; Gökçen Akkurt, GüldenIn this paper, a new trigeneration system is proposed to decrease atmospheric carbon dioxide emission and produce methanol, hydrogen, and power. The system is composed of an organic Rankine cycle, a direct methanol fuel cell, a carbon capture unit, a proton exchange membrane electrolyzer, and a methanol synthesis unit. A flue gas stream with a defined composition, solar energy, and the atmospheric air are the system?s inlets. In the design step, special attention is paid to heat and mass integration between different components so that its waste can be lowered as much as possible. Then, mass balance law, energy conservation principle, exergy relations, and auxiliary equations are applied for each subsystem to investigate the system's thermodynamic performance. Also, the effect of changing operating parameters on the performance of each subsystem is studied. The obtained results show that the proposed system has the energy and exergy efficiencies of 66.84% and 55.10%, respectively. Furthermore, 94% of the total exergy destruction rate belongs to the water electrolyzer, while the contribution of the organic Rankine cycle is negligible. The performance of the methanol synthesis reactor depends strongly on its inlet temperature. Maximum equilibrium methanol concentration and carbon dioxide conversion are achieved at the inlet temperature of 210 degrees C. The parametric studies reveal that there is an optimum fuel cell current density in which its produced power density is maximized.Article Citation - WoS: 27Citation - Scopus: 31Fluoroacrylate-Aromatic Acrylate Copolymers for Viscosity Enhancement of Carbon Dioxide(Elsevier Ltd., 2019) Kılıç, Sevgi; Enick, Robert M.; Beckman, Eric J.The effect of the structure of aromatic acrylate-fluoroacrylate copolymers on CO2 viscosity at elevated pressures was investigated. These copolymers were all found to be miscible with CO2 at pressures between 10-15 MPa (295 K) and induce an increase in the viscosity to some degree. It appears that stacking of aromatic rings is the key factor in viscosity enhancement. The results showed that viscosity of the solution increases with the increasing content of the aromatic acrylate unit in the copolymer, but a point is reached beyond which additional comonomer causes the relative viscosity to drop, suggesting that the aromatic rings associate through intramolecular rather than intermolecular interactions beyond the optimum value. The most effective CO2 thickener identified in this study was the 29% phenyl acrylate-71% fluoroacrylate copolymer. However, the presence of a spacer (methyl or ethyl) between the backbone and the aromatic group substantially diminished the viscosity enhancement.Article Determination of the Effects of Biomaterials on Human Peripheral Blood Mononuclear Cells (pbmc)(IOS Press, 2002) Sudağıdan, Mert; Güneş, Hatice; Harsa, ŞebnemArticle Citation - WoS: 3Citation - Scopus: 5Adsorption Characteristics of Lead-, Barium- and Hydrogen-Rich Clinoptilolite Mineral(SAGE Publications Inc., 2003) Çakıcıoğlu Özkan, Seher Fehime; Ülkü, SemraThe carbon dioxide and water vapour adsorption properties of local clinoptilolite-rich material, both as the original and as lead-, barium- and hydrogen-rich forms, were examined. The lead- and barium-rich forms were prepared by treatment of the original clinoptilolite with Pb(NO3)2 and BaCl2 respectively, while the hydrogen-rich form was prepared by NH4Cl and heat treatment. Water and CO2 adsorption experiments were conducted in a volumetric system under static conditions, with low-pressure adsorption data being used for the characterization of the natural, Pb-rich, Ba-rich and H-rich clinoptilolite samples. Although the existence of barium-exchange was not noted, an appreciable decrease in CO2 adsorption was observed with the Pb-rich and H-rich forms due to a decrease in the electrostatic interaction between the surface and the adsorbate. Application of the Dubinin-Astakhov equation to the water adsorption data established the existence of micropores of different sizes that exhibited different adsorption mechanisms.Article Citation - WoS: 12Citation - Scopus: 15Assessment and Improvement of Indoor Environmental Quality in a Primary School(Taylor and Francis Ltd., 2017) Ekren, Orhan; Karadeniz, Ziya Haktan; Atmaca, İbrahim; Ugranlı Çiçek, Tuğba; Sofuoğlu, Sait Cemil; Toksoy, MacitThis study reports levels of indoor environmental quality variables before and after installation of heat recovery ventilation in a primary school located in an urban area in Izmir, Turkey. A CO2-based modeling was performed to determine the required flow rates that would comply with an international ventilation standard, followed by computational fluid dynamics modeling for best airflow distribution in a classroom. Temperature, CO2, PM2.5, and total volatile organic compounds were found at undesired levels, among which relative humidity, CO2, and PM2.5 were improved after the intervention. Reductions in the mean and maximum concentrations were 29% and 68% for CO2 and 29% and 46% for PM2.5. This intervention study was a part of the city-wide main project that aimed to increase awareness of the students and their families, teachers, and staff regarding importance of indoor environmental quality in both at school and home due to its possible effects on children's health and academic performance, one of the major challenges of today's societies all around the globe.Article Citation - WoS: 23Citation - Scopus: 29Dynamic Nature of Supercritical Co2 Adsorption on Coals(Springer Verlag, 2017) Özdemir, EkremAdsorption on non-rigid solids was shown to be a dynamic process. Excess adsorption and desorption isotherms of CO2 on eight Argonne Premium coal samples were measured at 55 °C and pressures up to 14 MPa by manometric method. The excess adsorption isotherms of CO2 on powdered coals showed almost Langmuir-like to rectilinear shape behavior at low pressures up to 9 MPa, and it increased noticeably at pressures higher than 9 MPa. There was a significant hysteresis between the excess adsorption and desorption isotherms for each rank of coals, which was related to the volumetric uncertainties occurring during the adsorption isotherm measurements. The parameters related to the adsorption capacity and micro porous characteristics of the coal were obtained at different pressure ranges by fitting the experimental data to the modified Dubinin-Astakhov (D-A) equation at the increasingly larger pressure ranges, using only the first 4 data points of the excess adsorption isotherm initially, and progressively using additional data points for the subsequent values. It was shown that the curve fit parameters vary with pressure, and therefore, concluded that the adsorption on non-rigid solids such as CO2 on coal is indeed a dynamic process. It was suggested that new adsorption isotherm equations need to be developed considering the dynamic nature of the adsorption on solid adsorbents.