Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 1Citation - Scopus: 1Petrogenesis and Comprehensive Thermal Assessment of the Dikili-Bergama Region, Western Anatolia(Pergamon-elsevier Science Ltd, 2025) Ayzit, Tolga; Erol, Selcuk; Baba, AlperVarious methods are available to evaluate the thermal properties and energy potential of geothermal fields. The heat flow method is crucial for thermal modeling and understanding geological evolution. It helps to assess the impact of geological formations on various processes, including hydrocarbon generation and structural modeling. This study focuses on the Dikili-Bergama geothermal region and presents heat flow trends based on thermal modeling. The analysis of volcanic rock petrogenesis data and a thermal model are presented based on data from deep and shallow boreholes. The geothermal gradient is found to vary between 66.28 degrees C km-1 and 121.68 degrees C km-1, according to the interpolated data. Additionally, the study investigates the geochemical and lithological properties of magmatic rocks in the Dikili-Bergama region. The Kozak pluton group's has been measured to have radioactive heat production of up to 7.4 mu Wm-3. Thermal conductivity properties and correlations, along with heat flow assessment, contribute to the understanding of geothermal potential. The mean dry thermal conductivity of the rocks in the study area is 2.33 Wm-1K-1. The data for the terrestrial heat flow and the radioactive heat flow values are up to 200 mWm-2. The integration of 3D geological models and thermal models has highlighted the south western area of the study as a promising location for unconventional geothermal operations.Article Citation - WoS: 1Citation - Scopus: 1Properties of Roman Structural Mortars in the Province of Asia (turkey)(Elsevier Sci Ltd, 2025) Tasci, Burcu; Boke, HasanIn this study, the properties of Roman structural mortars composed of lime and natural aggregates from twentythree archaeological sites in Western Anatolia were determined in order to understand whether there was a common production technology of lime mortars in the Roman Empire by making a comparison between Europe and Western Anatolia. Their basic physical and mechanical properties, raw material compositions, microstructural and hydraulic properties, mineralogical and chemical compositions of their lime binder and fine aggregates were identified by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy coupled with energy dispersive spectroscopy, thermal gravimetric analysis analyses, bulk density, total porosity and compressive strength of mortars. The results indicated that these mortars mortars were produced by combining fat or lean lime with coarse aggregates (quartz, tuff) and predominantly fine pozzolanic rhyolitic and dacitic tuff aggregates. The lime/aggregate ratios of the mortars generally exhibited a range of values between 1:4 and 1.5:1 by weight, which closely paralleled the lime/aggregate ratios in other Roman mortars published in literature. The presence of lime lumps within the mortar matrices, exhibiting a spongy texture, may suggest the use of the hot lime mixing method in the preparation of the mortars. The mortars are hydraulic, possessing compressive strengths comparable to those observed in natural hydraulic lime mortars (NHL2, NHL3.5 and NHL5 types). The results indicate that the production of structural mortars in the province of Asia was similar to that in other regions of the Roman Empire, although the raw materials are similar, small differences in raw material composition could be due to the use of local raw material sources. This may be evidence of a common lime mortar technology that deliberately used pozzolanic aggregates with almost pure lime throughout the Roman Empire.Article Art and Construction Related Qualities of 14th‒15th Century Monuments in a Rural Landscape on the Western Coast of Türkiye(KeAi Communications Co., 2024) Hamamcıoğlu Turan, Mine; Aktaş, Engin; Toköz, Özge DenizThis study aims to contribute to the understanding of the evolution of art and construction in the early settlements established by Turkish communities on the far west Asian coast by focusing on two developed examples in Urla Peninsula. Conventional surveying and evaluation techniques of architectural restoration and civil engineering were utilized. Key findings include the understanding of the hierarchy of rural settlements in the studied landscape: old Çesme the most developed village of peninsula in the 16th century. It was positioned along a valley in distance to coast, but in control of harbor that played significant role in commerce between Europe and Asia. Its mosque and tomb, dated to late 14th – early 15th centuries, used to crown it. Cylindrical minaret tower of mosque, domed tomb tower on a cubical base and squinch in the transition zone of mosque are evidences for Central Asian roots. Usage of local lime stone, re-usage of andesite blocks, framing of the stone blocks with bricks, and pendentive in tomb refer to Roman-Byzantine constructions. The study presents the development of Turkish art and construction on the far west Asian coast in the 14th‒15th centuries. Findings will be a guide for related conservation management in similar contexts. © 2024 The Author(s)Article Citation - WoS: 19Citation - Scopus: 20Execution Technique and Pigment Characteristics of Byzantine Wall Paintings of Anaia Church in Western Anatolia(Elsevier Ltd., 2018) Demir, Serap; Şerifaki, Kerem; Böke, HasanIn this study, material characteristics of wall paintings executed in 11th Century Byzantine Church located in archaeological site of Anaia (Turkey) were investigated to provide historical information of the painting techniques. For this purpose, physical, chemical and mineralogical compositions of the paintings were determined by X-Ray Diffraction, Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy coupled with Energy Dispersive spectroscopy and Thermo-Gravimetric Analysis. Analysis results indicated that the paintings were executed using lime-secco technique. In this technique, pigments were mixed with lime and applied on a smooth plaster layer. Pigments used were mainly iron oxides for red, yellow and purple paintings, aluminosilicates such as celadonite for green paintings and lazurite for dark blue paintings.Conference Object Citation - WoS: 2Citation - Scopus: 2Arsenic in Groundwater in Western Anatolia, Turkey: a Review(University of Silesia Press, 2010) Gündüz, Orhan; Baba, Alper; Elpit, HandanOccurrence of arsenic (As) in groundwater has been a major problem worldwide for the last hundred years. Considering its toxic effects on human health, the presence of elevated levels of arsenic in groundwater resources used in drinking water supply has been an active research field throughout the world (Van Halem et al., 2009). In this regard, case studies from Bangla-desh, India, Nepal, El Salvador, Ecuador, Honduras, Mexico, Chile, China, Canada, Argentina, Peru, Taiwan, United States, Bolivia and Turkey have been documented with regards to the detection of natural levels in groundwater, the occurrence and distribution mechanisms, the human health effects and the in-situ and ex-situ treatment techniques (Jean et al., 2010). In many of these locations, arsenic is naturally found in the subsurface strata within volcanic and sedimentary formations as well as in areas of geothermal systems related to tectonic activity. Western Anatolia in Turkey is one such area of complex geology with active tectonics and high geothermal potential. This natural setting serves as a suitable environment for the presence of high levels of arsenic in subsurface waters. Based on these fundamentals, this study presents a general overview of arsenic presence in western Anatolia.Conference Object Occurrence of Arsenic and Related Microbial Signature of Hydrothermal Systems in Western Turkey(Taylor & Francis, 2012) Chen, Chienyen; Maity, Jyoti Prakash; Bundschuh, Jochen; Bhattacharya, Prosun; Baba, Alper; Gündüz, OrhanThe naturally occurring aqueous Arsenic (As) and other toxic elements are found around the world. The present study concentrates on arsenic concentrations, speciation and related microbial diversity in a hydrothermal system in Western Turkey. The surface temperatures of hot springs reach up to 90°C and deep well (reservoir) temperatures vary in the range of 40 to 230°C. The elements such as As, B, Br, Ba, Cr, Fe, Mn, V and Zn are found in high concentration in hydrothermal waters. Hydrogeochemically, Seferihisar hot spring exhibited a Na-Cl water type. On the other hand, Karahayit, Pamukkale, Emirfaki, Alaşehir and Sart exhibit a Ca-HCO 3 water type and Çitgöl exhibited a Na-HCO 3-SO 4 water type. The arsenic (As) concentrations in geothermal waters of Western Anatolia have been detected to range from 0.03 mg/L to 1.5 mg/L, including Buharkent (İnalti) (1.50 ± 0.005 mg/L), Kizildere (1.13 ± 0.005 mg/L), Eynal (0.71 ± 0.005 mg/L) and Sarayköy (0.06 ± 0.004 mg/L). Arsenic (III) is the dominant species in geothermal water of Western Anatolia. The 16S rRNA gene sequences of bacterial diversity show that the thermophilic, sulfur/thiosulfate-oxidizing bacterium (Thiobacter subterraneus) is present in Kula geothermal water and mesophilic sulfur- and thiosulfate-oxidizing Sulfurovum lithotrophicum bacterium occurs in Sarayköy geothermal spring. Also, Bacillus fumarioli, (a thermophilic, aerobic endospore forming bacterium growing on (NH 4) 2 SO 4, MgSO 4 and MnSO 4 at 50-55°C), Schlegelella thermodepolymerans and Methylocaldum szegediense are rich in geothermal water.