Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 11Citation - Scopus: 11Comparison of Uniform and Non-Uniform Pressure Approaches Used To Analyze an Adsorption Process in a Closed Type Adsorbent Bed(Springer Verlag, 2013) Gediz İliş, Gamze; Mobedi, Moghtada; Ülkü, SemraHeat and mass transfer in an annular adsorbent bed filled with silica gel particles is numerically analyzed by uniform and non-uniform pressure approaches. The study is performed for silica gel-water pair, particle radius from 0.025 to 1 mm and two bed radii of 10 and 40 mm. For uniform pressure approach, the energy equation for the bed and the mass transfer equation for the particle are solved. For non-uniform pressure approach, the continuity and Darcy equations due to the motion of water vapor in the bed are added, and four coupled partial differential equations are solved. The changes of the adsorbate concentration, pressure, and temperature in the bed throughout the adsorption process for both approaches are obtained and compared. The obtained results showed that the particle size plays an important role on the validity of uniform pressure approach. Due to the interparticle mass transfer resistance, there is a considerable difference between the results of the uniform pressure and non-uniform pressure approaches for the beds with small size of particles such as 0.025 mm.Article Citation - WoS: 23Citation - Scopus: 25A Dimensionless Analysis of Heat and Mass Transport in an Adsorber With Thin Fins; Uniform Pressure Approach(Elsevier Ltd., 2011) Gediz İliş, Gamze; Mobedi, Moghtada; Ülkü, SemraA numerical study on heat and mass transfer in an annular adsorbent bed assisted with radial fins for an isobaric adsorption process is performed. A uniform pressure approach is employed to determine the changes of temperature and adsorbate concentration profiles in the adsorbent bed. The governing equations which are heat transfer equation for the adsorbent bed, mass balance equation for the adsorbent particle, and conduction heat transfer equation for the thin fin are non-dimensionalized in order to reduce number of governing parameters. The number of governing parameters is reduced to four as Kutateladze number, thermal diffusivity ratio, dimensionless fin coefficient and dimensionless parameter of Γ which compares mass diffusion in the adsorbent particle to heat transfer through the adsorbent bed. Temperature and adsorbate concentration contours are plotted for different values of defined dimensionless parameters to discuss heat and mass transfer rate in the bed. The average dimensionless temperature and average adsorbate concentration throughout the adsorption process are also presented to compare heat and mass transfer rate of different cases. The values of dimensionless fin coefficient, Γ number and thermal diffusivity ratio are changed from 0.01 to 100, 1 to 10 -5 and 0.01 to 100, respectively; while the values of Kutateladze number are 1 and 100. The obtained results revealed that heat transfer rate in an adsorbent bed can be enhanced by the fin when the values of thermal diffusivity ratio and fin coefficient are low (i.e., α -=0.01, δ=0.01). Furthermore, the use of fin in an adsorbent bed with low values of γ number (i.e. γ=10 -5) does not increase heat transfer rate, significantly.Article Citation - WoS: 12Citation - Scopus: 11A Parametric Study on Isobaric Adsorption Process in a Closed Adsorbent Bed(Elsevier Ltd., 2010) Gediz İliş, Gamze; Mobedi, Moghtada; Ülkü, SemraA numerical study on heat and mass transfer in an annular adsorbent bed filled with adsorbent granules for an isobaric adsorption process is performed. In order to reduce the number of independent parameters that influences heat and mass transfer in the bed, the governing equations and related initial and boundary conditions for the problem are non-dimensionalized and this yields two dimensionless parameters as G and Γ. The G dimensionless parameter is the ratio of heat of adsorption to sensible heat stored by adsorbent particle and Γ parameter compares mass diffusion within the adsorbent particle and heat diffusion in the radial direction of the adsorbent bed. The obtained results show that the total dimensionless time for an adsorption process can be reduced by increasing of Γ value. The total dimensionless time is independent from G for low values of Γ (i.e. Γ=105). The results also show that the instantaneous equilibrium model can provide accurate results only for an adsorbent bed with a low value of Γ (i.e. Γ=105). The present study is performed for Γ values from 105 to 1 and G value from 1 to 100. © 2010 Elsevier Ltd.