Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 20Citation - Scopus: 21Long Term Stability of Biodegradable Polymers on Building Limestone(Elsevier Ltd., 2019) Kaplan, Zişan; Böke, Hasan; Sofuoğlu, Aysun; İpekoğlu, BaşakSynthetic polymers can be replaced by biodegradable ones as adhesives, water repellents and consolidants on the stone surfaces and facades of the historic buildings in their conservation to minimize future deterioration. In this study, the long-term stability of two biodegradable polymers, polyhydroxybutyrate (PHB) and poly-L-lactide (PLA), and an acrylic polymer (Paraloid B72) which is commonly used in conservation works of artefacts, were evaluated on limestone using a UV lamp-weathering chamber (up to 104 days) for future protection studies. Chemical and morphological changes induced by an accelerated weathering test were examined by Fourier Transform Infrared spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) analyses. Protection efficiency of the polymers was determined by the changes in color, capillary water absorption, static contact angle on limestone. Paraloid B72, PHB, and PLA coatings significantly increased hydrophobicity while decreasing capillarity water absorption and caused negligible change in the color of the limestone. Protection efficiencies of PLA and PHB polymers were almost the same as that of Paraloid B72, a widely used acrylic polymer. However, PLA and PHB seemed to be favorable polymers as protective agents due to their reversibility and biodegradability, low chromatic changes, good hydrophobic behavior and good stability to weathering in reducing the effects of outdoor exposure on limestone surfaces.Article Citation - WoS: 49Citation - Scopus: 57Characteristics of Lime Produced From Limestone Containing Diatoms(Elsevier Ltd., 2008) Böke, Hasan; Çizer, Özlem; İpekoğlu, Başak; Uğurlu Sağın, Elif; Şerifaki, Kerem; Toprak, GülcanIn this study lime binder used in stone and brick masonry mortars of some historic Ottoman baths was examined to understand whether the binders were hydraulic or not. For this purpose the mineralogical and elemental compositions and the microstructure of lime binder were determined by XRD, SEM-EDS and TGA analyses. The results indicate that the lime used in the brick dome mortars of Ottoman baths was hydraulic. Taking into account the kiln and fuel conditions of the 15th century, the possibility of obtaining hydraulic lime at relatively low temperature was examined. For this purpose limestone containing diatoms was heated at a relatively low temperature (850 °C), then slaked and carbonated. After heating and slaking, calcium silicate giving hydraulicity to the lime was indicated by XRD and SEM-EDS analyses. These results show that the production of hydraulic lime at a relatively low calcination temperature (850 °C) was possible with 15th century kilns.