Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
89 results
Search Results
Now showing 1 - 10 of 89
Article Anisotropic Tunability of Vibrational Modes in Black Phosphorus Under Uniaxial Compressive/Tensile Strain(Wiley, 2023) Li, Hao; Kutlu, Tayfun; Carrascoso, Felix; Şahin, Hasan; Munuera, Carmen; Castellanos Gomez, AndresStrain engineering is a powerful strategy for tuning the optical, electrical, vibrational properties of 2D nanomaterials. In this work, a four-point bending apparatus is constructed to apply both compressive and tensile strain on 2D anisotropic black phosphorus flake. Further polarized Raman spectroscopy is used to study the vibrational modes of black phosphorus flakes under uniaxial strain applied along various crystalline orientations. Here, a strong anisotropic blue/redshift of A1g, B2g, and A2g modes is found under compressive/tensile strain, respectively. Interestingly, mode A1g exhibits the maximum/minimum shift while mode B2g and mode A2g present the minimum/maximum shift when the strain is applied along armchair/zigzag direction. Density functional theory calculations are carried out to investigate the anisotropic strain response mechanism, finding that the strain-induced regulation of the PP bond angle, bond length, and especially interlayer interaction has a giant influence on the Raman shift. A four-point bending apparatus is constructed to study the effect of uniaxial strain on the vibrational property of anisotropic black phosphorus. Particularly, strong anisotropy on the Raman blueshift/redshift rate upon compressive/tensile strain can be observed, which results from the strain-induced regulation of the bond angle, bond length, and interlayer interactions according to density functional theory calculation analysis.imageArticle Citation - WoS: 1Citation - Scopus: 1Experimental and Theoretical Investigation of Synthesis and Properties of Dodecanethiol-Functionalized Mos<sub>2</Sub>(Royal Soc Chemistry, 2023) Duran, Tuna A.; Şahin, Hasan; Sabani, Denis; Milosevic, Milorad V.; Sahin, HasanHerein, we investigate the DDT (1-dodecanethiol) functionalization of exfoliated MoS2 by using experimental and theoretical tools. For the functionalization of MoS2, DDT treatment was incorporated into the conventional NMP (N-methyl pyrrolidone) exfoliation procedure. Afterward, it has been demonstrated that the functionalization process is successful through optical, morphological and theoretical analysis. The D, G and 2LA peaks seen in the Raman spectrum of exfoliated NMP-MoS2 particles, indicate the formation of graphitic species on MoS2 sheets. In addition, as the DDT ratio increases, the vacant sites on MoS2 sheets diminish. Moreover, at an optimized ratio of DDT-NMP, the maximum number of graphitic quantum dots (GQDs) is observed on MoS2 nanosheets. Specifically, the STEM and AFM data confirm that GQDs reside on the MoS2 nano-sheets and also that the particle size of the DDT-MoS2 is mostly fixed, while the NMP-MoS2 show many smaller and distributed sizes. The comparison of PL intensities of the NMP-MoS2 and DDT-MoS2 samples states a 10-fold increment is visible, and a 60-fold increment in NIR region photoluminescent properties. Moreover, our results lay out understanding and perceptions on the surface and edge chemistry of exfoliated MoS2 and open up more opportunities for MoS2 and GQD particles with broader applications.Article Citation - WoS: 1Citation - Scopus: 1A Multi-Layered Graphene Based Gas Sensor Platform for Discrimination of Volatile Organic Compounds Via Differential Intercalation(Royal Society of Chemistry, 2023) Özkendir İnanç, Dilce; Ng, Zhi Kai; Başkurt, Mehmet; Keleş, Berfin; Vardar, Gökay; Şahin, Hasan; Tsang, Siu Hon; Palaniappan, Alagappan; Yıldız, Ümit Hakan; Teo, EhtSelective and sensitive detection of volatile organic compounds (VOCs) is of critical importance for environmental monitoring, disease diagnosis and industrial applications. Among VOCs, assay development for primary alcohols has captured significant research attention since their toxicity causes adverse effects on gastrointestinal and central nerve systems, resulting in irreversible blindness, and coma, and can be even fatal at high exposure levels. However, selective detection of primary alcohols is extremely challenging owing to the similarity in their molecular structure and characteristic groups. Herein, we have attempted to investigate the differential methanol (MeOH)-ethanol (EtOH) discriminative properties of single-layer, bi-layer, and multi-layer graphene morphologies. Chemiresistors fabricated using the three morphologies of graphene illustrate discriminative MeOH-EtOH responses, which is attributed to the phenomenon of differential intercalation of MeOH within layered graphene morphologies as compared to that of EtOH. This hypothesis is verified by density functional theory calculations, which revealed that the adsorption of EtOH molecules on the graphene surface is more energetically favorable as compared to that of MeOH molecules, thereby inhibiting their intercalation within the layered graphene morphologies. It is further evaluated that the degree of MeOH intercalation increases with increasing layers of graphene for obtaining differential MeOH-EtOH responses. Experimental results suggest possibilities to develop selective and sensitive MeOH assays fabricated using various graphene morphologies in a combinatorial sensor array format.Article Citation - WoS: 3Citation - Scopus: 3Stable Single Layer Structures of Aluminum Oxide: Vibrational and Electronic Characterization of Magnetic Phases(Elsevier, 2022) Özyurt, A. Kutay; Molavali, Deniz; Şahin, HasanThe structural, magnetic, vibrational and electronic properties of single layer aluminum oxide (AlO2) are investigated by performing state-of-the-art first-principles calculations. Total energy optimization and phonon calculations reveal that aluminum oxide forms a distorted octahedral structure (1T′-AlO2) in its single layer limit. It is also shown that surfaces of 1T′-AlO2 display magnetic behavior originating from the O atoms. While the ferromagnetic (FM) state is the most favorable magnetic order for 1T′-AlO2, transformation to a dynamically stable antiferromagnetic (AFM) state upon a slight distortion in the crystal structure is also possible. It is also shown that Raman activities (350–400 cm−1) obtained from the vibrational spectrum can be utilized to distinguish the possible magnetic phases of the crystal structure. Electronically, both FM and the AFM phases are semiconductors with an indirect band gap and they can form a type-III vdW heterojunction with graphene-like ultra-thin materials. Moreover, it is predicted that presence of oxygen defects that inevitably occur during synthesis and production do not alter the magnetic state, even at high vacancy density. Apparently, ultra-thin 1T′-AlO2 with its stable crystal structure, semiconducting nature and robust magnetic state is a quite promising material for nanoscale device applications.Article Citation - WoS: 4Citation - Scopus: 4Identification of a Magnetic Phase Via a Raman Spectrum in Single-Layer Mnse: an Ab Initio Study(Elsevier, 2022) Yayak, Yankı Öncü; Şahin, Hasan; Yağmurcukardeş, MehmetMotivated by the recent experimental realization of single-layer two-dimensional MnSe [ACS Nano2021, 15, 13794-13802], structural, magnetic, elastic, vibrational, and electronic properties of single-layer MnSe are investigated by using density functional theory-based calculations. Among four different magnetic phases, namely, ferromagnetic (FM) and Nẽel-, zigzag-, and stripy-antiferromagnetic (AFM) phases, the Nẽel-AFM structure is found to be the energetically most favorable phase. Structural optimizations show the formation of in-plane anisotropy within the structures of zigzag- and stripy-AFM phases in single-layer MnSe. For the dynamically stable four magnetic phases, predicted Raman spectra reveal that each phase exhibits distinctive vibrational features and can be distinguished from each other. In addition, the elastic constants indicate the mechanical stability of each magnetic phase in single-layer MnSe and reveal the soft nature of each phase. Moreover, electronic band dispersion calculations show the indirect band gap semiconducting nature with varying electronic band gap energies for all magnetic phases. Furthermore, the atomic orbital-based density of states reveals the existence of out-of-plane orbitals dominating the top valence states in zigzag- and stripy-AFM phases, giving rise to the localized states. The stability of different magnetic phases and their distinct vibrational and electronic properties make single-layer MnSe a promising candidate for nanoelectronic and spintronic applications.Article Citation - WoS: 2Citation - Scopus: 5Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants(Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa MuammerAntimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.Article Citation - WoS: 2Citation - Scopus: 2Magnetic Single-Layer Nanoribbons of Manganese Oxide: Edge- and Width-Dependent Electronic Properties(Royal Society of Chemistry, 2022) Sözen, Yiğit; Topkıran, Uğur; Şahin, HasanIn the present work, the structural, magnetic, and electronic properties of the two- and one-dimensional honeycomb structures of recently synthesized MnO [Zhang et al., Hexagonal metal oxide monolayers derived from the metal-gas interface, Nat. Mater., 2021, 20, 1073-1078] are investigated by using first-principles calculations. Our calculations show that the single-layer 2D MnO crystal has a degenerate antiferromagnetic (AFM) ground state and a relatively less favorable ferromagnetic (FM) state. In addition, the magnetic anisotropy calculations unveil that the easy-axis direction for magnetism originating from unpaired electron states in manganese atoms is normal to the crystal plane. Electronically, while the FM MnO is a direct semiconductor with a narrow bandgap, AFM phases display large indirect bandgap semiconducting behavior. Moreover, the calculations on nanoribbons of MnO reveal that zigzag-edged ribbons display metallic behaviors, whereas armchair-edged nanoribbons are semiconductors. Magnetically, for both zigzag- or armchair-edged nanoribbons, the AFM order perpendicular to the nanoribbon growth direction is found to be favorable over the other AFM and FM orders. Moreover, depending on the edge symmetry and ribbon width, forbidden bandgap values of nanoribbons display distinct family behaviors.Article Citation - WoS: 6Citation - Scopus: 7Interface-Dependent Phononic and Optical Properties of Geo/Moso Heterostructures(Royal Society of Chemistry, 2022) Yağmurcukardeş, Mehmet; Sözen, Yiğit; Başkurt, Mehmet; Peeters, François M.; Şahin, HasanThe interface-dependent electronic, vibrational, piezoelectric, and optical properties of van der Waals heterobilayers, formed by buckled GeO (b-GeO) and Janus MoSO structures, are investigated by means of first-principles calculations. The electronic band dispersions show that O/Ge and S/O interface formations result in a type-II band alignment with direct and indirect band gaps, respectively. In contrast, O/O and S/Ge interfaces give rise to the formation of a type-I band alignment with an indirect band gap. By considering the Bethe-Salpeter equation (BSE) on top of G0W0 approximation, it is shown that different interfaces can be distinguished from each other by means of the optical absorption spectra as a consequence of the band alignments. Additionally, the low-and high-frequency regimes of the Raman spectra are also different for each interface type. The alignment of the individual dipoles, which is interface-dependent, either weakens or strengthens the net dipole of the heterobilayers and results in tunable piezoelectric coefficients. The results indicate that the possible heterobilayers of b-GeO/MoSO asymmetric structures possess various electronic, optical, and piezoelectric properties arising from the different interface formations and can be distinguished by means of various spectroscopic techniques.Article Citation - WoS: 13Citation - Scopus: 15Electronic and Magnetic Properties of Single-Layer Fecl2 With Defects(Amer Physical Soc, 2021) Ceyhan, Eray; Yağmurcukardeş, Mehmet; Peeters, François M.; Şahin, HasanThe formation of lattice defects and their effect on the electronic properties of single-layer FeCl2 are investigated by means of first-principles calculations. Among the vacancy defects, namely mono-, di-, and three-Cl vacancies and mono-Fe vacancy, the formation of mono-Cl vacancy is the most preferable. Comparison of two different antisite defects reveals that the formation of the Fe-antisite defect is energetically preferable to the Cl-antisite defect. While a single Cl vacancy leads to a 1 mu(B) decrease in the total magnetic moment of the host lattice, each Fe vacant site reduces the magnetic moment by 4 mu(B). However, adsorption of an excess Cl atom on the surface changes the electronic structure to a ferromagnetic metal or to a ferromagnetic semiconductor depending on the adsorption site without changing the ferromagnetic state of the host lattice. Both Cl-antisite and Fe-antisite defected domains change the magnetic moment of the host lattice by -1 mu(B) and +3 mu(B), respectively. The electronic ground state of defected structures reveals that (i) single-layer FeCl2 exhibits half-metallicity under the formation of vacancy and Cl-antisite defects; (ii) ferromagnetic metallicity is obtained when a single Cl atom is adsorbed on upper-Cl and Fe sites, respectively; and (iii) ferromagnetic semiconducting behavior is found when a Cl atom is adsorbed on a lower-Cl site or a Fe-antisite defect is formed. Simulated scanning electron microscope images show that atomic-scale identification of defect types is possible from their electronic charge density. Further investigation of the periodically Fe-defected structures reveals that the formation of the single-layer FeCl3 phase, which is a dynamically stable antiferromagnetic semiconductor, is possible. Our comprehensive analysis on defects in single-layer FeCl2 will complement forthcoming experimental observations.Article Citation - WoS: 17Citation - Scopus: 18Origin of Anomalous Band-Gap Bowing in Two-Dimensional Tin-Lead Mixed Perovskite Alloys(American Physical Society, 2021) Gao, Qiang; Şahin, Hasan; Kang, Jun; Wei, Su-HuaiThe origin of the pronounced and composition-dependent band-gap bowing in Sn/Pb mixed perovskite alloys has been under debate for a long time. Previous studies reported conflicting results on whether the chemical or structural effect is the dominant mechanism. In this paper, the band-gap bowing effect and its possible origins in recently synthesized two-dimensional (2D) Cs2PbxSn1-xI2Cl2 alloys are investigated from first-principles calculations. In agreement with experiments, a large and composition-dependent bowing coefficient is observed. By analyzing the contribution from volume deformation, charge exchange, structural relaxation, and short-range order, it is found that the dominant mechanism causing the anomalous gap bowing is the structural relaxation-induced wave-function localization, forming isovalent-defect-like states, despite the negligible octahedral distortion and small lattice mismatch between the two end compounds. This is understood by the s-p repulsion-induced strong antibonding character of the valence-band maximum which leads to a large deformation potential, thus even a small atomic displacement can result in a large shift of the energy level. These results thus highlight the critical role of strong deformation potential and structural relaxation effect in unusual band evolution of 2D Sn/Pb perovskite alloys, and can be helpful to the modulation of their band gap for optoelectronic applications.