Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 10Citation - Scopus: 10Morphology, Order, Light Transmittance, and Water Vapor Permeability of Aluminum-Coated Polypropylene Zeolite Composite Films(John Wiley and Sons Inc., 2011) Balköse, Devrim; Oğuz, Kaan; Özyüzer, Lütfi; Tarı, Süleyman; Arkış, Esen; Özmıhçı Ömürlü, FilizIn this study, the polypropylene-zeolite composite films having 2-6 wt % natural zeolite were coated with a thin film of aluminum (Al) by magnetron sputtering, and the contribution of the Al coating on film properties was investigated. The samples were characterized by EDX, X-ray diffraction, SEM, AFM, UV-visible spectroscopy, and water vapor permeation analyses. The surface of the films coated with a smooth Al film having 98-131 nm thickness. EDX revealed that Al percentage on the surface appeared to be as 8-10 wt % indicating contribution of polymer surface under Al film to analysis. XRD analysis showed that the grain size of Al at the surface was 22-29 nm. The surface roughness increased after Al-coating process. The transmission of coated films was very low for both UV and visible regions of the light spectrum. Permeation analysis indicated that water vapor permeation was lower for Al-coated material.Article Citation - WoS: 8Citation - Scopus: 5Tin Soaps in Emulsion Pvc Heat Stabilization(John Wiley and Sons Inc., 2002) Arkış, Esen; Balköse, DevrimIn this study, the effect of a liquid stabilizer based on organotins on PVC heat stability is investigated. Control and films with tin soap heat stabilizer Sn500K were prepared by solvent casting and they were heated at 160 and 180°C for different time periods. X-ray fluorescence spectroscopy analysis showed that tin was present in Sn500K and it was lead-free. DSC analysis showed that glass-transition temperature of films with Sn500K increased from 67 to 75-85°C by heating for 15 min at 180°C. IR spectroscopy indicated that concentration of carboxylate groups of Sn500K decreased with heating. Films with Sn500K did not degrade for short heating periods; however, degradation occurred in long heating times. Low concentration of Sn500K was recommended, since at high levels incompatibility with PVC and acceleration of degradation was observed. In the high temperature range, control and stabilized samples degraded in the same manner in two steps