Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 7Citation - Scopus: 7A Comprehensive Study on Burst Pressure Performance of Aluminum Liner for Hydrogen Storage Vessels(ASME, 2021) Kangal, Serkan; Sayı, Abdülmecit Harun; Ayakdaş, Ozan; Kartav, Osman; Aydın, Levent; Artem, Hatice Seçil; Aktaş, Engin; Yücetürk, Kutay; Tanoğlu, Metin; Kandemir, Sinan; Beylergil, BertanThis paper presents a comparative study on the burst pressure performance of aluminum (Al) liner for type-III composite overwrapped pressure vessels (COPVs). In the analysis, the vessels were loaded with increasing internal pressure up to the burst pressure level. In the analytical part of the study, the burst pressure of the cylindrical part was predicted based on the modified von Mises, Tresca, and average shear stress criterion (ASSC). In the numerical analysis, a finite element (FE) model was established in order to predict the behavior of the vessel as a function of increasing internal pressure and determine the final burst. The Al pressure vessels made of Al-6061-T6 alloy with a capacity of 5 L were designed. The manufacturing of the metallic vessels was purchased from a metal forming company. The experimental study was conducted by pressurizing the Al vessels until the burst failure occurred. The radial and axial strain behaviors were monitored at various locations on the vessels during loading. The results obtained through analytical, numerical, and experimental work were compared. The average experimental burst pressure of the vessels was found to be 279 bar. The experimental strain data were compared with the results of the FE analysis. The results indicated that the FE analysis and ASSC-based elastoplastic analytical approaches yielded the best predictions which are within 2.2% of the experimental burst failure values. It was also found that the elastic analysis underestimated the burst failure results; however, it was effective for determining the critical regions over the vessel structure. The strain behavior of the vessels obtained through experimental investigations was well correlated with those predicted through FE analysis.Article Citation - WoS: 3Citation - Scopus: 5Single- and Multiobjective Optimizations of Dimensionally Stable Composites Using Genetic Algorithms(Springer, 2021) Aydın, Levent; Artem, Hatice Seçil; Deveci, Hamza ArdaThe present study aims to design stacking sequences of dimensionally stable symmetric balanced laminated carbon/epoxy composites, with different numbers of layers, with a low coefficient of thermal expansion and high elastic moduli. To avoid excessive interlaminar stresses in the composites, the contiguity constraint for plies is also taken into consideration. In the design process, both single- and multiobjective optimization approaches, including genetic algorithms, are utilized. Results showed that stacking sequences ensuring lower thermal expansion coefficients and higher elastic moduli than those of traditional laminate designs can be obtained.Article Citation - WoS: 13Citation - Scopus: 17Design of Dimensionally Stable Composites Using Efficient Global Optimization Method(SAGE Publications Inc., 2019) Aydın, Levent; Aydın, Olgun; Artem, Hatice Seçil; Mert, AliDimensionally stable material design is an important issue for space structures such as space laser communication systems, telescopes, and satellites. Suitably designed composite materials for this purpose can meet the functional and structural requirements. In this paper, it is aimed to design the dimensionally stable laminated composites by using efficient global optimization method. For this purpose, the composite plate optimization problems have been solved for high stiffness and low coefficients of thermal and moisture expansion. Some of the results based on efficient global optimization solution have been verified by genetic algorithm, simulated annealing, and generalized pattern search solutions from the previous studies. The proposed optimization algorithm is also validated experimentally. After completing the design and optimization process, failure analysis of the optimized composites has been performed based on Tsai-Hill, Tsai-Wu, Hoffman, and Hashin-Rotem criteria.Article Citation - WoS: 32Citation - Scopus: 38Buckling Optimization of Composite Laminates Using a Hybrid Algorithm Under Puck Failure Criterion Constraint(SAGE Publications Inc., 2016) Deveci, Hamza Arda; Aydın, Levent; Artem, Hatice SeçilIn this study, an optimization procedure is proposed to find the optimum stacking sequence designs of laminated composite plates in different fiber angle domains for maximum buckling resistance. A hybrid algorithm combining genetic algorithm and trust region reflective algorithm is used in the optimization to obtain higher performance and improve the quality of solutions. As a novelty, Puck fiber and inter-fiber failure criteria are directly implemented to the optimization problems as nonlinear function constraints, which have allowed more consistent and feasible results. The performance of the hybrid algorithm is demonstrated by comparing with the individual performances of genetic and trust region reflective algorithms via test problems from the literature. Also, a study is performed to exhibit the effectiveness of the selected failure criterion as constraint among the other common criteria. The proposed procedure is used to solve many problems including various design considerations. The results indicate that reliable stacking sequence designs can be achieved in specific configurations even for the composite plates subjected to superior buckling loads when Puck physically based (3D) failure theory is considered as a first ply failure constraint in the buckling optimization.Article Citation - WoS: 19Citation - Scopus: 19Comparison of Stochastic Search Optimization Algorithms for the Laminated Composites Under Mechanical and Hygrothermal Loadings(SAGE Publications Inc., 2011) Aydın, Levent; Artem, Hatice SeçilThe aim of the present study is to design the stacking sequence of the laminated composites that have low coefficient of thermal expansion and high elastic moduli. In design process, multi-objective genetic algorithm optimization of the carbon fiber laminated composite plates is verified by single objective optimization approach using three different stochastic optimization methods: genetic algorithm, generalized pattern search, and simulated annealing. However, both the multi- and single-objective approaches to laminate optimization have been used by considerably few authors. Simplified micromechanics equations, classical lamination theory, and MATLAB Symbolic Math toolbox are used to obtain the fitness functions of the optimization problems. Stress distributions of the optimized composites are presented through the thickness of the laminates subjected to mechanical, thermal, and hygral loadings.Article Citation - WoS: 15Citation - Scopus: 19Exact Longitudinal Vibration Characteristics of Rods With Variable Cross-Sections(Hindawi Publishing Corporation, 2011) Yardımoğlu, Bülent; Aydın, LeventLongitudinal natural vibration frequencies of rods (or bars) with variable cross-sections are obtained from the exact solutions of differential equation of motion based on transformation method. For the rods having cross-section variations as power of the sinusoidal functions of ax+b, the differential equation is reduced to associated Legendre equation by using the appropriate transformations. Frequency equations of rods with certain cross-section area variations are found from the general solution of this equation for different boundary conditions. The present solutions are benchmarked by the solutions available in the literature for the special case of present cross-sectional variations. Moreover, the effects of cross-sectional area variations of rods on natural characteristics are studied with numerical examples.