Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

2014 - 20195

Settings

Author: search.filters.author.Demir, Mustafa MuammerWoS Q: search.filters.wosQuartile.N/A

Search Results

Now showing 1 - 5 of 5
  • Book Part
    Citation - Scopus: 1
    A Recycling Route of Plastics Via Electrospinning: From Daily Wastes To Functional Fibers
    (Walter de Gruyter GmbH, 2019) Isık, Tuğba; Horzum,N.; Demir, Mustafa Muammer
    Since large-scale plastic production has begun in the 1940s, plastics have been produced and used globally, bringing many advantages to modern life. The consumption of plastics has increased exponentially due to their low cost, chemical resistance, lightness, durability and ability to combine with other materials. However, plastic materials represent high tonnage in urban wastes, and it is known that these plastics discarded at the end of their useful life by filling the landfill sites. Electrospinning is a well-established and versatile technique for the fabrication of submicron fibers. In addition, it is a promising approach for the recycling of waste polymers without using complex methodologies. In this chapter, utilization of electrospinning approach for the recycling of daily wastes will be discussed. The literature about the daily wastes of both synthetic materials and natural/agricultural materials will be analyzed, and the applications of these materials will be given in detail. © 2019 Walter de Gruyter GmbH, Berlin/Boston. All rights reserved.
  • Book
    Citation - Scopus: 19
    Advanced Sensor and Detection Materials
    (John Wiley and Sons Inc., 2014) Tiwari, Ashutosh; Demir, Mustafa Muammer
    Presents a comprehensive and interdisciplinary review of the major cutting-edge technology research areas-especially those on new materials and methods as well as advanced structures and properties-for various sensor and detection devices. The development of sensors and detectors at macroscopic or nanometric scale is the driving force stimulating research in sensing materials and technology for accurate detection in solid, liquid, or gas phases; contact or non-contact configurations; or multiple sensing. The emphasis on reduced-scale detection techniques requires the use of new materials and methods. These techniques offer appealing perspectives given by spin crossover organic, inorganic, and composite materials that could be unique for sensor fabrication. The influence of the length, composition, and conformation structure of materials on their properties, and the possibility of adjusting sensing properties by doping or adding the side-groups, are indicative of the starting point of multifarious sensing. The role of intermolecular interactions, polymer and ordered phase formation, as well as behavior under pressure and magnetic and electric fields are also important facts for processing ultra-sensing materials. The 15 chapters written by senior researchers in Advanced Sensor and Detection Materials cover all these subjects and key features under three foci: 1) principals and perspectives, 2) new materials and methods, and 3) advanced structures and properties for various sensor devices. © 2014 Scrivener Publishing LLC. All rights reserved.
  • Conference Object
    Citation - Scopus: 3
    Investigation of Lithium Sorption Efficiency Using Swcnt Functionalized Electrospun Fiber Mats From the Hypersaline Geothermal Brine
    (Trans Tech Publications, 2018) Çelik, Aslı; Topçu, Gökhan; Isık, Tuğba; Baba, Alper; Horzum, Nesrin; Demir, Mustafa Muammer
    Geothermal mining from brines becomes increasingly important with the increasing demand for rare earth elements in various engineering applications. Geothermal fluids contain valuable minerals and metals such as silica, zinc, lithium, and other materials that can be processed to recover these products. Solution mining by nature is challenging because of variable composition as well as the concentration of the interfering ions, particularly calcium and magnesium, and the presence of interfering ions increases the recovery costs requiring additional steps. The aim of this study is the fabrication of single-walled carbon nanotube functionalized electrospun chitosan, poly(methyl methacrylate) (PMMA), and polyacrylonitrile (PAN) fiber mats. Effect of polymer type, dilution factor, and surface modification on the sorption of lithium (Li+) ions was investigated. The maximum sorption performance was obtained with SWCNT functionalized PAN (15 wt%) fiber mats and they have sorption percentage as 55% at diluted (1/100) brine samples.
  • Conference Object
    Citation - Scopus: 2
    Fabrication of Polymer Nanofiber-Conducting Polymer Fabric and Noncontact Motion Sensing Platform
    (Trans Tech Publications, 2018) Mutlu, Mustafa Umut; Akın, Osman; Demir, Mustafa Muammer; Yıldız, Ümit Hakan
    Conductive polymer-electrospun polymer nanofiber network was combined to host iron oxide nanoparticles providing micrometer thick sensing interface. The sensor has fabricated as freestanding fabric exhibiting 10 to 100 KOhm base resistivity upon bias applied. The moving object has been sensed through the electrostatic interactions between fibers and object. The sensing range has been found to be 1-5 cm above the surface of fabric. By the controlled combination of conductive polymers electrospun polymer nanofibers effective device miniaturization has been provided without loss of performance. The noncontact motion sensor platform has unique flexibility and light weight holding a potential for wearable sensor technology.
  • Conference Object
    Citation - WoS: 2
    Citation - Scopus: 4
    Monitoring Excimer Formation of Perylene Dye Molecules Within Pmma-Based Nanofiber Via Flim Method
    (SPIE, 2016) İnci, Mehmet Naci; Açıkgöz, Sabriye; Demir, Mustafa Muammer
    Confocal fluorescence lifetime imaging microscopy method is used to obtain individual fluorescence intensity and lifetime values of aromatic Perylene dye molecules encapsulated into PMMA based nanofibers. Fluorescence spectrum of aromatic hydrocarbon dye molecules, like perylene, depends on the concentration of dye molecules and these dye molecules display an excimeric emission band besides monomeric emission bands. Due to the dimension of a nanofiber is comparable to the monomer emission wavelength, the presence of nanofibers does not become effective on the decay rates of a single perylene molecule and its lifetime remains unchanged. When the concentration of perylene increases, molecular motion of the perylene molecule is restricted within nanofibers so that excimer emission arises from the partially overlapped conformation. As compared to free excimer emission of perylene, time-resolved experiments show that the fluorescence lifetime of excimer emission of perylene, which is encapsulated into NFs, gets shortened dramatically. Such a decrease in the lifetime is measured to be almost 50 percent, which indicates that the excimer emission of perylene molecules is more sensitive to change in the surrounding environment due to its longer wavelength. Fluorescence lifetime measurements are typically used to confirm the presence of excimers and to construct an excimer formation map of these dye molecules.