Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Now showing 1 - 7 of 7
Article Citation - WoS: 49Citation - Scopus: 52Advances in Electrospun Fiber-Based Flexible Nanogenerators for Wearable Applications(Wiley-VCH Verlag, 2021) Arıca, Tuğçe Aybüke; Isık, Tuğba; Güner, Tuğrul; Horzum, Nesrin; Demir, Mustafa M.In today's digital age, the need and interest in personal and portable electronics shows a dramatic growth trend in daily life parallel to the developments in sensors technologies and the internet. Wearable electronics that can be attached to clothing, accessories, and the human body are one of the most promising subfields. The energy requirement for the devices considering the reduction in device sizes and the necessity of being flexible and light, the existing batteries are insufficient and nanogenerators have been recognized a suitable energy source in the last decade. The mechanical energy created by the daily activities of the human body is an accessible and natural energy source for nanogenerators. Fiber-structured functional materials contribute to the increase in energy efficiency due to their effective surface to volume ratio while providing the necessary compatibility and comfort for the movements in daily life with its flexibility and lightness. Among the potential solutions, electrospinning stands out as a promising technique that can meet these requirements, allowing for simple, versatile, and continuous fabrication. Herein, wearable electronics and their future potential, electrospinning, and its place in energy applications are overviewed. Moreover, piezoelectric, triboelectric, and hybrid nanogenerators fabricated or associated with electrospun fibrous materials are presented.Article Citation - WoS: 36Citation - Scopus: 39Recent Developments of Colorimetric Mechanical Sensors Based on Polymer Composites(Royal Society of Chemistry, 2020) İnci, Ezgi; Topçu, Gökhan; Güner, Tuğrul; Demirkurt, Merve; Demir, Mustafa MuammerColorimetric mechanical (force, pressure, strain, and impact) sensors allow naked-eye visualization of existing structural deformations of a system occurring upon application of a mechanical action. The combination of mechanochromic materials with polymers offers a practical approach to designing and fabricating these sensors. Polymers as matrices can tolerate a wide range of forces and permits reusability of the sensors. On the other hand, mechanochromic materials provide unique colour properties depending on the type of mechanical action. They have also been frequently employed for the quantification of mechanical forces. As an example, non-centrosymmetric crystals are combined with polymers for sensing impact forces. Structures with photoluminescence and scattering and plasmonic resonances can be used to fabricate strain and pressure responsive composite materials, respectively. This study reviews recent advances in colorimetric mechanical sensor systems prepared using polymers and inorganic and organic mechanochromic materials working under a wide range of forces.Article Citation - WoS: 50Citation - Scopus: 58Chemically Modified Optical Fibers in Advanced Technology: an Overview(Elsevier, 2019) Shukla, S. K.; Kushwaha, Chandra Shekhar; Güner, Tuğrul; Demir, Mustafa MuammerIn recent years, chemically modified optical fibers have widely used for development of several advanced chemical and biosensors, biomedical technology and environmental monitoring. The chemically modified optical fiber bears several valuable properties like energy loss, catalytic behaviour, refractive index, and mechanical strength to advance the optical fiber technology. In this article, we reviewed the chemically-modified optical fiber and their applications in different optical fiber-based technologies. The basics of optical fiber and their modification are discussed along with the adopted methodologies. The advancements in different optical fiber based technologies viz sensing, imaging, tomography, magnetic resonance imaging, photodynamic therapy, optogenics, surgery and environmental monitoring are discussed in the light of the contribution of chemically modified optical fibers. In conclusion, success and challenges for the use of chemically modified-optical fiber are presented on the basis of existing literature.Article Citation - WoS: 25Citation - Scopus: 28Colorimetric and Plasmonic Pressure Sensors Based on Polyacrylamide/Au Nanoparticles(Elsevier, 2019) Topçu, Gökhan; Güner, Tuğrul; İnci, Ezgi; Demir, Mustafa MuammerColorimetric stimuli-responsive nanomaterials have emerged as an eminent tool for sensor applications. Among this class of sensing elements, gold nanoparticle-based (Au NP) nanostructures are promising materials due to their plasmonic features. In this study, free-standing flexible polymeric films having intense optical response upon application of mechanical pressure were fabricated based on polyacrylamide (PAAm) and Au NPs. Pressure may cause plasmonic shift most probably due to the disassembly of the clusters from blue to reddish individual particles depending on the extent of pressure. Temperature, time, and extent of pressure were examined in terms of spectral change of Au particles. The sensor films depict working range up to 160 MPa, which shows minor change at elevated temperatures probably due to the stress induced crystallization of PAAm. For practical applications, a simple red-green-blue (RGB) space-based algorithm was presented for smartphone-assisted detection of applied pressure. Moreover, the PAAm/Au composite structure shows self-healing without any additive under ambient conditions even after divided into pieces. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 18Citation - Scopus: 46Phosphor-Based White Led by Various Glassy Particles:control Over Luminous Efficiency(The Optical Society, 2019) Yüce, Hürriyet; Güner, Tuğrul; Balcı, Sinan; Demir, Mustafa MuammerGenerating white light through a mainstream remote phosphor design suffers from phosphor conversion efficiency loss due to a backscattering of light. Such a loss also reduces luminous efficiency of the resulting white light. To overcome this issue, various glassy scatterers with different morphologies such as glass bubbles, glass beads, and nanosized silica particles were employed as scatterers, together with a fixed amount of yellow phosphor (YAG:Ce3+) and a poly(dimethylsiloxane) (PDMS) matrix. In addition, the simulation of the system validates the rigorous multiple scattering of the incoming light most probably due to refractive index mismatch between the glass bubbles and surrounding PDMS matrix along with the internal reflections. (C) 2019 Optical Society of AmericaArticle Citation - WoS: 10Citation - Scopus: 12Statistical Approach To Tunneling Time in Attosecond Experiments(Academic Press Inc., 2017) Demir, Durmuş Ali; Güner, TuğrulTunneling, transport of particles through classically forbidden regions, is a pure quantum phenomenon. It governs numerous phenomena ranging from single-molecule electronics to donor–acceptor transition reactions. The main problem is the absence of a universal method to compute tunneling time. This problem has been attacked in various ways in the literature. Here, in the present work, we show that a statistical approach to the problem, motivated by the imaginary nature of time in the forbidden regions, lead to a novel tunneling time formula which is real and subluminal (in contrast to various known time definitions implying superluminal tunneling). In addition to this, we show explicitly that the entropic time formula is in good agreement with the tunneling time measurements in laser-driven He ionization. Moreover, it sets an accurate range for long-range electron transfer reactions. The entropic time formula is general enough to extend to the photon and phonon tunneling phenomena.Article Citation - WoS: 22Citation - Scopus: 25Null Extinction of Ceria@silica Hybrid Particles: Transparent Polystyrene Composites(American Chemical Society, 2015) İncel, Anıl; Güner, Tuğrul; Parlak, Onur; Demir, Mustafa MustafaScattering of light in optical materials, particularly in composites based on transparent polymer and inorganic pigment nanoparticles, is a chronic problem. It might originate mainly from light scattering because of a refractive index mismatch between the particles and transparent polymer matrix. Thus, the intensity of light is rapidly diminished and optical transparency is reduced. Refractive index matching between the pigment core and the surrounding transparent matrix using a secondary component at the interface (shell) has recently appeared as a promising approach to alter light scattering. Here, CeO2 (ceria) nanoparticles with a diameter of 25 nm are coated with a SiO2 (silica) shell with various thicknesses in a range of 6.5-67.5 nm using the Stöber method. When the hybrid core-shell particles are dispersed into transparent polystyrene (PS), the transmission of the freestanding PS composite films increases over both the ultraviolet (UV) and visible region as the shell thickness increases particularly at 37.5 nm. The increase of transmission can be attributed to the reduction in the scattering coefficient of the hybrid particles. On the other hand, the particles in tetrahydrofuran (THF) absorb over UV and the intensity of absorption shows a systematic decrease as the shell thickness increases. Thus, the silica shell suppresses not only the scattering coefficient but also the molar absorptivity of the core ceria particles. The experimental results regarding the target shell thickness to develop low extinction (scattering + absorption) composites show a qualitative agreement with the predictions of Effective Medium Theory.