Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Now showing 1 - 7 of 7
Article Citation - WoS: 4Citation - Scopus: 6Electrospinning of Fatty Acid-Based and Metal Incorporated Polymers for the Fabrication of Eco-Friendly Fibers(Wiley, 2022) Erdem, Çağlar; Isık, Tuğba; Horzum, Nesrin; Hazer, Baki; Demir, Mustafa MuammerAccumulation of plastic wastes occupies large space in gyres of the oceans called the 7th continent. This high-level concentration of toxic plastic wastes causes harmful consequences for marine life, therefore petroleum-originated plastics must be replaced (or at least partially) with natural resources. The environmental trends in material preparation promote the utilization of greener methods and materials when the limited primary sources are considered. Starting from the fatty acid macroperoxide initiators, synthesis of bio-based polymers using less commercial chemicals and stepwise green synthesis schemes could be possible in the near future. In this research, autoxidized vegetable oil initiators (castor, limonene, and soybean oil) containing metal nanoparticles (silver, platinum, and gold) are employed for free radical polymerization of vinyl monomers. The metal loaded and vegetable oil-based polymers are processed by electrospinning and end up with the successful fabrication of continuous fibers. Ag-loaded ricinoleic acid based polymers show notable antibacterial activity against Escherichia coli. This approach offers a remarkable minimization of the initiator consumption in the synthesis of such synthetic macromolecules as well as nanoparticle containing polymer composites while still maintaining the ease of processing. Transforming the obtained graft copolymers to electrospun nanofibers facilitates the use as support materials for antibacterial surfaces.Article Citation - WoS: 49Citation - Scopus: 52Advances in Electrospun Fiber-Based Flexible Nanogenerators for Wearable Applications(Wiley-VCH Verlag, 2021) Arıca, Tuğçe Aybüke; Isık, Tuğba; Güner, Tuğrul; Horzum, Nesrin; Demir, Mustafa M.In today's digital age, the need and interest in personal and portable electronics shows a dramatic growth trend in daily life parallel to the developments in sensors technologies and the internet. Wearable electronics that can be attached to clothing, accessories, and the human body are one of the most promising subfields. The energy requirement for the devices considering the reduction in device sizes and the necessity of being flexible and light, the existing batteries are insufficient and nanogenerators have been recognized a suitable energy source in the last decade. The mechanical energy created by the daily activities of the human body is an accessible and natural energy source for nanogenerators. Fiber-structured functional materials contribute to the increase in energy efficiency due to their effective surface to volume ratio while providing the necessary compatibility and comfort for the movements in daily life with its flexibility and lightness. Among the potential solutions, electrospinning stands out as a promising technique that can meet these requirements, allowing for simple, versatile, and continuous fabrication. Herein, wearable electronics and their future potential, electrospinning, and its place in energy applications are overviewed. Moreover, piezoelectric, triboelectric, and hybrid nanogenerators fabricated or associated with electrospun fibrous materials are presented.Article Citation - WoS: 22Citation - Scopus: 25Cryopreservation of a Cell-Based Biosensor Chip Modified With Elastic Polymer Fibers Enabling Ready-To On-Site Applications(Elsevier, 2021) Özsoylu, Dua; Isık, Tuğba; Demir, Mustafa M.; Schoning, Michael J.; Wagner, TorstenAn efficient preservation of a cell-based biosensor chip to achieve a ready-to-use on-site system is still very challenging as the chip contains a living component such as adherent mammalian cells. Herein, we propose a strategy called on-sensor cryopreservation (OSC), which enables the adherent cells to be preserved by freezing (-80 degrees C) on a biosensor surface, such as the light-addressable potentiometric sensor (LAPS). Adherent cells on rigid surfaces are prone to cryo-injury; thus, the surface was modified to enhance the cell recovery for OSC. It relies on i) the integration of elastic electrospun fibers composed of polyethylene vinyl acetate (PEVA), which has a high thermal expansion coefficient and low glass-transition temperature, and ii) the treatment with O-2 plasma. The modified sensor is integrated into a microfluidic chip system not only to decrease the thermal mass, which is critical for fast thawing, but also to provide a precisely controlled micro-environment. This novel cryo-chip system is effective for keeping cells viable during OSC. As a proof-of-concept for the applicability of a ready-to-use format, the extracellular acidification of cancer cells (CHO-K1) was evaluated by differential LAPS measurements after thawing. Results show, for the first time, that the OSC strategy using the cryo-chip allows label-free and quantitative measurements directly after thawing, which eliminates additional post-thaw culturing steps. The freezing of the chips containing cells at the manufacturing stage and sending them via a cold-chain transport could open up a new possibility for a ready-to-use on-site system.Article Citation - WoS: 14Citation - Scopus: 15Medical Waste Treatment Via Waste Electrospinning of Ps(Korean Fiber Society, 2018) Isık, Tuğba; Demir, Mustafa MuammerBody fluid medical wastes are infectious clinical wastes (blood, saliva, urine) due to their high pathogenic content. Incineration is the most commonly used method in waste management that possess high water content along with molecularly dissolved species such as proteins. The process is costly; so that the removal of solid content dissolved in aqueous part by preliminary filtration can reduce the volume of the waste material. In this study, fibrous mats were prepared by electrospinning of PS wastes from DMF and THF solutions. Then they are employed in the removal of protein-based solid contents of body fluid medical wastes before their disposal. Two sources of PS waste (CD cover and Styrofoam) were employed along with virgin PS for comparison. The adsorption capacity of as-prepared electrospun fibers was examined for three model proteins: Bovine Serum Albumin (BSA), Myoglobin (MYO), and Trypsin (TRY). The fibers obtained from PS CD wastes have remarkably larger protein sorption capacities (particularly BSA) than the fibers obtained from virgin PS. XPS reveals the presence of CaCO3 domains in CD covers added into PS during their production steps probably to increase mechanical properties. There may be an electrostatic interaction between Ca2+ and the negatively charged groups of the protein. In this way, PS wastes could be converted to a beneficial secondary product by electrospinning and also resulting materials promises for the disposal of body fluid medical wastes. This may be one of the frontiers study on the removal of medical wastes by adsorbents produced via electrospinning of waste polymers.Article Citation - WoS: 39Citation - Scopus: 43Tailored Electrospun Fibers From Waste Polystyrene for High Oil Adsorption(Elsevier Ltd., 2018) Isık, Tuğba; Demir, Mustafa MuammerRecent ship accidents that resulted catastrophic oil spills necessitate producing environmentally friendly, costeffective, and large-scale fabrication technology for oil-sorbent materials. Various material systems have been employed to fabricate sorbent materials; however, using fresh material components as adsorbent can lead to a secondary pollution. Therefore, recycling of plastics wastes for the fabrication of adsorbent material could be a wise approach to handle this environmental issue. In this study, foam-expanded polystyrene (f-PS), a commodity polymer used for insulation and packing materials, was electrospun from solution mixture of THF and DMF. Surface and interior porosity were achieved from individual fibers electrospun froma composition of DMF: THF (1:3) at 20-wt% of solid f-PS content. The resulting adsorbents exhibited a considerable hydrophobicity (WCA approximate to 120 degrees) and oleophilicity (CA approximate to 10 degrees), which can selectively adsorb both vegetable and engine oils from polluted waters. The porosity of the fibers has significant effect on the sorption capacity and separation efficiency up to 124 g/g and 99%, respectively. Thus, electrospun mats of the polystyrene wastes offer a promising adsorbent for the remediation of oily wastewaters. (C) 2018 Published by Elsevier B.V.Article Citation - WoS: 63Citation - Scopus: 65Amidoxime Functionalized Polymers of Intrinsic Microporosity (pim-1) Electrospun Ultrafine Fibers for Rapid Removal of Uranyl Ions From Water(Elsevier Ltd., 2019) Satılmış, Bekir; Isık, Tuğba; Demir, Mustafa Muammer; Uyar, TamerThe Polymers of Intrinsic Microporosity (PIM-1) is considered as one of the most promising polymer candidates for adsorption applications owing to its high surface area and the ability to tailor the functionality for the targeted species. This study reports a facile method for the preparation of amidoxime functionalized PIM-1 fibrous membrane (AF-PIM-FM) by electrospinning technique and its practical use for the extraction of U(VI) ions from aqueous systems via column sorption under continuous flow. Fibrous membrane form of amidoxime functionalized PIM-1 (AF-PIM-FM) was prepared by electrospinning method owing to its excellent processability in dimethylformamide. Bead-free and uniform fibers were obtained as confirmed by SEM imaging and average fiber diameter was 1.69 +/- 0.34 mu m for AF-PIM-FM. In addition, electrospun PIM-1 fibrous membrane (PIM-FM) was prepared as a control group. Structural and thermal characterization of powder and membrane forms of the materials were performed using FT-IR, H-1 NMR, XPS, Elemental analyses, TGA, and DSC. The porosity of the samples was measured by N-2 sorption isotherms confirming amidoxime PIM-1 still maintain their porosity after functionalization. Amidoxime functionality along with membrane structure makes AF-PIM-FM a promising material for uranyl adsorption. First, a comparison between powder and membrane form of amidoxime functionalized PIM-1 was investigated using batch adsorption process. Although membrane form has shown slightly lower adsorption performance in the batch adsorption process, the advantage of using the membrane in column adsorption processes makes membrane form more feasible for real applications. In addition, amidoxime modification enhanced the uranium adsorption ability of PIM-FM up to 20 times. The effect of initial concentration and pH were investigated along with regeneration of the adsorbents. AF-PIM-FM was successfully used for five adsorption-desorption cycles without having any damage on the fibrous structure.Article Citation - WoS: 31Citation - Scopus: 34Dual Remediation of Waste Waters From Methylene Blue and Chromium (vi) Using Thermally Induced Zno Nanofibers(Elsevier, 2020) Elhousseini, Mohamed Hilal; Isık, Tuğba; Kap, Özlem; Verpoort, Francis; Horzum, NesrinElectrospun zinc oxide (ZnO) nanofibers have been significantly improved via a simple heat treatment modification. The present work reports an intriguing cost-effective microstructure tuning, by drastically dropping the temperature of the calcined sample during the cooling period, to get highly photocatalytically active ZnO nanofibers. The calcination temperatures are deducted from thermogravimetric analysis, the phase and purity are confirmed by X-ray diffraction, while the morphology and texture have been revealed by field emission scanning electron microscopy and high-resolution transmission electron spectroscopy. X-ray photoelectron spectroscopy was conducted to get further insight on the surface composition and oxidation states, while N-2-adsorption isotherms were analyzed using the Brunauer-Emmet-Teller methodology. The crystallinity, surface area, and porosity of the ZnO nanofibers, as well as the exposure of active sites, have been enhanced by the rapid cooling method. Photodegradation activity toward methylene blue was improved from 88% to 94%, and 85% to 97%, for free cooled and rapid cooled samples calcined at 300 degrees C and 500 degrees C respectively. The adsorption of chromium (VI) was also tested and reached around 85 mg/g at 100 ppm without being saturated, thereby highlighting one of the most cost-effective performance-enhancing modifications so far that could be extended on different metal oxide nanomaterials.