Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 12Citation - Scopus: 15Effect of Heat Treatment on the Blast Loading Response of Combined Geometry Shell Core Sandwich Structures(Elsevier Ltd., 2016) Taşdemirci, Alper; Kara, Ali; Turan, Kıvanç; Şahin, Selim; Güden, MustafaThe effect of heat treatment on the dynamic crushing and energy absorption behavior of combined geometry shell cores (hemisphere and cylinder) of sandwich structures were investigated both experimentally and numerically. The applied heat treatment on the combined geometry shell cores relieved the stress caused by deep drawing, diminishing the peak transmitted forces. The verified numerical models of the as-received and heat-treated combined geometry shells were used to model blast loading of various sandwich configurations and the additional sandwich configurations of reversing the cylindrical side of the cores to the impacted side. Both the applied heat-treatment and the reversing process decreased the magnitude of the force transmitted to the protected structure. The applied heat treatment increased the arrival time of blast force wave to the protected structure, while the reversing resulted in opposite.Article Citation - WoS: 32Citation - Scopus: 37Modeling Quasi-Static and High Strain Rate Deformation and Failure Behavior of a (±45) Symmetric E-glass/Polyester Composite Under Compressive Loading(Elsevier Ltd., 2013) Kara, Ali; Taşdemirci, Alper; Güden, MustafaQuasi-static (1 × 10−3–1 × 10−2 s−1) and high strain rate (∼1000 s−1) compressive mechanical response and fracture/failure of a (±45) symmetric E-glass/polyester composite along three perpendicular directions were determined experimentally and numerically. A numerical model in LS-DYNA 971 using material model MAT_162 was developed to investigate the compression deformation and fracture of the composite at quasi-static and high strain rates. The compressive stress–strain behaviors of the composite along three directions were found strain rate sensitive. The modulus and maximum stress of the composite increased with increasing strain rate, while the strain rate sensitivity in in-plane direction was higher than that in through-thickness direction. The damage progression determined by high speed camera in the specimens well agreed with that of numerical model. The numerical model successfully predicted the damage initiation and progression as well as the failure modes of the composite.Conference Object Citation - WoS: 11Citation - Scopus: 18Experimental and Numerical Investigation of High Strain Rate Mechanical Behavior of a [0/45 - 45] Quadriaxial E-glass/Polyester Composite(Elsevier Ltd., 2011) Taşdemirci, Alper; Kara, Ali; Turan, Ali Kıvanç; Tunusoğlu, Gözde; Güden, Mustafa; Hall, Ian W.Quasi-static (10−3–10−1 s−1) and high strain rate (∼900 s−1) compression behavior of an E-Glass fiber woven fabric reinforced Polyester matrix composites was investigated by using a Shimadzu AG-I testing machine and a Split Hopkinson Pressure Bar apparatus in the Dynamic Testing and Modeling Laboratory of Izmir Institute of Technology. During the experiments, a high speed camera was used to determine deformation behavior. In both directions, modulus and failure strength increased with increasing strain rate. Higher strain rate sensitivity for both elastic modulus and failure strength was observed in the in-plane direction. Based upon these experimental data, a numerical model was developed using the commercial explicit finite element code LS-DYNA to investigate compressive deformation and damage behavior of composites. Excellent agreement was demonstrated for the case of high strain rate loading. Also, the fracture geometries were successfully predicted with the numerical model.