Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

2013 - 2019212020 - 20257

Settings

Author: search.filters.author.Kiper, GökhanWoS Q: search.filters.wosQuartile.N/A

Search Results

Now showing 1 - 10 of 28
  • Conference Object
    Redundancy resolution options for the twin-it-romans robotic hybrid manufacturing system
    (Springer Science and Business Media B.V., 2025) Gündüz, G.M.; Dede, Mehmet İsmet Can; Kiper, Gökhan; Schmitz, M.; Corves, B.
    The Twinnig Iztech in Robotics Manufacturing System (TWIN-IT-ROMANS) project funded by EU Horizon -Widera-2023-Access-02-01 aims to develop a hybrid manufacturing system that can perform additive and subtractive manufacturing processes and inline quality control using a robotic system. The system will incorporate a 6-degree-of-freedom robot arm and a positioner with 2-degree-of-freedom, which will operate synchronously. This manipulation system is to be designed for performing different manufacturing operations with different degrees-of-freedom requirements. In order to reveal alternative trajectory planning scenarios for this system, this paper presents an initial review of redundancy resolution approaches for kinematically redundant robotic manipulators. First, the four main approaches for redundancy resolution techniques are introduced. Then main studies on energy minimization and stiffness maximization for kinematically redundant robotic manipulators are reviewed. Similar or new approaches are planned to be generated and implemented for the redundant system for hybrid manufacturing. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2025.
  • Book Part
    Citation - WoS: 1
    Citation - Scopus: 1
    A Historical Review of Polyhedral Linkages
    (Springer, 2024) Kiper, Gökhan
    Polyhedral linkages are linkages that resemble polyhedral shapes at different configurations. This paper summarizes the necessary geometrical fundamentals of polyhedral geometry and presents a historical and critical review of the polyhedral linkage designs available in the literature. Basic definitions of polyhedral geometry and operations are needed to comprehend and design polyhedral linkages. First, early works on polyhedral linkages are presented, where flexible polyhedra with rigid faces and flexible edges are issued. The final part is reserved to conformal polyhedral linkages, which go through shape transformations while plane, dihedral and solid angles are preserved. Conformal polyhedral linkages are examined in four categories: 1) Jitterbug-like linkages with screwing polygonal links connected to each other with dihedral angle preserving links, 2) polyhedral linkages with planar kinematic chains in radial motion planes, 3) polyhedral linkages with planar kinematic chains on faces, that are connected to each other with dihedral angle preserving links, and 4) other conformal polyhedral linkages. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.
  • Conference Object
    Citation - Scopus: 3
    Four-bar function generation using excel solver
    (Springer, 2023) Söylemez, Eres; Kiper, Gökhan
    The Chapter presents a simple and efficient way of approximating a function with a four-bar mechanism using four or five design parameters including one or both of the initial crank angles. The method only involves solution of linear set of equations and evaluating determinants, whereas nonlinear equations are numerically solved using a simple program such as Excel. So, the method is easy to explain and can be taught in an undergraduate course along with the wellknown linear three precision point synthesis problem. Precision point synthesis, order synthesis, mixed order synthesis, least squares approximation and extreme point synthesis can all be treated using the same method. The proposed method is illustrated with numerical examples for all mentioned synthesis problems and shown to be quite efficient with very low amount of structural error values.
  • Conference Object
    Citation - Scopus: 3
    Design and Balancing of a Novel 2r1t Manipulator With Remote Center of Motion
    (Springer, 2023) Yılmaz, Tuğrul; Kiper, Gökhan
    The paper presents a novel manipulator design to be used as an endoscope holder for endonasal skull base surgeries. The manipulator should provide two rotational and one translational motions for the endoscope, where it should be able to be oriented about and slide along the tip of the nostril of a patient as a pivot point. First, suitable manipulators with remote center motion are investigated. Manipulators with serial and hybrid kinematic structure and redundant manipulators with a passive joint are examined. A serial manipulator with a circular arc as the second rotation axis is chosen for the detailed design. The novelty of the kinematic structure of the manipulator is that the end-effector heave motion is achieved in a tangential direction to the circular arc. The constructional design and counter-mass balancing solution for the manipulator are presented. The total assembly mass is 11.6 kg for navigating an endoscope of 0.44 kg mass.
  • Conference Object
    Citation - Scopus: 2
    Experimental Compliance Matrix Derivation for Enhancing Trajectory Tracking of a 2-Dof High-Accelerated Over-Constrained Mechanism
    (Springer, 2022) Paksoy, Erkan; Dede, Mehmet İsmet Can; Kiper, Gökhan
    If the positioning accuracy of the end-effector of a robot has high priority, compliance characteristics of the elements of its mechanism should be considered. Due to the external loading on the robot, the dimensions of the elements change and this leads to positioning errors for the end-effector. In this paper, an experimental test setup and an experimental procedure are described to derive the compliance characteristics of a planar 2-degree-of-freedom mechanism.
  • Conference Object
    A sustainable association case study: IFToMM member organization Turkey
    (Springer, 2022) Kiper, Gökhan; Söylemez, Eres
    As a member of IFToMM founded in 2011, Turkish Machine Theory Association’s (MakTeD) structure has put special emphasis on sustainability of the association and initiated several activities for improving the quality of education and research in mechanism and machine science area, hence supporting the SDG4 Quality Education of the UN. This paper presents the activities and methodologies of MakTeD. The paper starts with a brief history of mechanism and machine science in Turkey. In 10 years MakTeD organized 4 symposiums, 1 conference, 4 summer/winter schools, 8 workshops and hosted an IFToMM Executive Council meeting. Each chapter of the biyearly held National Symposium on Theory of Machines is held by a different university and especially newly established and the universities in relatively smaller cities are prioritized in order to promote those universities and to contribute to development of these universities. Especially the summer/winter schools and workshops have a widespread impact on mechanism and machine science education and research at the universities and institutions. MakTeD also contributes to the community with published books and support programs for young researchers.
  • Conference Object
    Citation - Scopus: 2
    Function Generation Synthesis With Planar 4-Bar Linkage as a Mixed Problem of Correlation of Crank Angles and Dead-Center Design
    (Springer Verlag, 2019) Kiper, Gökhan; Erez, Melih
    The function generation synthesis of planar four-bar linkage is formulated as a mixed problem of correlation or crank angles and dead-center design. The syn-thesis is based on three desired configurations of the linkage, where the input and output joint angles are specified for two of the configurations and the coupler link is folded upon the output link for the third configuration. The formulation results in a set of nonlinear equations which can be solved analytically. The formulations are tested with numerical examples and similar mixed function generation problems are briefly discussed.
  • Conference Object
    Conceptual Design of a 2-Dof Planar High-Speed Industrial Parallel Manipulator
    (Springer, 2019) Uzunoğlu, Emre; Özkahya, Merve; Paksoy, Erkan; Taner, Barış; Dede, Mehmet İsmet Can; Kiper, Gökhan
    This study focuses on conceptual design alternatives for a planar high-speed/high-precision manipulator in terms of mechanism structure, control strate-gy, and drive system selection. These concepts are investigated specifically for planar 5-bar based parallel linkages. An over-constrained 6-bar linkage with par-allelogram loops and its simply constrained version are selected for detailed de-sign. In addition, a model-based control strategy including a stiffness model is discussed for future studies. Alternative drive systems are evaluated. Finally a prototype is presented.
  • Conference Object
    Kinematic Synthesis of Planar 4-Bar Path Generators for Finite Line Positions
    (Springer Verlag, 2019) Kiper, Gökhan; Söylemez, Eres
    Although the kinematic synthesis of planar function, point-path and motion gen-erators are vastly studied in the literature, surprisingly synthesis of line-path gen-erators is not formulized in detail. This study presents the formulization of the planar 4-bar line-path generator synthesis problem for up to 5 homologous posi-tions. Numerical examples for 3 and 4 line positions are presented for the illustra-tion of the formulations.
  • Conference Object
    Citation - Scopus: 4
    Static Force Balancing of a 2r1t Parallel Manipulator With Remote Center of Motion
    (Springer Verlag, 2019) Yaşır, Abdullah; Kiper, Gökhan; Dede, Mehmet İsmet Can; Van der Wijk, Volkert
    Assistive robots in surgical applications should be gravity balanced due to safety considerations. This study presents a gravity balancing solution for a 3-degree-of-freedom parallel manipulator to be used as an endoscope navigation robot for transnasal minimal invasive surgery applications. The manipulator has a rather simple structure that allows individual balancing of the three legs in their respec-tive planes of motion. First, sole counter-mass balancing is investigated, but it is seen that the extra mass amount is too much. Sole spring balancing is not consid-ered as an option due to constructional complexity. A hybrid solution as a combi-nation of counter-mass and spring balancing is devised. In the proposed solution, the masses on the distal links of a leg are balanced with counter-masses so that all masses are lumped to the link connected to the base of the manipulator. Hence the problem is simplified into the balancing of a pendulum. The necessary formula-tions are derived and numerical calculations demonstrate that the hybrid balancing yields a feasible solution.