Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 1Citation - Scopus: 1Hydrothermal Synthesis, Characterization and Catalytic Activities of a Keggin Structure of (4,4′-Bpyh2)3[pw12o40]2•3h2o and a Wells-Dawson Structure of (4,4′-Bpyh2)3(4,4′(Elsevier, 2025) Ece, Ozlem; Chilufya, Langson; McMillen, Colin D.; Emirdag-Eanes, MehtapTwo novel polyoxometalates composed of heteropolytungstates, (4,4 '-bpyH2)3[PW12O40]2 center dot 3H2O (1) and (4,4 '- bpyH2)3(4,4 '-bpyH)1.75[Cu(bpy)2]0.25[H2P2W18O62]2 (2) have been synthesized under hydrothermal conditions and characterized by single crystal X-ray diffraction and TGA methods. Compound 1 crystallizes in the cubic space group Ia-3with a = 25.9356(12) angstrom, b = 25.936(3) angstrom, c = 25.936(3) angstrom, alpha = 90.00, (3= 90.00, gamma= 90.00 and Z = 8, and compound 2 crystallizes in the triclinic space group P-1with a = 13.5194(17) angstrom, b = 22.400(3) angstrom, c = 27.374(4) angstrom, alpha = 79.833(3), (3= 77.439(3), gamma= 80.213(4) and Z = 2. In addition to structural characterization, the catalytic activities of 1 and 2 were determined in hydrolysis reactions. In the catalytic study, starch hydrolysis reactions were performed by using hydrothermal synthesis, and starch was hydrolyzed successfully at 150 degrees C, 5 h, based on the results of Lugol's test, which highest conversion yields above 90 wt.% under optimum reaction conditions. FT-IR analysis and catalyst reusability tests were also performed for each compound. No appreciable loss was observed in activity after five reaction cycles.Article Citation - WoS: 15Citation - Scopus: 21Triboluminescent Electrospun Mats With Blue-Green Emission Under Mechanical Force(American Chemical Society, 2017) İncel, Anıl; Varlıklı, Canan; McMillen, Colin D.; Demir, Mustafa MuammerFibrous mechanosensing elements can provide information about the direction of crack propagation and the mechanism of material failure when they are homogeneously dispersed into the bulk volume of materials. A fabrication strategy of fibrous systems showing triboluminescent (TL) responses is in high demand for such applications. In this work, micrometer-sized Cu(NCS)(py)2(PPh3) crystals were synthesized, and polymeric fibrous mats containing the TL crystals were obtained via electrospinning as a stress probe for the determination of mechanical impact. Four different polymeric systems have been employed (PMMA, PS, PU, and PVDF), and the mechano-optical sensing performance of electrospun mats of the polymer-crystal composites was measured. Photophysical properties (quantum yield, band gap, and broadness of the emission) of the TL crystal/electrospun mat composites were also studied. TL and PL emission maxima of the PU-based composite mat show identical behavior due to the chemical affinity between the two structures and the smallest fiber diameter. Moreover, the PU fiber mats exhibit long-lived bluish-green emission persisting over a large number of drops.Article Citation - WoS: 31Citation - Scopus: 36Integration of Triboluminescent Eud4tea Crystals To Transparent Polymers: Impact Sensor Application(American Chemical Society, 2017) İncel, Anıl; Eanes, Mehtap; McMillen, Colin D.; Demir, Mustafa MuammerLanthanide-based organometallic materials are well-known candidate triboluminescent (TL) materials that can show bright emission when a mechanical force is applied. These materials are usually in the form of crystalline powders, and it is often useful to integrate these samples into a polymer matrix in order to achieve processability, enabling coating from a solution/molten state or fabrication as a complex-shaped matrix. In this work, micrometer-sized europium tetrakis (dibenzoylmethide) triethylammonium (EuD4TEA) crystals were synthesized and integrated with various transparent polymers (PMMA, PS, PVDF, and PU) using two approaches: (i) blending and (ii) surface impregnation. In the former method, the crystalline particles were molecularly dissolved; therefore, a TL response cannot be achieved. More than 10 wt % TL crystals in the composite is needed to obtain TL signals. However, TL signal was achieved at 2.5 wt % when a composite was prepared by the latter approach. TL intensity shows exponential decay with consecutive mechanical action. The TL emission of PU-based surface impregnated composite expires with long-lived emission, and maximum TL response with respect to applied force was measured between 2.45 and 42.0 N.Article Citation - WoS: 7Citation - Scopus: 7Hydrothermal Synthesis of New Rare Earth Silicate Fluorides: a Novel Class of Polar Materials(Academic Press Inc., 2012) McMillen, Colin D.; Eanes, Mehtap; Stritzinger, Jared T.; Kolis, Joseph K.Polar crystals provide an interesting avenue for materials research both in the structures they form and the properties they possess. This work describes the hydrothermal synthesis and structural characterization of three novel silicate fluorides. Compound (1), LiY 3(SiO 4) 2F 2 crystallizes in space group C2/c, with a=17.651(4) Å, b=4.8868(10) Å, c=11.625(2) Å and β=131.13(3)°. BaY 2(Si 2O 7)F 2 (2) crystallizes in space group P-1, with a=5.1576(10) Å, b=6.8389(14) Å, c=11.786(2) Å, α=93.02(3)°, β=102.05(3)° and γ=111.55(3) °. Finally, the structure of Ba 2Y 3(SiO 4) 2F 5 (3) was determined in the polar orthorhombic space group Pba2, having unit cell parameters a=8.8864(18) Å, b=12.764(3) Å and c=5.0843(10) Å. The structures are compared based on their building blocks and long range polarities. Aligned silicate tetrahedra segregated into a single layer in (3) impart the observed polarity.Article Citation - WoS: 5Citation - Scopus: 5Hydrothermal Synthesis and Characterization of One Dimensional Chain Structures of Monolacunary Keggin Polyoxoanions Substituted With Copper(Elsevier Ltd., 2015) Eanes, Mehtap; Önen, Banu; McMillen, Colin D.Two novel polymeric polyoxometallates constructed from transition metal substituted heteropolytungstates, [(4,4’bpyH2)2(4,4’bpyH)][PCuW11O39]·H2O (1), and [(4,4’bpyH2)(pyH)3][PCuW11O39]·2H2O (2), (4,4’bpy = 4,4’bipyridine, py = pyridine) have been synthesized under hydrothermal conditions and characterized by IR, TGA, single crystal X-ray diffraction and magnetic measurements. The product formation showed a high sensitivity toward experimental factors including pH and stirring. Compounds 1 crystallizes in the monoclinic space group P2(1)/n with a = 13.503(3) Å, b = 26.726(5) Å, c = 15.168(3) Å, = 99.61(3)° and Z=4. The second compound also crystallizes in space group P2(1)/n, but with a = 13.519(3) Å, b = 20.431(4) Å, c =18.655(4) Å, = 96.52(3)° and Z=4. Compound 1 exhibits a zigzag chain structure, while compound 2 exhibits a straight chain structure. Compound 2 is the first example of a polyoxometallate containing 1D chains of transitionmetal- substituted heteropolytungstate designed with two significantly different organic units as the countercations. The Cu2+ ions in 1 exhibit paramagnetic behavior.