Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

Settings

Author: search.filters.author.Polat, HürriyetHas files: Yes

Search Results

Now showing 1 - 10 of 26
  • Article
    Citation - WoS: 2
    Citation - Scopus: 3
    A Phenomenological Kinetic Flotation Model: Distinct Time-Variant Floatability Distributions for the Pulp and Froth Materials
    (Elsevier, 2023) Polat, Mehmet; Polat, Hürriyet
    A simple and easy-to-use phenomenological kinetic flotation model, strongly connected with the physics of the process, is proposed in this paper. The model explicitly contains the cell volume, aeration rate, volumetric holdup, mean bubble size, and particle density as input variables. It can be employed to characterize the floatability distributions of the particles in the pulp and the froth separately any time during the flotation process. Two new time-dependent kinetic parameters, the bubble loading factor & phi;(t) and the maximum cell mass transfer capacity Mmax(t) also appear in the model expression. & phi;(t) is a measure of the degree of crowding of the bubble surfaces and accounts for the deviations from the first-order rate equation. Mmax(t) describes the maximum amount of mass that can be transported to the froth phase by the bubble population in the cell. Screen fractionation of each froth product collected at different time intervals during a single kinetic flotation test is sufficient to generate the data required by the model for analysis. Application of the model to this data yields directly time-dependent functions for the floatability of the particles reporting to froth Kf(t) or remaining in the cell Kp(t) for each size fraction separately, without the need for any empirical parameters. The test of the model was carried out using published kinetic flotation data from the literature.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 7
    Designing Robust Xylan/Chitosan Composite Shells Around Drug-Loaded Msns: Stability in Upper Git and Degradation in the Colon Microbiota
    (Elsevier, 2023) Zeybek, Nüket; Büyükkileci, Ali Oğuz; Güleç, Şükrü; Polat, Mehmet; Polat, Hürriyet
    ong residence times, near-neutral pH values, and release triggered by the enzymatic action of the resident microbiota offer unique opportunities for improved drug delivery in the colon. The fact that a delivery agent must also pass through the complete GI tract without degradation presents a challenge due to widely changing pH conditions. In this study, a promising colon-targeted drug delivery system was composed of a xylan/chitosan composite shell formed on curcumin-loaded mesoporous silica nanoparticles (MSNs). A novel synthesis approach was employed to facilitate precipitation of negatively charged xylan on negatively charged MSNs by concurrent chitosan polymerization. Curcumin-loaded xylan/chitosan-coated MSNs (C-MSNs) were determined to contain nearly 42% xylan by the inclusion of chitosan in a one-to-one ratio with xylan. The xylan/chitosan composite shell demonstrated excellent stability in the acidic upper GI tract. The hydrolysis of glycosidic bonds by resident microbiota was the triggering mechanism for xylan degradation and curcumin release in the colon. The presence of xylan has the further benefit of increasing the number of beneficial bacteria and improving short-chain fatty acid production for improved colon health.
  • Article
    Citation - WoS: 8
    Citation - Scopus: 11
    The Effect of Protein Bsa on the Stability of Lipophilic Drug (docetaxel)-Loaded Polymeric Micelles
    (Elsevier, 2021) Polat, Hürriyet; Çevik Eren, Merve; Polat, Mehmet
    Polymeric micelles are promising delivery vehicles for improving the efficacy of anticancer drugs and reducing their side effects. However, considering the binding ability of serum albumin, the possible interaction of micelles with the native plasma components in the bloodstream raises serious questions on micellar stability. The stability of barren or drug-loaded copolymeric micelles was investigated systematically in distilled water (DW) and simulated body fluid (SBF) solutions in the presence of a model protein. The copolymer was a Pluronic® series triblock copolymer (P-123), the drug was strongly lipophilic docetaxel (DOC) and the protein was Bovine Serum Albumin (BSA). The effect of such factors as BSA and DOC concentrations and the aging of the micellar solutions was studied. Both the barren and drug-loaded micelles were quite stable in blank DW and SBF solutions for long times up to 10 days. They lost integrity and showed no inclination to re-assemble when the BSA concentration reached a critical value, which was very close to the plasma Human Serum Albumin (HSA) concentration. The presence of DOC in the micellar cores could not prevent disintegration. The results illustrate clearly that ensuring the stability of polymeric micelles in blood plasma should be an important design factor in their use as drug carriers.
  • Book Part
    Citation - Scopus: 6
    Recent Advances in Chitosan-Based Systems for Delivery of Anticancer Drugs
    (Springer, 2020) Polat, Mehmet; Polat, Hürriyet
    Problems in transporting drug molecules to tumor sites in required dose or constitution lead to low efficacy and significant side effects. Shielding the drug molecules in micelles, liposomes, or nanoparticles is a major line of investigation to improve chemotherapeutic treatment. Though compatibility for proper envelopment of the drug and timely release at the tumor site are required of such a carrier, protecting its own physicochemical and morphological integrity during transport is another precondition. Because of its superior polymerization capability, biocompatibility, pH dependence, and charging characteristics, chitosan has been in the forefront of potential drug carriers. Numerous synthesis routes for chitosan-based nanocarriers have been suggested to the extent that a search of the literature published since 2000 with the keywords “novel + nano + chitosan” in the title results in 527 articles, indicating the bewildering quality and quantity of the new information. This review was carried out not only to peruse this large amount of work on chitosan-based anticancer drug delivery but also to extract manageable patterns from numerous synthesis routes. The main conclusion is that the synthesis methods suggested in literature can be combined into two main routes, and the degree of hydrophobicity of the drug determines which route should be followed. © Springer Nature Singapore Pte Ltd. 2019.
  • Correction
    Erratum To: Tannery Wastewater Sediments Produced by Clinoptiolite/Polyacrylamide-aided Flocculation as a Clay Additive in Brick Making
    (Australian Ceramic Society, 2017) Israil, L. I.; Köseoğlu, Kemal; Cengizler, H.; Polat, Hürriyet
    [No abstract available]
  • Article
    Citation - WoS: 13
    Citation - Scopus: 15
    Analysis of Dilution Induced Disintegration of Micellar Drug Carriers in the Presence of Inter and Intra Micellar Species
    (Elsevier, 2020) Polat, Hürriyet; Kutluay, Gülistan; Polat, Mehmet
    Micelles of self-assembling polymeric surfactant molecules are promising nanoscopic carriers for lipophilic and toxic drugs, genes, and imaging molecules. Though it is a must for successful transport, ensuring micelle integrity is a challenge during intravenous injection where micelles must endure abrupt dilutional effects and encounters with native molecules. Therefore, direct observational evidence of how micelles behave during dilution is valuable in manipulating the designs of these carriers for a succesful drug delivery. Morphology and stability of the barren and a drug-loaded (lipophilic probucol) micelles of a polymeric surfactant (Pluronic® P123) were monitored during systematic re-dilution in distilled water and simulated body fluid in the presence of a model protein (bovine serum albumin). It was observed through surface tension, dynamic light scattering, laser velocimetry, transmission scanning and transmission electron microscopy, and atomic force microscopy analyses that the micelles disintegrated to various degrees in all cases upon dilution. The results indicate that dilution effects must be taken into account in designing micellar drug carriers. The assistance of some other means of protection such as encapsulation should be considered for ensuring micelle integrity within the bloodstream. © 2020 Elsevier B.V.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 5
    Tannery Wastewater Sediments Produced by Clinoptiolite/Polyacrylamide-aided Flocculation as a Clay Additive in Brick Making
    (Springer Verlag, 2017) Köseoğlu, Kemal; Cengizler, H.; İsrail, L. İ.; Polat, Hürriyet
    Toxic tannery wastewater(s) (TWW) pose(s) a great risk to the environment. This study explores the potential of mitigating the harmful effects of TWW through sedimentation using clinoptiolite in the presence of various anionic, cationic and non-ionic flocculants with different molecular weights and charge densities followed by encapsulation in a brick structure for stability. Compressive strength (CS), size reduction after firing (SRAF), water absorption (WA) and colouring parameters of bricks were determined. X-Ray diffraction (XRD) and scanning electron microscopy (SEM)-energy dispersive X-ray (EDX) analyses were conducted on brick bodies. Kinetic leaching experiments were conducted for possible heavy metal release from the bricks. Bricks containing 10 wt% leather waste and 5 wt% clinoptiolite sintered at 800 °C instead of 920 °C possessed similar properties to the standard brick (SB).
  • Article
    Citation - WoS: 16
    Citation - Scopus: 19
    Designing of Spherical Chitosan Nano-Shells With Micellar Cores for Solvation and Safeguarded Delivery of Strongly Lipophilic Drugs
    (Elsevier Ltd., 2017) Cihan, Esra; Polat, Mehmet; Polat, Hürriyet
    Chitosan is a very effective biopolymer for drug delivery purposes due to its biocompatibility, positive charge and exceptionally pH sensitive degradability behavior in an aqueous medium. Nevertheless, its inability for dissolving lipophilic drug active material and the difficulties in controlling the size and shape of the synthesized particles in nanometer range are critical drawbacks in its effective use. In this study, a synthesis procedure which addresses both issues simultaneously is presented. The procedure is based on initial dissolution of lipophilic drug molecules within the hydrophobic cores of the micelles of a bio-compatible block-copolymer by ionic gelation and subsequent formation of a chitosan shell by polymerization around the micellar structures. Well-formed, hollow and perfectly spherical chitosan particles (nano-shells) in the 30–300 nm size range could be successfully manufactured. Characterization by STEM, TEM, AFM, FTIR and DLS, DLS-LDV techniques showed clearly that the drug was successfully incorporated into the chitosan structure. It was demonstrated that the particles enveloped the micelle(s) of a Pluronic copolymer (P-123) whose hydrophobic cores contained a strongly hydrophobic drug Probucol. The chitosan nano-shells are expected to act as an agent protecting the integrity of the drug-loaded micelles in the body fluid while providing a pH sensitive release medium. The drug uptake by the chitosan particles was very high. A very sharp increase in the amount of the drug released with a slight change in the acidity of the medium was an indication of the potential of the manufactured chitosan nano-shells as pH sensitive, target specific delivery vehicles for drug release.
  • Article
    Citation - WoS: 13
    Citation - Scopus: 15
    Ancillary Effects of Surfactants on Filtration of Low Molecular Weight Contaminants Through Cellulose Nitrate Membrane Filters
    (Elsevier Ltd., 2016) Olcay, Aybike Nil; Polat, Mehmet; Polat, Hürriyet
    Removal of contaminants with low molecular weight (<800 Dalton) requires the use of advanced separation techniques such as ultrafiltration (UF) or micellar enhanced ultrafiltration (MEUF). However, surface active agents invariably co-exist in waste waters along with these contaminants or they may be added intentionally as part of the separation process as in the case of MEUF. Though it is quite likely that both the filter medium and the contaminants would interact with the surfactant molecules or their micelles, there is not sufficient emphasis in the literature on the concomitant aspects of such interactions.The ancillary effects created by anionic (sodium dodecyl sulfate, SDS), cationic (hexadecyltrimethyl ammonium bromide, CTAB) and non-ionic (ethoxylated octylphenol, TX-100) surfactants on the mechanism and efficiency of the filtration process were investigated in this study. Methylene blue (MB) and cellulose nitrate membrane (CNM) filters were employed as model retentate and the separation medium. A combination of surface tension, contact angle and charge measurements demonstrated that the addition of surfactants had a remarkable effect on the filtration outcome. The effect depended on both the type and concentration of the surfactant and was manifested mainly through the creation of MB-surfactant entities which acted differently than the MB alone; but more importantly, through the interactions of the surfactant molecules/micelles and the MB-surfactant pairs with the separation membrane.
  • Article
    Citation - WoS: 140
    Citation - Scopus: 171
    Physicochemical Characterization of Chitosan Extracted From Metapenaeus Stebbingi Shells
    (Elsevier Ltd., 2011) Küçükgülmez, Aygül; Çelik, Mehmet; Yanar, Yasemen; Şen, Didem; Polat, Hürriyet; Kadak, Ali Eslem
    In this study, chitosan was extracted from Metapenaeus stebbingi shells. In order to determine physicochemical characteristics of the extracted chitosan, the yield, moisture and ash contents, degree of deacetylation, molecular weight, water and fat binding capacities, apparent viscosity and colour properties were measured using a variety of techniques including Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction. In addition, the physicochemical characteristics of the chitosan extracted from M. stebbingi shells were compared to commercial chitosan. The degree of deacetylation was calculated by the titration method and elemental analysis. The molecular weight was determined by viscosimetric methods. The results of the study indicate that shrimp shells are a rich source of chitosan as 17.48% of the shell's dry weight is consisted of this material. Extracted chitosan exhibited a lower molecular weight, higher degree of deacetylation, higher viscosity and higher water and fat binding capacities compared to the commercial chitosan.