Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
21 results
Search Results
Now showing 1 - 10 of 21
Article Citation - WoS: 16Citation - Scopus: 19Designing of Spherical Chitosan Nano-Shells With Micellar Cores for Solvation and Safeguarded Delivery of Strongly Lipophilic Drugs(Elsevier Ltd., 2017) Cihan, Esra; Polat, Mehmet; Polat, HürriyetChitosan is a very effective biopolymer for drug delivery purposes due to its biocompatibility, positive charge and exceptionally pH sensitive degradability behavior in an aqueous medium. Nevertheless, its inability for dissolving lipophilic drug active material and the difficulties in controlling the size and shape of the synthesized particles in nanometer range are critical drawbacks in its effective use. In this study, a synthesis procedure which addresses both issues simultaneously is presented. The procedure is based on initial dissolution of lipophilic drug molecules within the hydrophobic cores of the micelles of a bio-compatible block-copolymer by ionic gelation and subsequent formation of a chitosan shell by polymerization around the micellar structures. Well-formed, hollow and perfectly spherical chitosan particles (nano-shells) in the 30–300 nm size range could be successfully manufactured. Characterization by STEM, TEM, AFM, FTIR and DLS, DLS-LDV techniques showed clearly that the drug was successfully incorporated into the chitosan structure. It was demonstrated that the particles enveloped the micelle(s) of a Pluronic copolymer (P-123) whose hydrophobic cores contained a strongly hydrophobic drug Probucol. The chitosan nano-shells are expected to act as an agent protecting the integrity of the drug-loaded micelles in the body fluid while providing a pH sensitive release medium. The drug uptake by the chitosan particles was very high. A very sharp increase in the amount of the drug released with a slight change in the acidity of the medium was an indication of the potential of the manufactured chitosan nano-shells as pH sensitive, target specific delivery vehicles for drug release.Article Citation - WoS: 13Citation - Scopus: 15Ancillary Effects of Surfactants on Filtration of Low Molecular Weight Contaminants Through Cellulose Nitrate Membrane Filters(Elsevier Ltd., 2016) Olcay, Aybike Nil; Polat, Mehmet; Polat, HürriyetRemoval of contaminants with low molecular weight (<800 Dalton) requires the use of advanced separation techniques such as ultrafiltration (UF) or micellar enhanced ultrafiltration (MEUF). However, surface active agents invariably co-exist in waste waters along with these contaminants or they may be added intentionally as part of the separation process as in the case of MEUF. Though it is quite likely that both the filter medium and the contaminants would interact with the surfactant molecules or their micelles, there is not sufficient emphasis in the literature on the concomitant aspects of such interactions.The ancillary effects created by anionic (sodium dodecyl sulfate, SDS), cationic (hexadecyltrimethyl ammonium bromide, CTAB) and non-ionic (ethoxylated octylphenol, TX-100) surfactants on the mechanism and efficiency of the filtration process were investigated in this study. Methylene blue (MB) and cellulose nitrate membrane (CNM) filters were employed as model retentate and the separation medium. A combination of surface tension, contact angle and charge measurements demonstrated that the addition of surfactants had a remarkable effect on the filtration outcome. The effect depended on both the type and concentration of the surfactant and was manifested mainly through the creation of MB-surfactant entities which acted differently than the MB alone; but more importantly, through the interactions of the surfactant molecules/micelles and the MB-surfactant pairs with the separation membrane.Article Citation - WoS: 22Citation - Scopus: 26Coal Fly Ash as a Potential Fixation Reagent for Radioactive Wastes(Elsevier Ltd., 2015) Lieberman, Roy Nir; Green, Uri; Segev, Giora; Polat, Mehmet; Mastai, Yitzhak; Cohen, HaimIsrael produces ∼1.3 Mt/year of fly ash (FA), a byproduct of its coal-fired power plants. Due to increasing environmental regulations, these imported coals are processed to reduce the sulfur concentration (∼0.6%). These processing methods result in a material that has an enriched alkali/alkali earth component with pozzolanic and basic properties (pH > 10.5). FAs are utilized worldwide, mainly as a cement additive for the construction industry. Recently, it was demonstrated that Class F FA can act as an excellent fixation reagent for acidic wastes from the phosphate or the oil regeneration industries. In the current work the potential utilization of Class F FAs as fixation reagents for low-activity radioactive waste from the nuclear industry was examined. Aqueous solutions containing radionuclide simulants: cesium (Cs+), strontium, (Sr2+), and cerium (Ce3+, Ce4+) were used as case studies with promising results. It is suggested that the primary fixation mechanism involves the aluminate/silicate anions at the FA surface. A novel experimental fixation approach utilizing the formation of carbonates is demonstrated and a new interaction mechanism is suggested based on the electrostatic interactions of the positively charged fine precipitates with the negatively charged FA surface. © 2015 Elsevier Ltd. All rights reserved.Article Citation - WoS: 5Citation - Scopus: 5Determination of Electrostatic Potential Distribution by Atomic Force Microscopy (afm) on Model Silica and Alumina Surfaces in Aqueous Electrolyte Solutions(Elsevier Ltd., 2014) Yelken Özek, Gülnihal; Polat, MehmetAFM was employed as a physicochemical probe to determine the electrostatic potential distribution quantitatively on selected ideal oxide surfaces (quartz 0 0 0 1 and sapphire 0 0 0 1) in aqueous media. The force of interaction between a silicon nitride tip and the oxide surface was measured at a given point under well-defined solution conditions. Relevant theories were used to isolate the electrostatic component from the total force of interaction which was then employed to estimate the surface potential at that point. Repeating the procedure on selected locations generated a potential map of the surface. Comparison of these potentials with those obtained from independent electrokinetic measurements confirmed the validity of the approach. © 2014 Elsevier B.V. All rights reserved.Article Citation - WoS: 57Citation - Scopus: 69Leaching Behavior of Selected Trace Elements in Coal Fly Ash Samples From Yenikoy Coal-Fired Power Plants(Elsevier Ltd., 2012) Akar, Gül; Polat, Mehmet; Galecki, Greg; Üner, İpekoğluShort-term leaching test results of alkaline fly ash from Yenikoy coal-fired power plant were reported in this paper. ASTM D-3987-85 and TCLP-1311 test methods were applied to determine leaching behavior of selected elements namely, Fe, Ca, Cu, Co, Cd, Mn, Ni, Pb Zn, and Cr (VI) at different particle size fractions and test conditions. Chemical, mineralogical and morphological characterizations of ash samples were also performed using chemical, XRD and SEM-EDS analysis methods. The results showed that CaO dominates in the Yenikoy fly ash sample which directly affects the mobility of trace elements by determining the pH of the leaching medium. Higher mobility values of Cd, Co Cu, Pb, Ni and Zn elements were observed for TCLP-1311 procedure. The concentration of these elements in leachates showed a tendency to increase by decreasing particle size. Overall results suggested that the amount of the selected elements in the final leachates of both tests was lower than the limit values of landfill regulations except Cr (VI).Article Citation - WoS: 15Citation - Scopus: 12Solubility and Aging of Lead Magnesium Niobate in Water(Elsevier Ltd., 2009) Şakar-Deliormanlı, Aylin; Çelik, Erdal; Polat, MehmetLead magnesium niobate (PMN) is an important relaxor ferroelectric material commonly employed in multilayer capacitor and actuator manufacturing owing to its high dielectric constant and superior electrostrictive properties. However, stability of this material in water is not very well known and there is need for a detailed investigation. In this research, solubility of lead magnesium niobate powders in water was determined as a function of solids concentration. The obtained results showed that the amount of cation leaching from the PMN surface depends on the pH value of the suspension and the solids concentration. The Pb2+ and Mg2+ ion dissolution was very high especially in the acidic pH range. Nevertheless, neither the dissolution mechanism nor the effects of dissolved ions on the stability were the same for those ions. The study provides new aspects on the solubility of perovskite materials which possess more than one soluble cation in their structure.Article Citation - WoS: 7Citation - Scopus: 9Preparation of the Pb(mg1/3nb2 Films by Aqueous Tape Casting(Elsevier Ltd., 2009) Şakar-Deliormanlı, Aylin; Çelik, Erdal; Polat, MehmetLead magnesium niobate (PMN) is a relaxor ferroelectric material. Because of its high dielectric constant and superior electrostrictive properties it is commonly used in the manufacture of multilayer electronic devices which is typically produced by tape casting. However, preparation of PMN slurry formulations to use in aqueous tape casting process is not investigated in detail yet. Therefore, in this study aqueous PMN formulations were developed for tape casting and its relation with the final properties of PMN films were investigated. The slurries were prepared using poly(acrylic acid)-based comb polymer as the dispersant, nonionic acrylic latex as the binder and the hydroxypropyl methyl cellulose as the wetting agent. The results showed that it is possible to prepare flexible, crack-free PMN films using highly concentrated suspensions without using any plasticizer. The study gives guidelines for the aqueous tape casting of PMN and can be adapted to processing of other multi-component metal oxides.Conference Object Citation - Scopus: 3Characterization of Polysulfone Based Hemodialysis Membranes by Afm(Elsevier Ltd., 2012) Uz, Metin; Yaşar Mahlıçlı, Filiz; Polat, Mehmet; Alsoy Altınkaya, SacideMost of the hemodialysis membrane materials are hydrophobic in nature and allow protein adsorption on the surface easily due to hydrophobic interaction between membrane surface and protein molecules when in contact with blood. Adsorbed proteins can affect platelet and leukocyte adhesion, and modulate the response of plasmatic reactions followed by the activation of different defense systems in blood (Sun et al. 2003).Article Citation - WoS: 23Citation - Scopus: 24Analytical Solution of Poisson-Boltzmann Equation for Interacting Plates of Arbitrary Potentials and Same Sign(Elsevier Ltd., 2010) Polat, Mehmet; Polat, HürriyetEfficient calculation of electrostatic interactions in colloidal systems is becoming more important with the advent of such probing techniques as atomic force microscopy. Such practice requires solving the nonlinear Poisson-Boltzmann equation (PBE). Unfortunately, explicit analytical solutions are available only for the weakly charged surfaces. Analysis of arbitrarily charged surfaces is possible only through cumbersome numerical computations. A compact analytical solution of the one-dimensional PBE is presented for two plates interacting in symmetrical electrolytes. The plates can have arbitrary surface potentials at infinite separation as long they have the same sign. Such a condition covers a majority of the colloidal systems encountered. The solution leads to a simple relationship which permits determination of surface potentials, surface charge densities, and electrostatic pressures as a function of plate separation H for different charging scenarios. An analytical expression is also presented for the potential profile between the plates for a given separation. Comparison of these potential profiles with those obtained by numerical analysis shows the validity of the proposed solution. © 2009 Elsevier Inc. All rights reserved.Article Citation - WoS: 29Citation - Scopus: 38Encapsulating Fly Ash and Acidic Process Waste Water in Brick Structure(Elsevier Ltd., 2010) Köseoğlu, K.; Polat, Mehmet; Polat, HürriyetFly ash contains metals such as cadmium, iron, lead, aluminum and zinc in its structure in appreciable amounts. These metals can leach out into surface and ground waters if fly ash is not properly disposed of. A similar problem also exists for acidic process waste waters discharged by numerous industries. The purpose of this study was to utilize such wastes as additives in the production of construction quality bricks for the purpose of waste elimination. The bricks produced were subjected to flexural strength and water retention capacity tests along with heavy metal leaching experiments in order to determine the applicability of the procedure and the best possible recipes. This paper summarizes the results obtained in these tests along with the possible mechanisms involved in stabilizing the two wastes in the brick structure. © 2009 Elsevier B.V. All rights reserved.
- «
- 1 (current)
- 2
- 3
- »