Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

2023 - 20242

Settings

Author: search.filters.author.Pourpasha, HadiCOAR Access Rights: search.filters.coarAccessRights.open access

Search Results

Now showing 1 - 2 of 2
  • Article
    Citation - WoS: 19
    Citation - Scopus: 20
    Experimental Investigation of Zinc Ferrite/Insulation Oil Nanofluid Natural Convection Heat Transfer, Ac Dielectric Breakdown Voltage, and Thermophysical Properties
    (Nature Portfolio, 2024) Pourpasha, Hadi; Heris, Saeed Zeinali; Javadpour, Reza; Mohammadpourfard, Mousa; Li, Yaqing
    Improving the thermal and dielectric properties of insulation oil (INO) with nanoadditives is an important challenge, and achieving dispersion stability in these nanofluids is quite challenging, necessitating further investigation. The main goal of this study is the synthesis and use of the hydrophobicity of zinc ferrite (ZnFe2O4) nanoparticles, which can improve both the thermal and dielectric properties of the INO. This oil is made from distillate (petroleum), including severely hydrotreated light naphthenic oil (75-85%) and severely hydrotreated light paraffinic oil (15-25%). A comprehensive investigation was carried out, involving the creation of nanofluids with ZnFe2O4 nanoparticles at various concentrations, and employing various characterization methods such as X-ray diffraction (XRD), Fourier-transform infrared (FTIR), scanning electron microscopy, energy dispersive X-ray (EDX), zeta potential analysis, and dynamic light scattering (DLS). The KD2 Pro thermal analyzer was used to investigate the thermal characteristics, including the thermal conductivity coefficient (TCC) and volumetric heat capacity (VHC). Under free convection conditions, the free convection heat transfer coefficient (FCHTC) and Nusselt numbers (Nu) were evaluated, revealing enhancements ranging from 14.15 to 11.7%. Furthermore, the most significant improvement observed in the AC Breakdown voltage (BDV) for nanofluids containing 0.1 wt% of ZnFe2O4 amounted to 17.3%. The most significant finding of this study is the improvement in the heat transfer performance, AC BDV, and stability of the nanofluids.
  • Article
    Citation - WoS: 45
    Citation - Scopus: 51
    Experimental Investigation of the Effect of Graphene/Water Nanofluid on the Heat Transfer of a Shell-And Heat Exchanger
    (Wiley-Hindawi, 2023) Zolfalizadeh, Mehrdad; Heris, Saeed Zeinali; Pourpasha, Hadi; Mohammadpourfard, Mousa; Meyer, Josua P. P.
    The most common type of heat exchanger used in a variety of industrial applications is the shell-and-tube heat exchanger (STHE). In this work, the impact of graphene nanoplate (GNP)/water nanofluids at 0.01 wt.%, 0.03 wt.%, and 0.06 wt.% on the thermal efficiency, thermal performance factor, pressure drop, overall heat transfer, convective heat transfer coefficient (CVHTC), and heat transfer characteristics of a shell-and-tube heat exchanger was examined. For these experiments, a new STHE was designed and built. The novelty of this study is the use of GNPs/water nanofluids in this new STHE for the first time and the fully experimental investigation of the attributes of nanofluids. GNP properties were analysed and confirmed using analyses including XRD and TEM. Zeta potential, DLS, and camera images were used to examine the stability of nanofluids at various periods. The zeta potential of the nanofluids was lower than -27.8 mV, confirming the good stability of GNP/water nanofluids. The results illustrated that the experimental data for distilled water had a reasonably good agreement with Sieder-Tate correlation. The maximum enhancement in the CVHTC of nanofluid with 0.06 wt.% of GNP, was equal to 910 (W/m(2)K), an increase of 22.47%. Also, the efficiency of the heat exchanger for nanofluid at 0.06 wt.% improved by 8.88% compared with that of the base fluid. The heat transfer rate of the nanofluid at maximum concentration and volume flow rate was 3915 (J/kg.K), an improvement of 15.65% over the base fluid. The pressure drops increased as the flow rate and concentration of the nanofluid increased. Although increasing the pressure drop in tubes would increase the CVHTC, it would also increase the power consumption of the pump. In conclusion, nanofluid at 0.06 wt.% had good performance.