Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

2016 - 201962020 - 20221

Settings

Author: search.filters.author.Yıldız, Ümit HakanDepartment: search.filters.department.İzmir Institute of Technology. Materials Science and Engineering

Search Results

Now showing 1 - 7 of 7
  • Book Part
    Citation - Scopus: 3
    Advances and Future Perspective of Graphene Field Effect Transistors (gfets) for Medical Diagnostics and Point-Of Tools
    (World Scientific Publishing, 2022) İnanç, Dilce; Mutlu, Mustafa Umut; Karabacak, Soner; Yıldız, Ümit Hakan
    Recently, major focus has been centered to enhance the capability of graphenebased devices and to facilitate utilization of graphene for biological applications by lowering its toxicity. In this chapter, from synthesis to applications, many of the conspicuous characteristics of graphene have been elaborately reviewed. We primarily focused on graphene-based field effect transistor (FET) for medical diagnostics and point-of-care applications. The device configurations and their application potential as well as sensing capability of various graphene FETs (GFETs) have been discussed. Here, we have also presented several aspects and advantages of GFETs in medical applications while discussing their pros and cons in commercialization. We address the advances and challenges for GFET-based sensing platforms for the medical applications and elaborate the combination strategy of GFETs with the existing commercial systems. © 2023 by World Scientific Publishing Co. Pte. Ltd.
  • Other
    Macromol. Mater. Eng. 7/2016
    (Wiley, 2016) Isık, Tuğba; Horzum Polat, Nesrin; Yıldız, Ümit Hakan; Liedberg, Bo; Demir, Mustafa Muammer
    An easy-to-use test platform toward the rapid diagnosis of many life-threating diseases was developed. DNA was isolated from the mixture of BSA+DNA using fibrous commodity polystyrene, which was extremely cheap and can be readily electrospun under ambient conditions. Surface modification with Au nanoparticles improved the performance of the fibrous membrane.
  • Article
    Citation - WoS: 56
    Citation - Scopus: 55
    A Bodipy-Based Fluorescent Probe To Visually Detect Phosgene: Toward the Development of a Handheld Phosgene Detector
    (John Wiley and Sons Inc., 2018) Sayar, Melike; Karakuş, Erman; Güner, Tuğrul; Yıldız, Büşra; Yıldız, Ümit Hakan; Emrullahoğlu, Mustafa
    A boron-dipyrromethene (BODIPY)-based fluorescent probe with a phosgene-specific reactive motif shows remarkable selectivity toward phosgene, in the presence of which the nonfluorescent dye rapidly transforms into a new structure and induces a fluorescent response clearly observable to the naked eye under ultraviolet light. Given that dynamic, a prototypical handheld phosgene detector with a promising sensing capability that expedites the detection of gaseous phosgene without sophisticated instrumentation was developed. The proposed method using the handheld detector involves a rapid response period suitable for issuing early warnings during emergency situations.
  • Conference Object
    Citation - WoS: 1
    Citation - Scopus: 4
    Polymer Nanofiber-Carbon Nanotube Network Generating Circuits
    (SPIE, 2018) Mutlu, Mustafa Umut; Akın, Osman; Yıldız, Ümit Hakan
    The polymer nanofiber carbon nanotube (CNT) based devices attracts attention since they promise high performance for next generation devices such as wearable electronics, ultra-light weighted appliances and foldable devices. This abstract describes the utilization of polymer nanofibers and CNT as major component of low cost foldable photo-resistor. We use polymer nanofiber as template guiding CNTs to generate nanocircuits and conductive sensing network. The controlled combination of CNTs and polymer nanofibers provide opportunities for device miniaturization without loss of performance. The nanofiber-CNT network based photo-resistor exhibits broad band response 400 to 1600 nm that holding promises for ultra-thin devices and new sensing platforms.
  • Conference Object
    Citation - Scopus: 2
    Fabrication of Polymer Nanofiber-Conducting Polymer Fabric and Noncontact Motion Sensing Platform
    (Trans Tech Publications, 2018) Mutlu, Mustafa Umut; Akın, Osman; Demir, Mustafa Muammer; Yıldız, Ümit Hakan
    Conductive polymer-electrospun polymer nanofiber network was combined to host iron oxide nanoparticles providing micrometer thick sensing interface. The sensor has fabricated as freestanding fabric exhibiting 10 to 100 KOhm base resistivity upon bias applied. The moving object has been sensed through the electrostatic interactions between fibers and object. The sensing range has been found to be 1-5 cm above the surface of fabric. By the controlled combination of conductive polymers electrospun polymer nanofibers effective device miniaturization has been provided without loss of performance. The noncontact motion sensor platform has unique flexibility and light weight holding a potential for wearable sensor technology.
  • Article
    Citation - WoS: 44
    Citation - Scopus: 53
    Smart Phone Assisted Detection and Quantification of Cyanide in Drinking Water by Paper Based Sensing Platform
    (Elsevier Ltd., 2017) İncel, Anıl; Akın, Osman; Çağır, Ali; Yıldız, Ümit Hakan; Demir, Mustafa Muammer
    An organometallic dye, europium tetrakis dibenzoylmethide triethylammonium (EuD4TEA) and gold nanoparticles (Au NPs) impregnated paper based sensor platform have been utilized for development of fluorescence turn-on cyanide assay in aqueous media. The ordinary filter paper with 6 μ m pore size were employed as solid support that facilitates impregnation of EuD4TEA and gold nanoparticles and provides durability. Detection mechanism relying on two processes (i) dissolution of gold nanoparticles causing fluorescence recovery and (ii) ligand exchange of triethyl amine with CN group stimulating cyanide specific fluorescence enhancement. The paper platform exhibit naked eye distinguishable color transition upon CN− addition from 10−2 to 10−12 M. To standardize the methodology a homemade image processing algorithm has been developed that enabling calibration of color change and quantify CN− concentration. The described algorithm is applicable to Android smart phones and facilitate transforming these devices into a quantitative cyanide detector. The overall methodology provides instrument free cyanide detection and therefore rapid control of water quality and safety at off-field conditions.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 7
    Utilization of Electrospun Polystyrene Membranes as a Preliminary Step for Rapid Diagnosis
    (John Wiley and Sons Inc., 2016) Işık, Tuğba; Horzum, Nesrin; Yıldız, Ümit Hakan; Liedberg, Bo; Demir, Mustafa Muammer
    Recent advances in clinical practice drive deoxyribonucleic acid (DNA) as an important class of biomarker. Monitoring the change in their concentration suggests the initiation and/or progression of various disorders. However, low quantity of DNA biomarkers in body fluids requires a delicate isolation methodology that provides efficient separation and easy handling. This study describes a newer-generation separation technology relying on electrospun fibers of sub-micrometer diameter of a commodity polymer for DNA biomarkers in simulative serum. Fibrous polystyrene membranes are prepared by electrospinning and they are subjected to post-modification with Au. The composite membranes may provide a convenient environment for the removal of bovine serum albumin (BSA) from BSA and DNA mixtures. The eluent can be used as an efficient tool for detection of DNA biomarkers associated with diagnosis of numerous life-threatening diseases.