Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 9Citation - Scopus: 11Electrospun Polyacrylonitrile (pan)/Polypyrrole (ppy) Nanofiber-Coated Quartz Crystal Microbalance for Sensing Volatile Organic Compounds(Springer, 2023) Yağmurcukardeş, Nesli; İnce Yardımcı, Atike; Yağmurcukardeş, Mehmet; Çapan, İnci; Erdoğan, Matem; Çapan, Rifat; Açıkbaş, YaserIn this study, electrospun polyacrylonitrile (PAN)/polypyrrole (PPy) nanofibers (NFs) coated quartz crystal microbalance (QCM) were investigated for their sensing characteristics against six different volatile organic compounds (VOCs): chloroform, dichloromethane, carbon tetrachloride, benzene, toluene and xylene. SEM, TEM, FT-IR and TGA analysis were carried out for the characterization of PAN/PPy nanofibers and characterization results of PAN/PPy NFs showed that these nanofibers were morphologically well-arranged and straightforward with a cylindrical shape with the average fiber diameter of 253.17 +/- 27 nm. Among all the gas measurement tests, dichloromethane displayed the highest response values for PAN/PPy coated QCM sensors. When the reproducibility of kinetic studies for PAN/PPy NFs coated QCM sensors were examined, the most repetitive results were obtained by this QCM sensor during dichloromethane investigation and the diffusion coefficients of VOCs for the first and second regions increased with the order of xylene < toluene < benzene < carbontetrachloride < chloroform < dichloromethane. The sensitivities of the PAN/PPy nanofibers-coated QCM sensor against organic vapors are determined between 4.71 and 6.17 (Hz ppm(-1)) x 10(-4). As a result, PAN/PPy nanofibers exhibited high sensitivity and selectivity for VOCs sensor applications, especially for dichloromethane.Article Citation - WoS: 17Citation - Scopus: 20Electrospun Polyacrylonitrile (pan) Nanofiber: Preparation, Experimental Characterization, Organic Vapor Sensing Ability and Theoretical Simulations of Binding Energies(Springer, 2022) İnce Yardımcı, Atike; Yağmurcukardeş, Nesli; Yağmurcukardeş, Mehmet; Çapan, İnci; Erdoğan, Matem; Çapan, Rıfat; Tarhan, Özgür; Açıkbaş, YaserIn this study, polyacrilonitrile (PAN) nanofibers obtained by electrospinning were directly coated on the surface of a quartz crystal microbalance (QCM) and were investigated for their sensing characteristics against chloroform, dichloromethane and carbon tetrachloride as volatile organic compounds (VOCs). PAN nanofibers were characterized by SEM, DSC, Raman Spectroscopy, and FT-IR and the results indicated that beadless and regular nanofibers with the average diameter of 182.7 ± 32 nm were obtained. Kinetic measurements indicated that electrospun PAN nanofibers were sensitive to the VOCs and they were appropriate for sensing applications of chlorine compounds. The reproducibility of PAN nanofiber sensor was also shown in this study. The results revealed that the diffusion coefficients of VOCs increased with the order carbontetrachloride < dichloromethane < chloroform which was supported by the density functional theory (DFT) simulations that revealed the highest binding energy for chloroform.Article Citation - WoS: 35Citation - Scopus: 37Modification of Ito Surface Using Aromatic Small Molecules With Carboxylic Acid Groups for Oled Applications(Elsevier Ltd., 2011) Havare, Ali Kemal; Can, Mustafa; Demiç, Şerafettin; Okur, Salih; Kuş, Mahmut; Aydın, Hasan; Yağmurcukardeş, Nesli; Tarı, Süleyman4-[(3-Methylphenyl)(phenyl)amino]benzoic acid (MPPBA) was synthesized in order to facilitate the hole-injection in Organic Light Emitting Diodes (OLED). MPPBA was applied to form self-assembled monolayer (SAM) on indium tin oxide (ITO) anode to align energy-level at the interface between organic semiconductor material (TPD) and inorganic anode (ITO) in OLED devices. The modified surface was characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). KPFM was used to measure the surface potential and work function between the tip and the ITO surface modified by SAM technique using MPPBA. The OLED devices (ITO/MPPBA/TPD/Alq3/Al) fabricated with SAM-modified ITO substrates showed lower turn-on voltages and enhanced diode current compare to the OLED devices fabricated with bare ITO substrates.