Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

1996 - 199922000 - 200923

Settings

End date: 2009Institution Author: search.filters.institutionAuthor.Tıhmınlıoğlu, Funda

Search Results

Now showing 1 - 10 of 25
  • Article
    Citation - WoS: 8
    Citation - Scopus: 9
    Polymeric Thermal Analysis of C+h and C+h+ar Ion Implanted Uhmwpe Samples
    (Elsevier Ltd., 2007) Kaya, N.; Öztarhan, Ahmet M.; Urkaç, Emel Sokullu; Ila, D.; Budak, S.; Oks, E.; Tıhmınlıoğlu, Funda; Muntele, C.
    Chemical surface characterization of C + H hybrid ion implanted UHMWPE samples were carried out using DSC (differential scanning calorimeter) and TGA (thermal gravimetric analysis) techniques. Samples were implanted with a fluence of 10(17) ion/cm(2) and an extraction voltage of 30 kV. The study of TGA and DSC curves showed that: (1) Polymeric decomposition temperature increased, (2) T-m, Delta C-p and Delta H-m values changed while Delta C-p and Delta H-m increased. T-g value could not be measured, because of some experimental limitations. However, the increase in Delta H-m values showed that T-g values increased, (3) the branch density which indicated the increase in number of cross-link (M-c) decreased in ion implanted samples and (4) increase in Delta H-m values indicated increase in crystallinity of implanted surface of UHMWPE samples.
  • Conference Object
    Structural and Thermal Characterization of Ti+o Ion Implanted Ultrahigh Molecular Weight Polyethylene (uhmwpe)
    (American Institute of Physics, 2009) Öztarhan, Ahmet; Urkaç Sokullu, Şadiye Emel; Tıhmınlıoğlu, Funda; Kaya, N.; Ila, Daryush; Budak, S.; Nikolaev, A.
    In this work, Metal-Gas Hybrid Ion Implantation technique was used as a tool for the surface modification of Ultra High Molecular Weight Polyethylene (UHMWPE). Samples were Ti + O ion implanted by using Metal-Vapour Vacuum Arc (MEVVA) ion implanter to a fluence of 5x10(16) ion/cm(2) for each species and extraction voltage of 30 kV. Untreated and surface treated samples were investigated by Rutherford Back Scattering (RBS) Spectrometry, Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR) Spectroscopy, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Results indicate that Ti + O ion implantation can be applied on UHMWPE surfaces successfully. ATR-FTIR spectra indicate that the C-H concentration on the surface decreased after Ti + O implantation. Thermal characterization with TGA and DSC shows that polymeric decomposition temperature is shifted after ion implantation.
  • Conference Object
    Citation - Scopus: 4
    Trans-resveratrol’ün Kitosan Mikroküreler İçerisindeki Kararlılığı
    (Institute of Electrical and Electronics Engineers Inc., 2009) Altıok, Duygu; Altıok, Evren; Bayraktar, Oğuz; Tıhmınlıoğlu, Funda
    trans-Resveratrol, (3,5,4?-trihydroxy-trans-stilbene), a phenolic compound present in some plant species, have been shown to posses antioxidative, anticarcinogenic and antitumour properties. However, under UV light, it turns into -cis form and looses its bioactivity.This study aims to increase the stability of trans-resveratrol by loading it into chitosan microspheres. Within this context, the trans-resveratrol loaded chitosan microspheres was produced by spray drying and then the resultant microspheres were characterized. The particle size and the surface morphology of resultant microspheres were investigated by scanning electron microscope (SEM) and the thermal properties were determined by thermogravimetry analyser(TGA). The stability of free and that of inside the microspheres was determined by high performance liquid chromatography (HPLC). It was found that the stability of trans-resveratrol incorporated into chitosan microspheres kept constant. ©2009 IEEE.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 7
    Effect of the Zeolite Filler on the Thermal Degradation Kinetics of Polypropylene
    (Scibulcom Ltd., 2006) Tıhmınlıoğlu, Funda; Pehlivan, Hilal; Balköse, Devrim; Ülkü, Semra
    In this study, the thermal degradation behaviour of polypropylene (PP) and polypropylene-zeolite composites was investigated. Clinoptilolite, a natural zeolitic tuff, was used as the filling material into the composites. Effect of both pure clinoptilolite and silver ion exchanged form of clinoptilolite addition on the thermal degradation kinetics of polypropylene composites was studied by using differential scanning calorimetry (DSC) and thermal gravimetry analysis (TGA) techniques. Polymer degradation was evaluated by using DSC with heating rates of 5, 10, and 20 degrees C/ min from room temperature up to 500 degrees C. Silver concentration (4.36, 27.85 and 183.8 mg Ag/g zeolite) was the selected parameter under consideration. From the DSC curves, it was observed that the heat of degradation values of the composites containing 2-6% silver exchanged zeolites (321-390 kJ/kg) were larger compared to that of the pure PP free of silver and zeolite (258 kJ/kg). From the DSC results it was confirmed that PP-zeolite composites can be used at higher temperatures compared to the pure PP polymer because of its higher thermal stability. The thermal decomposition activation energies of the composites were calculated by using both the Kissenger and Ozawa models. The values predicted from these two equations were in close agreement. From the TGA curves, it was found that zeolite addition into the PP matrix speeds down the decomposition reaction, however, silver exchanged zeolite addition into the matrix accelerates the reaction. The higher the silver concentration, the lower the thermal decomposition activation energies were obtained. As a result, PP was found to be much more susceptible to thermal decomposition in the presence of silver exchanged zeolite.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 10
    Water and Water Vapor Sorption Studies in Poly(propylene)-Zeolite Composites
    (John Wiley and Sons Inc., 2003) Pehlivan, Hilal; Özmıhçı, Filiz; Tıhmınlıoğlu, Funda; Balköse, Devrim; Ülkü, Semra
    Water and water vapor sorption to porous poly(propylene)zeolite composites prepared by hot pressing have been studied as a function of zeolite loading. This work presents the first report on the effect of the zeolite as a filler on the water sorption properties of PP composites. Water swelling experiments were conducted at 25°C using pure PP and PP-zeolite film samples having different zeolite loadings (6-40 wt%). Since PP is a hydrophobic polymer, it does not sorp any water, but the composites having 10, 20, 30, and 40% zeolite sorbed 0.63, 1.00, 1.72 and 3.74 wt% water, respectively. The zeolite itself at the same conditions sorbed 24.5 wt% water. As the filler loading in the composites increased, equilibrium uptake values increased too. On the other hand, water vapor sorption and kinetics has been studied using a Cahn 2000 gravimetric sorption system. Within in the range 0.35-0.95%, water vapor was adsorbed by the composites containing 10-40 wt% zeolite. Experimental effective water vapor diffusivities of the composite films were about one order of magnitude higher than the experimental water diffusion coefficient in composites. The transport of water in composites was slower than that in the liquid water due to the longer diffusion pathway and adsorption on the surface of the composites. Although the liquid water may fill all the voids in the composite, water vapor is adsorbed on the surface of the zeolite only.
  • Article
    Citation - WoS: 8
    Citation - Scopus: 8
    Phase Equilibrium and Diffusion of Solvents in Polybutadiene: a Capillary-Column Inverse Gas Chromatography Study
    (John Wiley and Sons Inc., 2002) Cai, W. D.; Ramesh, N.; Tıhmınlıoğlu, Funda; Danner, Ronald P.; Duda, John Larry; De Haan, A.
    The capillary-column inverse gas chromatography method was used to measure the diffusion and partition coefficients of ethylbenzene, styrene, and acrylonitrile in polybutadiene (PBD) at infinite dilution of the solvents. Experiments were performed over a temperature range of 50-125°C. At temperatures well above the glass-transition temperature of PBD, the diffusivities were correlated using an Arrhenius expression. The Arrhenius parameters in turn were intercorrelated and shown to be a function of the occupied volume, thus providing a method for predicting the diffusion of other solvents in the same polymer. Further, the activation energy was predicted using the Duda-Vrentas free-volume approach. The activation energy thus obtained was compared with the activation energy of the Arrhenius approach. The weight-fraction activity coefficient data were compared to the predictions of the group contribution, lattice-fluid equation-of-state, and the UNIquac Functional-group Activity Coefficient (UNIFAC) free-volume models.
  • Article
    Citation - WoS: 11
    Citation - Scopus: 13
    Sorption and Diffusion of Water Vapour on Edible Films
    (Springer Verlag, 2008) Berkün, Didem; Balköse, Devrim; Tıhmınlıoğlu, Funda; Alsoy Altınkaya, Sacide
    Two types of films consisting of sodium salt of carboxymethyl cellulose (NaCMC) and hydroxypropyl cellulose (HPC) as film forming materials and glycerin as plasticizer were prepared, characterized and their water vapour sorption properties were determined. The water sorption isotherms of the films were measured using a magnetic suspension balance. Results show that diffusion of water vapour in NaCMC based film is faster than that in HPC based films, due to the heterogeneous structure and larger pore dimensions of the NaCMC films.
  • Article
    Citation - WoS: 44
    Citation - Scopus: 54
    Protection of Marble Surfaces by Using Biodegradable Polymers as Coating Agent
    (Elsevier, 2009) Ocak, Yılmaz; Sofuoğlu, Aysun; Tıhmınlıoğlu, Funda; Böke, Hasan
    Biodegradable polymers have been replaced over the synthetic polymers in many applications due to their good properties such as reversibility and biodegradability. Therefore they allow new treatment on the surface of the material to be protected and they fulfil the principles generally accepted by the International Conservation Community of Historic Monuments and Buildings. In this study, the efficiency of four different biodegradable polymers as protective coatings on marble-SO2 reaction was investigated. The polymers used were zein, chitosan, polyhydroxybutyrate (PHB), and poly-l-lactide (PLA). The mineralogical composition, bulk density and porosity of uncoated marble were determined. The water vapor permeability, water absorption by capillary forces, surface wettability, and color alteration of uncoated and coated marbles were measured. For sulphation reaction, marble slabs were coated with these polymers and then they were exposed at nearly 8 ppm SO2 concentration at 100% relative humidity conditions together with uncoated ones in a reaction chamber for several days for testing their protection efficiency. The extent of reaction was determined by leaching of gypsum formed on the marble surfaces in deionized water and then determining the sulphate content by ion chromatography. The protection efficiency of polymer treatments was expressed as comparing the gypsum crust thickness of the coated and uncoated marble plates. The comparison among the polymers showed that the surface hydrophobicity, water capillary absorption and structure of polymer would be important factors affecting the protection efficiency. The use of high molecular weight PLA (HMWPLA) polymer on marble surfaces provided significant protection up to 60% which was indicated that HMWPLA polymer seems to be promising polymer as protective coating agent in reducing gypsum formation on marble surfaces in the polluted environment.
  • Article
    Citation - WoS: 14
    Citation - Scopus: 17
    The Effects of Natural Zeolite and Silane Coupling Agents on Melting and Crystallization Behaviour of Polypropylene
    (Springer Verlag, 2008) Başalp, Dildare; Tıhmınlıoğlu, Funda
    The thermal characterization of polypropylene (PP) composites containing untreated and treated zeolite with different silane coupling agents was carried out using thermogravimetric analysis (TG) and differential scanning calorimetry (DSC) to investigate the effects of natural zeolite and surface modifiers on melting, crystallization and degradation behaviour of PP. 3- aminopropyltriethoxysilane (AMPTES), methyltriethoxysilane (MTES) and 3-mercaptopropyltrimethoxysilane (MPTMS) were used as surface modifiers at four different concentrations (0.5-2.0 mass%). Thermal analyses indicated that silane treatment and 2-6 mass% zeolite addition have no significant effect on the melting and degradation temperatures of the composites. The crystallization temperatures of the composites were increased due to the nucleating effect of the zeolite. The influence of the modifiers on the interactions between PP and zeolite was determined by the activities of untreated and treated zeolite. The maximum interactions leading to good adhesion were observed in the AMPTES treated composites. Also, non-isothermal crystallization kinetics of the composites was analyzed using Avrami and Kissinger models.
  • Article
    Citation - WoS: 11
    Citation - Scopus: 13
    Water Vapour Barrier Performance of Corn-Zein Coated Polypropylene (pp) Packaging Films
    (Springer Verlag, 2008) Atik, İsa Doğan; Özen, Fatma Banu; Tıhmınlıoğlu, Funda
    The novel film structure of corn-zein coated on polypropylene (PP) synthetic film for packaging industry was developed to examine the feasibility of resulting coated films as an alternative water barrier performance for food packaging. The effects of coating formulation (solvent, corn-zein, plasticizer concentration and plasticizer type) on final properties of films were observed. Corn-zein is the most important protein of corn and has good film forming property. Composites structures of PP films coated with corn-zein were obtained through a simple solvent casting method. Polyethylene glycol (PEG) and glycerol (GLY) were used as plasticizer to increase film flexibility. Statistical analysis based on full factorial design was performed to observe coating formulation effects. The high water vapour barriers were obtained for films coated with coating formulation consisting of higher amounts of corn-zein plasticized by GLY. The lower glass transition temperatures (T g) of films were obtained by plasticization of films and T g decreased by increasing plasticizer content. The statistical analysis defined the key parameters of coating formulation that had major effects on the final properties of coated PP films as corn-zein, plasticizer concentration and plasticizer type. In conclusion, corn-zein coatings could have potential as an alternative to conventional synthetic polymers used in composite multilayer structures for food packaging applications.