Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
149 results
Search Results
Now showing 1 - 10 of 149
Article Citation - WoS: 1Citation - Scopus: 1Socio-Economic and Development Disparities Over the Long-Run: Exploring Spatial Heterogeneities in the Case of Turkey(Hungarian Central Statistical Office, 2024) Duran, Hasan Engin; Cifci, Burcu Degerli; Karabakan, Berfin; Dogan, FehmiThe aim of this paper is to explore the evolution of socioeconomic development and income disparities and convergence patterns across Turkish provinces, emphasizing the impact of spatial heterogeneities. We propose two types of contributions to the literature. First, most of the studies that apply the 13- convergence method presume a unique 13 parameter, assuming that all regions homogenously converge to the steady state at the same pace. However, we argue that relaxing this assumption by way of considering spatial heterogeneities might be more informative. Second, we provide a simple solution to a severe problem: The neoclassical model assumes a monotonic saddle path along which economic fluctuations are not considered, which might be particularly influential with regard to convergence when the time span is too short to capture long-term evolution. Many empirical studies cover only short periods, which may be easily dominated by recessions or expansions, significantly biasing the results. To overcome this problem, we look into two datasets covering long periods (1963-2017 and 1975-2021). Having applied various empirical methods, such as spatial regressions, GWR and nonparametric regressions, we obtain several results. First, at the country level, there is empirical evidence of regional convergence and decreasing development inequalities. Second, however, this convergence process is not valid in all areas. We conclude that there is nonnegligible spatial heterogeneity that should be taken into account in such analyses.Article Art and Construction Related Qualities of 14th‒15th Century Monuments in a Rural Landscape on the Western Coast of Türkiye(KeAi Communications Co., 2024) Hamamcıoğlu Turan, Mine; Aktaş, Engin; Toköz, Özge DenizThis study aims to contribute to the understanding of the evolution of art and construction in the early settlements established by Turkish communities on the far west Asian coast by focusing on two developed examples in Urla Peninsula. Conventional surveying and evaluation techniques of architectural restoration and civil engineering were utilized. Key findings include the understanding of the hierarchy of rural settlements in the studied landscape: old Çesme the most developed village of peninsula in the 16th century. It was positioned along a valley in distance to coast, but in control of harbor that played significant role in commerce between Europe and Asia. Its mosque and tomb, dated to late 14th – early 15th centuries, used to crown it. Cylindrical minaret tower of mosque, domed tomb tower on a cubical base and squinch in the transition zone of mosque are evidences for Central Asian roots. Usage of local lime stone, re-usage of andesite blocks, framing of the stone blocks with bricks, and pendentive in tomb refer to Roman-Byzantine constructions. The study presents the development of Turkish art and construction on the far west Asian coast in the 14th‒15th centuries. Findings will be a guide for related conservation management in similar contexts. © 2024 The Author(s)Article Citation - WoS: 20Citation - Scopus: 17Optimizing Thermal Comfort in Physical Exercise Spaces: a Study of Spatial and Thermal Factors(Elsevier, 2024) Avcı, Ali Berkay; Balcı, Görkem Aybars; Başaran, TahsinFitness centers have become famous for maintaining a healthy lifestyle. They require different thermal comfort conditions and higher fresh air supply rates than other indoor spaces. However, even well-designed centers may cause discomfort due to factors such as design decisions, ventilation, overheating, and overcrowding. The standards for fitness centers do not consider these specific requirements sufficiently, so this study focuses on understanding the thermal comfort requirements during physical exercise and evaluating spatial and thermal factors affecting the thermal environment around the body. The study investigated the ceiling height, lateral and frontal distances between machines, and vent locations as spatial factors and inlet temperature and air velocity as thermal factors. A thirty-minute moderate-intensity constant work rate exercise test was conducted in a controlled climatic chamber using a cycle ergometer with six healthy male participants. The experiment conditions were simulated in CFD software using the collected data. Once a validated simulation model was provided, computational models for different environmental and spatial scenarios for the five-person cycling class were generated. Using Taguchi L9 (34) orthogonal arrays method, nine spatial scenarios were simulated with three different thermal operations each. Optimal factor levels were determined by using thermal comfort conditions (based on predicted mean vote) around the body's thermal plume. The results showed that a ceiling height of 5 m, lateral and frontal distances of 1 m and 0.5 m between machines, and Type 2 (two inlets mounted on the ceiling) ventilation strategy were optimal for achieving better thermal comfort values in a thermal condition of 18 °C and 0.2 m·s−1. The study found that increasing the ceiling height and using cross-positioned vents that project air vertically from the ceiling improved the comfort conditions significantly. It is expected that these criteria, which were determined, compared with the standards and detailed, will contribute to the production processes of comfortable exercise spaces.Article An Attempt To Read the Change in Aesthetics by Reading Deleuze: the Iaa and Sanart Conferences on Aesthetics(Universidad de Oviedo, 2023) Kök, Saadet; Akpınar, İpekAs a result of processes such as social-political and environmental crises, globalization and innovative technological developments, which are evaluated on the basis of speed and urgency, we are faced with a result-oriented, reductionist, ethical and aesthetic world. This work reveals the relationship between aesthetics and the changing world. In this context, this study, which focuses on the themes of the International Aesthetics Association (IAA) and Aesthetics and Visual Culture Association (SANART) congresses, reads the relationship of aesthetics with our changing world through Gilles Deleuze's 'philosophy of difference'. In this framework, the study chronologically analyzes the relationship between themes and the call for congress papers with Deleuze's terms. The study evaluates the conceptual framework of the congresses of SANART and IAA associations, corresponding to Deleuze's concept of 'system'. The events organized by each association at regular intervals are the 'series' that make up the systems. In this context, the study reads the concepts both in the series they belong to and in their verbal identities in other series. In other words, the study, which analyzes the dynamic and static repetitions of the concepts in congress themes and call texts, questions the fields of external and conceptual difference. The data obtained in this study were categorized and interpreted as series, horizontal series and vertical series.Article Citation - WoS: 5Citation - Scopus: 5De-Sealing Reverses Habitat Decay More Than Increasing Groundcover Vegetation(MDPI, 2023) Couch, Virginia; Salata, Stefano; Saygın, Nicel; Frary, Anne; Arslan, BertanModeling ecosystem services is a growing trend in scientific research, and Nature-based Solutions (NbSs) are increasingly used by land-use planners and environmental designers to achieve improved adaptation to climate change and mitigation of the negative effects of climate change. Predictions of ecological benefits of NbSs are needed early in design to support decision making. In this study, we used ecological analysis to predict the benefits of two NbSs applied to a university masterplan and adjusted our preliminary design strategy according to the first modeling results. Our Area of Interest was the IZTECH campus, which is located in a rural area of the eastern Mediterranean region (Izmir/Turkey). A primary design goal was to improve habitat quality by revitalizing soil. Customized analysis of the Baseline Condition and two NbSs scenarios was achieved by using local values obtained from a high-resolution photogrammetric scan of the catchment to produce flow accumulation and habitat quality indexes. Results indicate that anthropogenic features are the primary cause of habitat decay and that decreasing imperviousness reduces habitat decay significantly more than adding vegetation. This study creates a method of supporting sustainability goals by quickly testing alternative NbSs. The main innovation is demonstrating that early approximation of the ecological benefits of NbSs can inform preliminary design strategy. The proposed model may be calibrated to address specific environmental challenges of a given location and test other forms of NbSs.Article Eğitim yapılarında asansör trafik analizi yöntemlerinin karşılaştırılmasına yönelik bir araştırma(Gazi Üniversitesi, 2023) Deligöz, Dostcan; Harputlugil, TimuçinPurpose: Regarding elevator design in educational buildings; It is aimed to investigate the legal framework, to integrate dynamic simulation programs to design process, to compare traditional and dynamic simulation methods, to evaluate the adequacy of elevator features specified in the legislation and to determine the optimum scenarios according to the minimum requirements.Theory and Methods: Based on the findings of the literature review, which examines the issue of elevator traffic analysis together with the legislation and regulations, the carrying capacities of the elevators in the educational buildings designed by the Ministry of National Education (MNE) are tested. The stability of the system is tested by analyzing the conditions where only the disabled, disabled and building workers can be used together and all building users can use the elevators with the dynamic simulation method (with Elevate Software). The limits of the system are determined based on the waiting times during the peak usage periods. The findings of the study are evaluated according to the waiting times determined by CIBSE Guide D and the Chamber of Mechanical Engineers followed by the discussion of the outcomes.Results: The issue of elevator design has been overlooked in educational buildings, and a comprehensive elevator traffic analysis method has not been defined. For the effective use of all occupants, elevator design should be handled comprehensively with considering potentials of dynamic simulation method.Conclusion: According to the findings of the study, it is noted that the number and capacity of elevators in the legislation for educational buildings are determined only for minimum conditions and for disabled users. In addition, the legislation (considering calculation methodology) is not specific for educational buildings but related with buildings in general with public use. Considering the occupants, and their profiles of the educational buildings, a more comprehensive traffic analysis with the dynamic simulation method may enable the elevators to be designed and to be used more efficiently.Article Citation - WoS: 3Citation - Scopus: 5Deterioration of Pre-War and Rehabilitation of Post-War Urbanscapes Using Generative Adversarial Networks(SAGE Publications, 2023) Çiçek, Selen; Turhan, Gözde Damla; Taşer, AybükeThe urban built environment of contemporary cities confronts a constant risk of deterioration due to natural or artificial reasons. Especially political aggression and war conflicts have significant destructive effects on architectural and cultural heritage buildings. The post-war urbanscapes demonstrate the striking effects of the armed conflicts during the hot war encounters. However, the residues of the urbanscapes become the actual indicators of damage and loss. Since today we can make future predictions using a variety of machine learning algorithms, it is possible to represent hybrid projections of urban heterotopias. In this context, this research proposes to explore dystopian post-war projections for modern cities based on their architectural styles and demonstrate the utopian scenarios of rehabilitation possibilities for the damaged urban built environment of post-war cities by using generative adversarial network (GAN) algorithms. Two primary datasets containing the post-war and pre-war building facades have been given as the input data for the CycleGAN and pix2pix GAN models. Thus, two different image-to-image GAN models have been compared regarding their ability to produce legible building facade projections in architectural features. Besides, the machine learning process results have been discussed in terms of cities' utopian and dystopian future predictions, demonstrating the war conflicts' immense effects on the built environment. Moreover, the immediate consequence of the destructive aggression on tangible and intangible architectural heritage would become visible to inhabitants and policymakers when the AI-generated rehabilitation potentials have been exposed.Article Citation - WoS: 1On-Site Measurements of Temperature and Humidity Conditions for the Comparison of Urban and Rural Sub-Spaces of Traditional Settlements: Historical City of Mugla, Turkey(Taylor & Francis, 2023) Timur, Barış Ali; Başaran, Tahsin; İpekoğlu, BaşakOne of the significant processes that ensures realistic determination of the energy needs of historical buildings is case-specific definition of their local microclimatic conditions. Accordingly, the aim of this study is to determine differences for the parameters of temperature and humidity in urban and rural sub-settlements of the historical city, Mugla/Turkey. Study method consists of on-site measurements of these variables in sub-settlements for comparisons. As a result, it was identified urban zone shows heat island characteristics with warmer, drier, and more stable conditions; while rural sub-settlement remains cooler, more humid, and more erratic. In parallel, calculated extents of these differences demonstrate the significance and necessity of on-site measurements and consequential microclimatic zoning of historical cities as conservation/planning tools for responding to the thermal needs of architectural heritage. A key application of these processes would be the establishment of local databases of case-specific weather data to be used in thermal simulation assessments.Article Citation - WoS: 10Citation - Scopus: 14Out-Of Seismic Performance of Bed-Joint Reinforced Autoclaved Aerated Concrete (aac) Infill Walls Damaged Under Cyclic In-Plane Displacement Reversals(Elsevier, 2023) Halıcı, Ömer Faruk; Demir, Uğur; Zabbar, Yassin; İlki, AlperThe infill walls made of Autoclaved Aerated Concrete (AAC), which is a lightweight, fire resistant and energy efficient material, provide effective insulation solutions for building types of structures and becoming more and more popular in earthquake prone regions. Although the number of experimental tests examining the seismic response of clay brick infills is extensive, the amount of prior research on infill walls built of AAC blocks is rather limited. Past research revealed that the use of bed-joint reinforcement is one of the promising solutions to improve the global seismic response of masonry walls by enhancing strength and displacement capacity. In this study, the out-of-plane (OOP) seismic performance of AAC infill walls with flat-truss and innovative cord-type bed-joint reinforcement is experimentally evaluated. Also, consideration is given to the prior in-plane (IP) damage, which was found to degrade the seismic performance of infills in OOP direction. For this purpose, three IP and four OOP, in total, seven experimental tests were performed on four full-scale AAC infill wall specimens. The test parameters were selected in such a way as to make it possible to parametrically compare the OOP performance of AAC infills with flat-truss and cord-type bed-joint reinforcements with unreinforced AAC infill walls, together with the effect of prior IP damage on the OOP response of unreinforced AAC infill walls. It was found that the use of innovative cord-type bed-joint reinforcement improved the OOP strength to a similar extent to what was obtained from the truss-type reinforced specimen. In terms of ultimate displacement and energy dissipation capacity enhancement, the specimen with cord-type reinforcement performed better. In addition, the damages formed due to IP cyclic displacement reversals up to 0.005 drift ratio, which is defined as the drift limit for buildings with brittle infill walls in certain design codes, resulted in a significant reduction in the OOP strength and stiffness properties of AAC infills. The theoretical OOP strength calculations were found to provide unconservative strength values for the IP-damaged specimens.Article Citation - WoS: 5Citation - Scopus: 6An Investigation of the Design Process's Effect on a High-Performance Building's Actual Energy System Performance(Ios Press, 2022) Terim Çavka, Belgin; Çavka, Hasan Burak; Salehi, M. MahdiThe design intent and the performance targets of projects may sometimes fail to match a building's actual post-occupancy performance. The mismatch of intended and actual building performance can be attributed to multifarious reasons. This study focuses on the role of project decisions made during design as one of the reasons of shortfall. The aim of the study is to unveil the design decision-making process of a state-of-the-art research building through the analysis of project's available set of IDP (Integrated Design Process) documentation. To understand the relationship and correlation between the energy performance gap and the decision-making process of the case building, we investigated the design decisions' effect on the actual performance. The particular emphasis is on the decisions that were based on assumptions rather than measured actual test data for the proposed innovative building systems. The designed heat recovery system, which was dependent on recovered heat from the neighboring research building, had a significant effect on the building's poor energy performance. We investigated collected project data from coordination meetings, thoroughly analyzed project documentation, and quantified the building's actual energy performance data. The analysis of the project information shows the ripple effect of decisions that were made based on assumptions, that triggered shortfalls in the building's overall actual performance. Our qualitative analysis indicates that the poor system performance during operations was related with the design decisions that were not based on the measurement of the actual performance of the existing systems in the neighboring building. The performance of the heat recovery from the neighboring building as a highly dependent Energy Conservation Measure (ECM) analyzed through collected documents and data. The ambiguity of the available heat potential from the neighboring building and related testing issues defined on an explanatory timeline of process coding. The conclusion includes recommendations for the design decision-making process for innovative system integrations for high-performance buildings, and underlines the importance of IDP for complex buildings.