Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 5Citation - Scopus: 6Fabrication of Gelatin-Polyester Based Biocomposite Scaffold Via One-Step Functionalization of Melt Electrowritten Polymer Blends in Aqueous Phase(Elsevier B.V., 2024) Köksal,B.; Kartal,R.B.; Günay,U.S.; Durmaz,H.; Yildiz,A.A.; Yildiz,Ü.H.The rapid manufacturing of biocomposite scaffold made of saturated-Poly(ε-caprolactone) (PCL) and unsaturated Polyester (PE) blends with gelatin and modified gelatin (NCO-Gel) is demonstrated. Polyester blend-based scaffold are fabricated with and without applying potential in the melt electrowriting system. Notably, the applied potential induces phase separation between PCL and PE and drives the formation of PE rich spots at the interface of electrowritten fibers. The objective of the current study is to control the phase separation between saturated and unsaturated polyesters occurring in the melt electro-writing process and utilization of this phenomenon to improve efficiency of biofunctionalization at the interface of scaffold via Aza-Michael addition reaction. Electron-deficient triple bonds of PE spots on the fibers exhibit good potential for the biofunctionalization via the aza-Michael addition reaction. PE spots are found to be pronounced in which blend compositions are PCL-PE as 90:10 and 75:25 %. The biofunctionalization of scaffold is monitored through C[sbnd]N bond formation appeared at 400 eV via X-ray photoelectron spectroscopy (XPS) and XPS chemical mapping. The described biofunctionalization methodology suggest avoiding use of multi-step chemical modification on additive manufacturing products and thereby rapid prototyping of functional polymer blend based scaffolds with enhanced biocompatibility and preserved mechanical properties. Additionally one-step additive manufacturing method eliminates side effects of toxic solvents and long modification steps during scaffold fabrication. © 2024 Elsevier B.V.Article Citation - WoS: 8Citation - Scopus: 9Enhancing Wound Regeneration Potential of Fibroblasts Using Ascorbic Acid-Loaded Decellularized Baby Spinach Leaves(Springer, 2024) Dikici, SerkanDecellularization of plant tissues is an emerging route to fabricate scaffolds for tissue engineering and regenerative medicine. Although significant progress has been made in the field of plant tissue decellularization, functionalization of plant scaffolds is still an emerging field, and loading them with L-ascorbic acid to promote skin regeneration has not yet been reported. L-ascorbic acid is an antioxidant that plays a key role in collagen synthesis as a cofactor of lysyl hydroxylase and prolyl hydroxylase. It has been shown to have significant importance in physiological wound healing by stimulating fibroblasts to produce collagen at both the molecular and the genetic levels. In this work, we aimed to fabricate an ascorbic acid-releasing bioactive scaffold by introducing a stable form of ascorbic acid, L-ascorbic acid 2-phosphate (AA2P), into decellularized baby spinach leaves and investigated its biological activity in vitro. Our results demonstrated that AA2P could be easily introduced into decellularized baby spinach leaf scaffolds and subsequently released within the effective dose range. AA2P-releasing baby spinach leaves were found to increase metabolic activity and enhance collagen synthesis in L929 fibroblasts after 21 days. In conclusion, this study demonstrated the fabrication of a novel functionalized skin tissue engineering scaffold and made a significant contribution to the fields of plant decellularization and skin tissue engineering.Book Part Citation - Scopus: 2Bioprinting of Hydrogels for Tissue Engineering and Drug Screening Applications(Elsevier, 2022) Özmen, Ece; Yıldırım, Özüm; Arslan Yıldız, AhuIn tissue engineering, the 3-dimensional (3D) bioprinting method that enables the production of 3D structures by combining bioinks and cells has become one of the most promising technique. Over the last few years, 3D cell culture models gained importance in the development of disease model and drug development studies. The successful production of the 3D structures by 3D bioprinting mostly depends on the properties of the bioink to be used. Hydrogels, which are natural or synthetic polymers, are generally preferred as bioink materials with their high swelling ability, biocompatibility, biodegradability, and easy gelation ability. The convenience of hydrogels for varied bioprinting applications make them proper bioink materials for bioprinting of artificial tissues, tumor models, and tissue grafts. Bioprinting of functional tissues is successfully performed for years, and hydrogels are utilized as bioink in bone, vascular, neural, cartilage, cardiac, skin tissue engineering, and drug screening. In this chapter, bioprinting methodology, bioinks, hydrogel bioinks, and their applications are discussed in detail. © 2023 Elsevier Inc. All rights reserved.Book Part Citation - Scopus: 3Tissue Engineering Applications of Marine-Based Materials(Springer, 2022) Polat, Hürriyet; Zeybek, Nuket; Polat, MehmetTissue engineering is a promising approach in replacing or improving tissues lost or has become nonviable due to disease or trauma by the use of scaffold materials by combining engineering and biochemical/physicochemical methods. Its purpose is to create suitable matrices that support cell differentiation and proliferation toward the formation of new and functional tissue. Marine-based natural compounds are potential scaffold feedstock material in tissue engineering owing to their biocompatibility and biodegradability while providing excellent biochemical/physicochemical properties. Numerous application areas and various fabrication routes techniques described in the literature attest to the importance of these materials in tissue regeneration. This review has been carried to merge the information from a large number of studies on the marine-based scaffold materials in tissue engineering into a coherent summary. © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2022.Article Citation - WoS: 3Citation - Scopus: 4Applicability of Low-Intensity Vibrations as a Regulatory Factor on Stem and Progenitor Cell Populations(Bentham Science Publishers, 2020) Baskan, Öznur; Karadaş, Özge; Meşe, Gülistan; Özçivici, EnginPersistent and transient mechanical loads can act as biological signals on all levels of an organism. It is therefore not surprising that most cell types can sense and respond to mechanical loads, similar to their interaction with biochemical and electrical signals. The presence or absence of mechanical forces can be an important determinant of form, function and health of many tissue types. Along with naturally occurring mechanical loads, it is possible to manipulate and apply external physical loads on tissues in biomedical sciences, either for prevention or treatment of catabolism related to many factors, including aging, paralysis, sedentary lifestyles and spaceflight. Mechanical loads consist of many components in their applied signal form such as magnitude, frequency, duration and intervals. Even though high magnitude mechanical loads with low frequencies (e.g. running or weight lifting) induce anabolism in musculoskeletal tissues, their applicability as anabolic agents is limited because of the required compliance and physical health of the target population. On the other hand, it is possible to use low magnitude and high frequency (e.g. in a vibratory form) mechanical loads for anabolism as well. Cells, including stem cells of the musculoskeletal tissue, are sensitive to high frequency, low-intensity mechanical signals. This sensitivity can be utilized not only for the targeted treatment of tissues, but also for stem cell expansion, differentiation and biomaterial interaction in tissue engineering applications. In this review, we reported recent advances in the application of low-intensity vibrations on stem and progenitor cell populations. Modulation of cellular behavior with low-intensity vibrations as an alternative or complementary factor to biochemical and scaffold induced signals may represent an increase of capabilities in studies related to tissue engineering.