Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Now showing 1 - 4 of 4
Article Citation - WoS: 165Citation - Scopus: 174Heterogeneous Fenton-Like Degradation of Rhodamine 6g in Water Using Cufezsm-5 Zeolite Catalyst Prepared by Hydrothermal Synthesis(Elsevier Ltd., 2010) Dükkancı, Meral; Gündüz, G.; Yılmaz, Selahattin; Prihod’ko, R. V.In this study, heterogeneous Fenton-like degradation of reactive azo dye Rhodamine 6G in water was investigated over a CuFeZSM-5 zeolite catalyst prepared by hydrothermal synthesis. At initial pH of 3.4, a color removal of 100% was achieved after a reaction time of 45min. TOC elimination was measured to be 51.8% after 2h of oxidation. Initial decolorization rate was described by an equation of -rA0=4.56×102 e-24.83/RTCR6G,0CH2O2,00.35 where R is in kJ/mol. The leaching of iron and copper cations from zeolite structure into the solution during oxidation was dependent on pH strongly. The regulation of pH from 6.5 (dye solution pH) to 3.4, increased leaching for iron from 0.7 to 0.8mg/dm3 and for copper from 1.4 to 2.1mg/dm3. The copper was totally leached from the catalyst during the process at pH 3.4. © 2010 Elsevier B.V.Article Citation - WoS: 9Citation - Scopus: 10Hydrogenation of Citral Over Ni and Ni-Sn Catalysts(TUBITAK, 2008) Aykaç, Hilal; Yılmaz, SelahattinLiquid phase citral hydrogenation over zeolite-supported monometallic Ni and bimetallic Ni-Sn catalysts was studied. The zeolite support materials were Na-Y, Na-mordenite, and clinoptilolite. Ni and Sn contents of the monometallic and bimetallic catalysts were 8.1-9.2 wt% and 0.46 wt%, respectively. The type of the zeolite support affected the activity and selectivity of the catalysts differently. The main product of the citral hydrogenation reaction was citronellal, for both monometallic (84.5% yield) and bimetallic (44.5% yield) catalysts. The addition of promoter increased the selectivity to unsaturated alcohols (geraniol+nerol), i.e. it changed from 0.9% to 6.3% over mordenite and from 0.9% to 2.1% over Na-Y-supported catalysts. Furthermore, activity of the Ni catalysts decreased while the quantity of acetal remained almost constant. Intimate contact between active metal, promoter, and support, and a catalyst with a high concentration of weak acid sites gave high selectivity to geraniol+nerol.Article Citation - WoS: 11Citation - Scopus: 13Liquid-Phase Oxidation of Carvacrol Using Zeolite-Encapsulated Metal Complexes(American Chemical Society, 2006) Güneş, Alev; Bayraktar, Oğuz; Yılmaz, SelahattinWe report here the use of zeolite-encapsulated metal (salpn) complexes as catalysts in the oxidation reaction of the natural compound carvacrol in acetonitrile with hydrogen peroxide as the oxidant. No previous studies on the oxidation of carvacrol in the presence of metal salpn complexes have been reported. By using a general flexible ligand method, Cr(III), Fe(III), Bi(III), Ni(II), and Zn(II) complexes of N,N′-bis(salicylidene)propane1,3-diamine (H2salpn) encapsulated in NaY zeolite were prepared. All catalysts were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses to confirm the complex encapsulation. The activities of all prepared catalysts for the oxidation of carvacrol and hydrogen peroxide were tested. The performances of all catalysts were compared on the basis of the leaching test results and carvacrol conversions. Thymohydroquinone and benzoquinones were observed as byproducts at high conversions of carvacrol. No product was formed in the absence of a catalyst. Fe(salpn)-NaY catalyst exhibited the highest carvacrol conversion of 27.6% with a yield of 22.0%, followed by Cr(salpn)-NaY catalyst with 23.5% carvacrol conversion and a yield of 17.6%. Other catalysts have shown relatively lower performances in terms of carvacrol conversion and leaching. The Cr(salpn)-NaY catalyst was found to be a more efficient catalyst than others on the basis of leaching and activity tests. With the selected catalyst Cr (salpn)-NaY, the effects of temperature and carvacrol/hydrogen peroxide molar ratio on carvacrol oxidation reactions were investigated. Increasing the temperature from 40 to 60 °C caused an increase in the thymoquinone yield from 6.2% to 16.0%. An increase in carvacrol/hydrogen peroxide molar ratio from 1 to 3 resulted in a decrease in the thymoquinone yield.Article Citation - WoS: 4Citation - Scopus: 4A Chromatographic Study of Carbon Monoxide Adsorption on a Clinoptilolite-Containing Natural Zeolitic Material(Taylor and Francis Ltd., 2004) Narin, Güler; Yılmaz, Selahattin; Ülkü, SemraIn this study, the equilibrium and kinetic parameters for CO adsorption on clinoptilolite-rich natural zeolitic material were determined by the concentration pulse chromatography technique. Experiments were carried out at different column temperatures (60-120°C) and interstitial carrier gas velocities (3.1-16.3 cm/s) using a clinoptilolite-rich natural zeolitic material packed column. The equilibrium and kinetic parameters were determined by matching the moments of the experimentally obtained response curves to the parameters in the mathematical model. The Henry's Law constants were found to decrease from 700 to 49 with increasing temperature. The heat of adsorption at low coverage was found to be 50.73 kJ/molK. The contributions from external film, macropore, and micropore diffusion resistances to mass transfer were determined, and the micropore diffusion resistance was found to be the major contributor. The micropore diffusivity as a function of crystal radius (Dc/rc 2) was determined and found to change between 5.72 × 10-4 and 1.34 × 10-2 s-1 in the temperature range studied.