Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Filters

20112

Settings

Language: search.filters.language.enSubject: search.filters.subject.Amine-functionalized silica

Search Results

Now showing 1 - 2 of 2
  • Article
    Citation - WoS: 50
    Synthesis of Aminopropyl Triethoxysilane-Functionalized Silica and Its Application in Speciation Studies of Vanadium(iv) and Vanadium(v)
    (Elsevier Ltd., 2011) Erdem, Aslı; Shahwan, Talal; Çağır, Ali; Eroğlu, Ahmet Emin
    A solid phase extraction sorbent, aminopropyl triethoxysilane-functionalized silica was prepared and used for vanadium speciation prior to inductively coupled plasma mass spectrometric determination. The necessary sorption parameters such as sorption pH, reaction temperature, sorbent amount and sample volume were optimized. The sorption for V(V) and V(IV) under the optimized conditions was 98% (±1) and was lower than 10%, respectively. The sorption process was investigated both from a kinetic perspective and also in terms of Freundlich, Dubinin-Radushkevich and Langmuir isotherm models to characterize the uptake of vanadate ion by the functionalized silica. Desorption from the sorbent was realized with 0.5 mol L−1 thiourea prepared in 0.2 mol L−1 HCl. Among the possible interfering species tested, Te(IV), Se(IV), Se(VI) and Fe(III) showed interference effects with V(V) signal. The validity of the method was first checked via spike recovery experiments with four different types of water; namely ultra pure, bottled drinking, tap, and sea water for different concentrations of V(V). The percent recovery values changed between 87 and 108 for all water types. The accuracy of the proposed methodology was also checked by analyzing a standard reference material (NIST, SRM 1643e) and a good agreement was found between the determined and the certified value. The proposed methodology has also been shown to be applicable for the separate sorption of V(V) in the absence/presence of V(IV) and for the sorption of both V(IV) and V(V) in waters. The amount of V(IV) can then be determined from the difference.
  • Article
    Citation - WoS: 46
    Synthesis, Characterization and Application of a Novel Mercapto- and Amine-Bifunctionalized Silica for Speciation/Sorption of Inorganic Arsenic Prior To Inductively Coupled Plasma Mass Spectrometric Determination
    (Elsevier Ltd., 2011) Boyacı, Ezel; Çağır, Ali; Shahwan, Talal; Eroğlu, Ahmet Emin
    A bifunctional sorbent, (NH2 + SH)silica, containing both amine and mercapto functionalities was prepared by modification of silica gel with 3-(triethoxysilyl)propylamine and (3-mercaptopropyl)trimethoxysilane. In addition to the bifunctional sorbent, silica gel was modified individually with the functional mercapto- and amino-silanes, and the mono-functional sorbents, namely (SH)silica and (NH2)silica, were also mechanically mixed ((NH2)silica + (SH)silica) for the sake of comparison of sorption performances. It has been demonstrated that (SH)silica shows quantitative sorption only to As(III) at two pH values, 1.0 and 9.0, while (NH2)silica displays selectivity only towards As(V) at pH 3.0. On the other hand, the bifunctional (NH2 + SH)silica possesses the efficient features of the two mono-functionalized sorbents; for example, it retains As(III) at a wider pH range, from 1.0 to at least 9.0 with the exception at pH 2.0, and it also shows quantitative sorption to As(V) at pH 3.0. This property gives the bifunctional (NH2 + SH)silica a better flexibility in terms of sorption performance as a function of solution pH. The mechanically mixed (NH2)silica + (SH)silica exhibits a similar but less efficient sorption behavior compared to the bifunctional sorbent. Desorption of both As(III) and As(V) species can be realized using 0.5 M NaOH. The validity of the proposed method was checked through the analysis of a standard reference material and a good correlation was obtained between the certified (26.67 μg L−1) and determined (27.53 ± 0.37 μg L−1) values. Spike recovery tests realized with ultrapure water (93.0 ± 2.3%) and drinking water (86.9 ± 1.2%) also confirmed the applicability of the method.