Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - Scopus: 7How Do the Influent Cod/Nitrogen and Internal Recirculation Ratios Affect the Oxidation Ditch Type Pre-Anoxic Landfill Leachate Treatment?(Academic Press, 2021) Çakirgöz,M.; Bayrakdar,A.; Çalli,B.A design-based dynamic simulation tool was developed to evaluate the effects of altered operation conditions on the performance of a landfill leachate treating pre-anoxic oxidation ditch folowed by external ultra filtration and nano filtration membranesby using the actual influent data and operational constants collected for 18 months. In the summer of 2017, the MBR suffered from reduced membrane fluxes due to deterioration of activated sludge flocs after the failure of flow booster providing the internal circulation and decreasing influent C/N ratio. Although two external pumps were activated in place of the broken flow booster, the required internal recirculation ratio (IR) predicted by the simulation could not be provided. It was concluded that due to low IR, the activated sludge retaining longer in the anoxic tank lost its floc integrity and caused decreased membrane fluxes. Simulation findings also showed that if the COD/N ratio drops below 4.8, no matter how high the IR is, it is unlikely to achieve a NOx-N concentration below 30 mg/l in the effluent. On the other hand, contrary to expectations, both the actual and estimated nitrification efficiencies were very high due to the moderately high temperature (>20 °C) and DO (2–3 mg/l) values in the aerobic basin. © 2020 Elsevier LtdArticle Citation - WoS: 24Citation - Scopus: 23Graphene Oxide Bionanocomposite Coatings With High Oxygen Barrier Properties(MDPI Multidisciplinary Digital Publishing Institute, 2016) Uysal Ünalan, İlke; Boyacı, Derya; Ghaani, Masoud; Trabattoni, Silvia; Farris, StefanoIn this work, we present the development of bionanocomposite coatings on poly(ethylene terephthalate) (PET) with outstanding oxygen barrier properties. Pullulan and graphene oxide (GO) were used as main polymer phase and nanobuilding block (NBB), respectively. The oxygen barrier performance was investigated at different filler volume fractions (φ) and as a function of different relative humidity (RH) values. Noticeably, the impermeable nature of GO was reflected under dry conditions, in which an oxygen transmission rate (OTR, mL m-2 24 h-1) value below the detection limit of the instrument (0.01 mL m-2 24 h-1) was recorded, even for ' as low as 0.0004. A dramatic increase of the OTR values occurred in humid conditions, such that the barrier performance was totally lost at 90% RH (the OTR of coated PET films was equal to the OTR of bare PET films). Modelling of the experimental OTR data by Cussler’s model suggested that the spatial ordering of GO sheets within the main pullulan phase was perturbed because of RH fluctuations. In spite of the presence of the filler, all the formulations allowed the obtainment of final materials with haze values below 3%, the only exception being the formulation with the highest loading of GO (φ 0.03). The mechanisms underlying the experimental observations are discussed.