Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
9 results
Search Results
Now showing 1 - 9 of 9
Article Citation - WoS: 3Citation - Scopus: 3Roadmap on Multifunctional Materials for Drug Delivery(IOP Publishing, 2024) Nottelet, Benjamin; Buwalda, Sytze; van Nostrum, Cornelus F.; Zhao, Xiaofei; Deng, Chao; Zhong, Zhiyuan; Cheah, Ernest; Kehr, Nermin SedaThis Roadmap on drug delivery aims to cover some of the most recent advances in the field of materials for drug delivery systems (DDSs) and emphasizes the role that multifunctional materials play in advancing the performance of modern DDSs in the context of the most current challenges presented. The Roadmap is comprised of multiple sections, each of which introduces the status of the field, the current and future challenges faced, and a perspective of the required advances necessary for biomaterial science to tackle these challenges. It is our hope that this collective vision will contribute to the initiation of conversation and collaboration across all areas of multifunctional materials for DDSs. We stress that this article is not meant to be a fully comprehensive review but rather an up-to-date snapshot of different areas of research, with a minimal number of references that focus upon the very latest research developments.Review Citation - Scopus: 121Natural and Synthetic Nanovectors for Cancer Therapy(Ivyspring International Publisher, 2023) Eftekhari, Aziz; Kryschi, Carola; Pamies, David; Ahmadian, Elham; Janas, Dawid; Davaran, Soodabeh; Khalilov, Rovshan; Güleç, ŞükrüNanomaterials have been extensively studied in cancer therapy as vectors that may improve drug delivery. Such vectors not only bring numerous advantages such as stability, biocompatibility, and cellular uptake but have also been shown to overcome some cancer-related resistances. Nanocarrier can deliver the drug more precisely to the specific organ while improving its pharmacokinetics, thereby avoiding secondary adverse effects on the not target tissue. Between these nanovectors, diverse material types can be discerned, such as liposomes, dendrimers, carbon nanostructures, nanoparticles, nanowires, etc., each of which offers different opportunities for cancer therapy. In this review, a broad spectrum of nanovectors is analyzed for application in multimodal cancer therapy and diagnostics in terms of mode of action and pharmacokinetics. Advantages and inconveniences of promising nanovectors, including gold nanostructures, SPIONs, semiconducting quantum dots, various nanostructures, phospholipid-based liposomes, dendrimers, polymeric micelles, extracellular and exome vesicles are summarized. The article is concluded with a future outlook on this promising field. © The author(s).Review Citation - WoS: 52Citation - Scopus: 56Spheroid engineering in microfluidic devices(American Chemical Society, 2023) Tevlek, Atakan; Keçili, Seren; Özçelik, Özge Solmaz; Kulah, Haluk; Tekin, H. CumhurTwo-dimensional (2D) cell culture techniques are commonly employed to investigate biophysical and biochemical cellular responses. However, these culture methods, having monolayer cells, lack cell-cell and cell-extracellular matrix interactions, mimicking the cell microenvironment and multicellular organization. Three-dimensional (3D) cell culture methods enable equal transportation of nutrients, gas, and growth factors among cells and their microenvironment. Therefore, 3D cultures show similar cell proliferation, apoptosis, and differentiation properties to in vivo. A spheroid is defined as self-assembled 3D cell aggregates, and it closely mimics a cell microenvironment in vitro thanks to cell-cell/matrix interactions, which enables its use in several important applications in medical and clinical research. To fabricate a spheroid, conventional methods such as liquid overlay, hanging drop, and so forth are available. However, these labor-intensive methods result in low-throughput fabrication and uncontrollable spheroid sizes. On the other hand, microfluidic methods enable inexpensive and rapid fabrication of spheroids with high precision. Furthermore, fabricated spheroids can also be cultured in microfluidic devices for controllable cell perfusion, simulation of fluid shear effects, and mimicking of the microenvironment-like in vivo conditions. This review focuses on recent microfluidic spheroid fabrication techniques and also organ-on-a-chip applications of spheroids, which are used in different disease modeling and drug development studies.Article Citation - WoS: 1Citation - Scopus: 1Fabrication and in Vitro Evaluation of Thermally Cross-Linked Gelatin Nanofibers for Drug Delivery Applications(Taylor & Francis, 2022) Mete, Derya; Göktaş, Gözde; Şanlı Mohamed, GülşahIn this study, four different nanofibers consisting of gelatin (Gel), doxorubicin (DOX) with gel (DOX@Gel), a composite of gel with poly(ethylene glycol) (PEGylated-gel), and DOX@PEGylated-gel were fabricated. Subsequently, the nanofibers were thermally cross-linked in order to offer a stable and biocompatible alternative for the biological applications of nanofibers such as drug delivery and tissue engineering. Nanofibers were characterized by scanning electron microscopy, Fourier Transform-Infrared Spectroscopy (FT-IR), and confocal microscopy. The formation of smooth, continuous, and uniform nanofibers was observed and the addition of PEG resulted in an increase whereas the incorporation of DOX into nanofibers had no significant change in the diameter of nanofibers. Crosslinking also enlarged the diameter of all nanofibers and the most dramatic increase was observed 53% by DOX@PEGylated-gel. Afterward, the biological performance of the nanofibers was investigated by drug release profile, cytotoxicity on A549 cell line as well as antimicrobial activity with E. coli and S. aureus. The results indicate an enhanced drug release profile, moderate antimicrobial activity, and reasonable cytotoxic efficiency for thermally cross-linked nanofibers compared to uncross-linked nanofibers.Article Citation - WoS: 1Citation - Scopus: 1Potansiyel Doksorubisin Taşıyıcı Sistemi Olarak Peg-endozom Parçalayıcı Peptit Konjugatının Değerlendirilmesi(Gazi Üniversitesi, 2020) Şen, Selin; Top, AybenIn this study, it was aimed to develop a doxorubicin (DOX) carrier system based on a PEGylated TAT-derived cell penetrating peptide (G(2)RQR(3)QR(3)G(2)S) and to investigate drug release, self-assembly and stability properties of the carrier system. In the preparation of the drug delivery system, denoted as mPEG-peptide-oxime-DOX, methoxypolyethylene glycol (mPEG) with M-n=1900 Da was used. DOX was attached to the mPEG-peptide carrier system via acid cleavable oxime bond. Control drug delivery system, lack of the peptide (mPEG-oxime-DOX) was also synthesized to assess the effect of the peptide on the physicochemical and DOX release properties of the carrier system. mPEG-oxime-DOX exhibited a pH programmed DOX release with respective % DOX release values of similar to 68% and similar to 28% at pH 5.0 and at pH 7.4 at the end of 54 h. For the mPEG-peptide-oxime-DOX, on the other hand, quite low DOX release (similar to 10-15 %) was observed for both pH values suggesting possible interactions between DOX and the peptide. Initial median size value (D50) of the mPEG-oxime-DOX was measured as similar to 24 nm, independent of pH. However, for the mPEG-peptide-oxime-DOX, quite lower D50 values (similar to 3 nm and similar to 6 nm at pH 5.0 and pH 7.4, respectively) were obtained due to the repulsions between the arginines in the peptide sequence. Sizes of both drug delivery systems, tended to increase upon incubation at physiological conditions for 1 day suggesting that longer PEG chains should be used to enhance the stability of the mPEG-peptide-oxime-DOX and mPEG-oximeDOX systems.Article Citation - WoS: 12Citation - Scopus: 12Peg and Peg-Peptide Based Doxorubicin Delivery Systems Containing Hydrazone Bond(Springer Verlag, 2018) Balcı, Beste; Top, AybenmPEG and mPEG-peptide based drug delivery systems were prepared by conjugating doxorubicin (DOX) to these carrier molecules via hydrazone bond. The peptide, AT1, with a sequence of CG3H6G3E served as mPEG and doxorubicin attachment site. Histidines were incorporated to the sequence to improve pH responsiveness of the carrier molecule. Hydrodynamic diameters (mean sizes) of mPEG-based drug delivery system (mPEG-HYD-DOX) were measured as 9 ± 0.5 and 7 ± 0.5 nm at pH 7.4 and pH 5.0, respectively. Mean size of the aggregates of the peptide containing drug delivery system, mPEG-AT1-DOX, was determined as 12 ± 2 nm at neutral pH. At pH 5.0, on the other hand, mPEG-AT1-DOX exhibited a size distribution between 20 and 100 nm centered at about 40 nm. Comparison of % DOX release values of the drug delivery systems obtained at pH 7.4 and pH 5.0 indicated that mPEG-AT1-DOX has enhanced pH sensitivity. DOX equivalent absolute IC50 values were obtained as 0.96 ± 0.51, 21.9 ± 5.9, and 5.55 ± 0.75 μg/mL for free DOX, mPEG-HYD-DOX, and mPEG-AT1-DOX, respectively. Considering more pronounced pH sensitivity and cytotoxicity of mPEG-AT1-DOX, the use of both pH responsive functional groups and acid cleavable chemical bond between the carrier molecule and drug can be a promising approach in the design of drug delivery systems for cancer therapy.Article Citation - WoS: 50Citation - Scopus: 50Hierarchically Porous Polymer Derived Ceramics: a Promising Platform for Multidrug Delivery Systems(Elsevier Ltd., 2018) Vakıfahmetoğlu, Çekdar; Zeydanlı, Damla; Özalp, Veli Cengiz; Borsa, Barış Ata; Soraru, Gian DomenicoMesoporous silicon oxycarbide (SiOC) components were formed with the use of “molecular spacer” (a sacrificial vinyl-terminated linear siloxane which while decomposing during pyrolysis generates pores with size proportional to the molecular weight), followed by a post-pyrolysis etching treatment by hydrofluoric acid (HF) to obtain C-rich SiOC samples having additional micro-/mesoporosity and specific surface area reaching to 774 m2/g. The biocompatibility of the samples was validated by hemolysis test, and their cargo/drug loading capacities were studied by two different sized polypeptides as model molecules. SiOC particles showed less hemolysis compared to the reference material MCM-41. Similarly, the loading capacity and the release kinetics of bovine serum albumin (BSA) and vancomycin-loaded SiOC particles were improved compared to that of MCM-41. In the multi cargo loading/release capacity tests, done by using different sized molecules, Bio2-HF and MCM-41 were loaded both with fluorescein and BSA. While a lagging time in fluorescein release was observed for MCM-41, the release kinetics of fluorescein and BSA was not affected when they are loaded together in the hierarchical pores of Bio2-HF, allowing the release of both large and small cargo molecules. The antimicrobial activity tests showed that Bio2-HF performed better than MCM-41 particles in improving bactericidal activity.Article Citation - WoS: 42Citation - Scopus: 47Ph Responsive Glycopolymer Nanoparticles for Targeted Delivery of Anti-Cancer Drugs(Royal Society of Chemistry, 2018) Yılmaz, Gökhan; Güler, Emine; Geyik, Caner; Demir, Bilal; Özkan, Melek; Odacı Demirkol, Dilek; Özçelik, Serdar; Timur, Suna; Becer, C. RemziOver the past decade, there has been a great deal of interest in the integration of nanotechnology and carbohydrates. The advances in glyconanotechnology have allowed the creation of different bioactive glyconanostructures for different types of medical applications, especially for drug delivery and release systems. Therefore, the use of more efficient biocompatible nanocarriers with high loading capacity, low overall toxicity and receptor-mediated endocytosis specificity is still in focus for the enhancement of the therapeutic effect. Conjugation of sugar derivatives onto gold nanoparticles presents unique properties that include a wide array of assembling models and size-related electronic, magnetic and optical properties. Here, pH-responsive drug-conjugated glycopolymer-coated gold nanoparticles were prepared by functionalization of gold nanoparticles with thiol-terminated glycopolymers and then subsequent conjugation of doxorubicin (DOX). Among the four different glycopolymers, their drug release, physicochemical characterization (spectroscopy, particle size and surface charge) and in vitro bioapplications with four different cell lines were compared. As a result, pH-sensitive drug delivery via sugar-coated AuNPs was performed thanks to hydrazone linkages between glycopolymers and DOX. Comparative viability tests also demonstrated the efficiency of glycopolymer-DOX conjugates by fluorescence cell imaging. The obtained results reveal that AuNP homoglycopolymer DOX conjugates (P4D) have significant potential, especially in human neuroblastoma cells in comparison to cervical cancer cells and lung cancer cells.Article Citation - WoS: 12Citation - Scopus: 12Controlling Assembly of Helical Polypeptides Via Pegylation Strategies(Royal Society of Chemistry, 2011) Top, Ayben; Zhong, Sheng; Yan, Congqi; Roberts, Christopher J.; Pochan, Darrin J.; Kiick, Kristi L.Recent studies in our laboratories have demonstrated that a helical polypeptide (17H6), equipped with a histidine tag and a helical alanine-rich, glutamic-acid-containing domain, exhibits pH-responsive assembly behavior useful in the production of polymorphological nanostructures. In this study, the histidine tag in these polypeptides was replaced by polyethylene glycol (PEG) with different molecular masses (5 kDa, or 10 kDa), and the self-association behavior of 17H6 and the PEGylated conjugates was characterized via dynamic light scattering (DLS), small angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM). DLS experiments illustrated that the polypeptide and its PEG-conjugates undergo reversible assembly under acidic conditions, suggesting that the aggregation state of the polypeptide and the conjugates is controlled by the charged state of the glutamic acid residues. Nanoscale aggregates were detected at polypeptide/conjugate concentrations as low as 20 μM (∼0.3-0.5 mg ml -1) at physiological and ambient temperatures. Scattering and microscopy results showed that the size, the aggregation number, and the morphology of the aggregates can be tuned by the size and the nature of the hydrophilic tag. This tunable nature of the morphology of the aggregates, along with their low critical aggregation concentration, suggests that PEG-alanine-rich polypeptide conjugates may be useful as drug delivery vehicles in which the alanine-rich block serves as a drug attachment domain.