Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 17Citation - Scopus: 16Development of Cissus Quadrangularis-Loaded Poss-Reinforced Chitosan-Based Bilayer Sponges for Wound Healing Applications: Drug Release and in Vitro Bioactivity(American Chemical Society, 2023) Değer Aker, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, FundaNowadays, antibiotic-loaded biomaterials have been widelyusedin wound healing applications. However, the use of natural extractshas come into prominence as an alternative to these antimicrobialagents in the recent period. Among natural sources, Cissus quadrangularis (CQ) herbal extract is usedfor treatment of bone and skin diseases in ayurvedic medicine dueto its antibacterial and anti-inflammatory effects. In this study,chitosan-based bilayer wound dressings were fabricated with electrospinningand freeze-drying techniques. CQ extract-loaded chitosan nanofiberswere coated on chitosan/POSS nanocomposite sponges using an electrospinningmethod. The bilayer sponge is designed to treat exudate wounds whilemimicking the layered structure of skin tissue. Bilayer wound dressingswere investigated with regard to the morphology and physical and mechanicalproperties. In addition, CQ release from bilayer wound dressings and in vitro bioactivity studies were performed to determinethe effect of POSS nanoparticles and CQ extract loading on NIH/3T3and HS2 cells. The morphology of nanofibers was investigated withSEM analysis. Physical characteristics of bilayer wound dressingswere determined with FT-IR analysis, swelling study, open porositydetermination, and mechanical test. The antimicrobial activity ofCQ extract released from bilayer sponges was investigated with a discdiffusion method. Bilayer wound dressings' in vitro bioactivity was examined using cytotoxicity determination, woundhealing assay, proliferation, and the secretion of biomarkers forskin tissue regeneration. The nanofiber layer diameter was obtainedin the range of 77.9-97.4 nm. The water vapor permeabilityof the bilayer dressing was obtained as 4021 to 4609 g/m(2)day, as it is in the ideal range for wound repair. The release ofthe CQ extract over 4 days reached 78-80% cumulative release.The release media were found to be antibacterial against Gram-negativeand Gram-positive bacteria. In vitro studies showedthat both CQ extract and POSS incorporation induced cell proliferationas well as wound healing activity and collagen deposition. As a result,CQ-loaded bilayer CHI-POSS nanocomposites were found as a potentialcandidate for wound healing applications.Article Citation - WoS: 6Citation - Scopus: 6First-Principles Study of Dissociation Processes for the Synthesis of Fe and Co Oxide Nanoparticles(American Chemical Society, 2018) Özdamar, Burak; Bouzid, Assil; Ori, Guido; Massobrio, Carlo; Boero, MauroThermal decomposition is a practical and reliable tool to synthesize nanoparticles with monodisperse size distribution and reproducible accuracy. The nature of the precursor molecules and their interaction with the environment during the synthesis process have a direct impact on the resulting nanoparticles. Our study focuses on widely used transition-metal (Co, Fe) stearates precursors and their thermal decomposition reaction pathway. We show how the nature of the metal and the presence or absence of water molecules, directly related to the humidity conditions during the synthesis process, affect the decomposition mechanism and the resulting transition-metal oxide building blocks. This, in turn, has a direct effect on the physical and chemical properties of the produced nanoparticles and deeply influences their composition and morphology.Article Citation - WoS: 25Citation - Scopus: 23Synthesis and Characterization of Aicar and Dox Conjugated Multifunctional Nanoparticles as a Platform for Synergistic Inhibition of Cancer Cell Growth(American Chemical Society, 2016) Dağlıoğlu, Cenk; Okutucu, BurcuThe success of cancer treatment depends on the response to chemotherapeutic agents. However, malignancies often acquire resistance to drugs if they are used frequently. Combination therapy involving both a chemotherapeutic agent and molecularly targeted therapy may have the ability to retain and enhance therapeutic efficacy. Here, we addressed this issue by examining the efficacy of a novel therapeutic strategy that combines AICAR and DOX within a multifunctional platform. In this context, we reported the bottom-up synthesis of Fe3O4@SiO2(FITC)-FA/AICAR/DOX multifunctional nanoparticles aiming to neutralize survivin (BIRC5) to potentiate the efficacy of DOX against chemoresistance. The structure of nanoparticles was characterized by dynamic light scattering (DLS), zeta-potential measurement, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and electron microscopy (SEM and STEM with EDX) techniques. Cellular uptake and cytotoxicity experiments demonstrated preferentially targeted delivery of nanoparticles and an efficient reduction of cancer cell viability in five different tumor-derived cell lines (A549, HCT-116, HeLa, Jurkat, and MIA PaCa-2). These results indicate that the multifunctional nanoparticle system possesses high inhibitory drug association and sustained cytotoxic effect with good biocompatibility. This novel approach which combines AICAR and DOX within a single platform might be promising as an antitumor treatment for cancer.Article Citation - WoS: 64Citation - Scopus: 67Hierarchically Structured Metal Oxide/Silica Nanofibers by Colloid Electrospinning(American Chemical Society, 2012) Horzum Polat, Nesrin; Mun˜oz-Espí, Rafael; Glasser, Gunnar; Demir, Mustafa Muammer; Landfester, Katharina; Crespy, DanielWe present herein a new concept for the preparation of nanofibrous metal oxides based on the simultaneous electrospinning of metal oxide precursors and silica nanoparticles. Precursor fibers are prepared by electrospinning silica nanoparticles (20 nm in diameter) dispersed in an aqueous solution of poly(acrylic acid) and metal salts. Upon calcination in air, the poly(acrylic acid) matrix is removed, the silica nanoparticles are cemented, and nanocrystalline metal oxide particles of 4-14 nm are nucleated at the surface of the silica nanoparticles. The obtained continuous silica fibers act as a structural framework for metal oxide nanoparticles and show improved mechanical integrity compared to the neat metal oxide fibers. The hierarchically nanostructured materials are promising for catalysis applications, as demonstrated by the successful degradation of a model dye in the presence of the fibers.Article Citation - WoS: 15Citation - Scopus: 15Controlling Spontaneous Emission of Cdse Nanoparticles Dispersed in Electrospun Fibers of Polycarbonate Urethane(American Chemical Society, 2009) Demir, Mustafa Muammer; Soysal, Duygu; Ünlü, Caner; Kuş, Mahmut; Özçelik, SerdarLuminescent fibrous composite films consisting of submicrometer diameter fibers were prepared by electrospinning of segmented polycarbonate urethane (PCU) in dimethyl formamide and tri-n-octylphosphine oxide (TOPO)-capped CdSe nanocrystals (5 nm in diameter) in toluene. Using a pair of conductive electrodes separated with an air gap, we successfully produced randomly deposited and uniaxially aligned electrospun fibers. The surface structure of the electrospun fibers was studied using atomic force microscopy (AFM) and was compared to the corresponding film prepared by casting. In cast film, tapping mode AFM imaging suggests that hard urethane segments organize into rodlike morphology dispersed in soft polycarbonate. When PCU/ CdSe dispersions were subjected to electrospinning, copolymer domains were forced to arrange into lamella along the fiber axis due to elongational flow and high stretching. Molecular orientation in the domains of the composite fibers was confirmed by polarized infrared spectroscopy. We demonstrated that formation of the oriented domains by electrospinning develops a hierarchical structure, which consequently modifies spectral properties because new multiple sharp lines appeared in the photoluminescence (PL) spectra of the fibers. In contrast to randomly deposited fibers, the PL intensity of uniaxially aligned fibers was found to be angle dependent. We propose that the elongated internal structure within the fibers controls the spontaneous emission of CdSe nanoparticles dispersed throughout the electrospun mat. A discussion on the nature of the controlled spontaneous emission is provided.Article Citation - WoS: 119Citation - Scopus: 151Batch Removal of Aqueous Cu2+ Ions Using Nanoparticles of Zero-Valent Iron: a Study of the Capacity and Mechanism of Uptake(American Chemical Society, 2008) Karabelli, Duygu; Üzüm, Çağrı; Shahwan, Talal; Eroğlu, Ahmet Emin; Scott, Tom B.; Hallam, Keith R.; Lieberwirth, IngoIn this study, nZVI prepared by borohydride reduction was applied for the removal of Cu2+ ions under a variety of experimental conditions. The uptake experiments investigated the effects of initial concentration, contact time, pH, and repetitive loading on the extent of retardation of Cu2+ ions. Within the applied conditions, the sorbent demonstrated fast uptake kinetics and outstanding fixation abilities up to an initial Cu2+ concentration of 200.0 mg/L. Partitioning of Cu2+ ions between liquid and solid phases demonstrated an isotherm of L-type. Within the studied conditions, the capacity of uptake was found to be 250 mg of Cu2+ per g of nZVI. According to X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) results, Cu2+ ions were sorbed primarily via a redox mechanism that resulted in the formation of Cu2O and Cu0. The contact of iron nanoparticles with aqueous media caused extensive formation of iron oxide. However, the material did not completely lose its removal capacity and was repeatedly applied at low concentrations for further uptake trials.