Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Now showing 1 - 7 of 7
Article Citation - WoS: 5Citation - Scopus: 6The Varying Densification Strain in a Multi-Layer Aluminum Corrugate Structure: Direct Impact Testing and Layer-Wise Numerical Modelling(Elsevier Ltd., 2017) Odacı, İsmet Kutlay; Güden, Mustafa; Kılıçaslan, Cenk; Taşdemirci, AlperAn aluminum (1050 H14) multi-layer corrugated structure composed of brazed 16 trapezoidal zig-zig fin layers was direct impact tested above the critical velocities for shock formation using a modified Split Hopkinson Pressure Bar. The experimentally measured stress-time histories of the cylindrical test samples in the direct impact tests were verified with the simulations implemented in the explicit finite element code of LS–DYNA. The quasi-static experimental and simulation deformation of the corrugated samples proceeded with the discrete, non-contiguous bands of crushed fin layers, while the dynamic crushing started from the proximal impact end and proceeded with a sequential and in-planar manner, showing shock type deformation characteristic. The experimental and numerical crushing stresses and the numerically determined densification strains of the fin layers increased with increasing impact velocity above the critical velocities. When the numerically determined densification strain at a specific velocity above the critical velocities was incorporated, the rigid-perfectly-plastic-locking idealized model resulted in peak stresses similar to the experimental and simulation mean crushing stresses. However, the model underestimated the experimental and simulation peak stresses below 200 m s−1. It was proposed, while the micro inertial effects were responsible for the increase of the crushing stresses at and below subcritical velocities, the shock deformation became dominant above the critical velocities.Article Citation - WoS: 32Citation - Scopus: 35Liquid Phase Transformation of ?-Pinene Over Beta Zeolites Containing Aluminium or Boron, Titanium and Vanadium as Lattice Ions(Elsevier Ltd., 2005) Gündüz, Gönül; Dimitrova, Raina D.; Yılmaz, Selahattin; Dimitrov, LjubomirBeta zeolites with different modules (SiO2/Al2 O3) and containing B, Ti or V in lattice positions were synthesised by different methods and tested as catalysts in liquid phase transformation of α-pinene at 100 °C in a batch reactor. It was established that the hydrogen forms of Beta samples with a SiO2/Al2O3 module of about 55-66 and containing both micro- and mesopores displayed high catalytic activity in liquid phase isomerization of α-pinene. Samples with boron, titanium or vanadium, as lattice ions possess insignificant catalytic activity.Article Citation - WoS: 104Citation - Scopus: 115An Exposure and Risk Assessment for Fluoride and Trace Metals in Black Tea(Elsevier Ltd., 2008) Sofuoğlu, Sait Cemil; Kavcar, PınarExposure and associated health risks for fluoride and trace metals in black tea were estimated. Fifty participants were randomly recruited to supply samples from the tea that they drink, and self-administer a questionnaire that inquired about personal characteristics and daily tea intake. Analyzed trace metals included aluminum, arsenic, barium, cadmium, cobalt, chromium, copper, manganese, nickel, strontium, and zinc. Fluoride and four metals (Al, Cr, Mn, Ni) were detected in all samples while barium was detected only in one sample. The remaining metals were detected in >60% of the samples. Fluoride and aluminum levels in instant tea bag samples were greater than in loose tea samples (p < 0.05) while the differences in elemental concentrations of loose and pot bag tea samples were not significant. Median and 90th percentile daily tea intake rates were estimated as 0.35 and 1.1 l/day, respectively. Neither fluoride nor aluminum levels in black tea were found to associate with considerable risks of fluorosis and Alzheimer's disease, respectively. However, carcinogenic risk levels for arsenic were high; R > 1.0 × 10-6 even at the median level. According to sensitivity analysis, daily tea intake was the most influencing variable to the risk except for arsenic for which the concentration distribution was of more importance.Article Citation - WoS: 71Citation - Scopus: 81The Impact Responses and the Finite Element Modeling of Layered Trapezoidal Corrugated Aluminum Core and Aluminum Sheet Interlayer Sandwich Structures(Elsevier Ltd., 2013) Kılıçaslan, Cenk; Güden, Mustafa; Odacı, İsmet Kutlay; Taşdemirci, AlperThe impact responses of brazed and adhesively bonded layered 1050 H14 trapezoidal corrugated aluminum core and aluminum sheet interlayer sandwich panels with 3003 and 1050 H14 aluminum alloy face sheets were investigated in a drop weight tower using spherical, flat and conical end striker tips. The full geometrical models of the tests were implemented using the LS-DYNA. The panels tested with spherical and flat striker tips were not penetrated and experienced slightly higher deformation forces and energy absorptions in 0°/90° corrugated layer orientation than in 0°/0° orientation. However, the panels impacted using a conical striker tip were penetrated/perforated and showed comparably smaller deformation forces and energy absorptions, especially in 0°/90° layer orientation. The simulation and experimental force values were shown to reasonably agree with each other at the large extent of deformation and revealed the progressive fin folding of corrugated core layers and bending of interlayer sheets as the main deformation mechanisms. The experimentally and numerically determined impact velocity sensitivity of the tested panels was attributed to the micro inertial effects which increased the critical buckling loads of fin layers at increasingly high loading rates.Article Citation - WoS: 47Citation - Scopus: 62Transverse and Longitudinal Crushing of Aluminum-Foam Filled Tubes(Elsevier Ltd., 2002) Hall, Ian W.; Güden, Mustafa; Claar, Terry DennisAl-foam filled and empty tubes of aluminum, brass and titanium were compression tested laterally. The specific energy absorption in filled tubes increased greatly in terms of percentages, and was greatest in aluminum tubes. In transversely tested tubes the foam deformed laterally showing a capability of spreading the deformation.Article Citation - WoS: 194Citation - Scopus: 227Dynamics of Metal Foam Deformation During Taylor Cylinder–hopkinson Bar Impact Experiment(Elsevier Ltd., 2003) Lopatnikov, Sergey L.; Gama, Bazle A.; Haque, Jahirul; Krauthauser, Carl; Gillespie, John W.; Güden, Mustafa; Hall, Ian W.Analytical solutions for dynamic deformation of foam materials during the Taylor cylinder–Hopkinson bar impact experiment were obtained. It was shown that shock wave of foam collapse appears during the fast impact. The results of this experiment can be used in estimating the average material properties of the foam under dynamic loading conditions. Results show that the un-deformed and change in length of foam specimens are in good agreement between theory and experiment, as well as numerical analysis.Article Citation - WoS: 124Citation - Scopus: 136Crushing of Aluminum Closed Cell Foams: Density and Strain Rate Effects(Elsevier Ltd., 2000) Hall, Ian W.; Güden, Mustafa; Yu, C.-JThe quasi-static and high strain rate compression behavior of an Al closed cell foam was examined in detail. The compression flow stress of the foam was a function of the relative density but exhibits little or no strain rate density. In addition to the flow stress, the energy absorption was also related to the foam density by a similar power law dependency. Metallographic observations of compressively deformed foam confirmed the general processes of progressive cell wall collapse.